Netware 386 tcp/ip link to SCO Unix

[Michael Squires]

In article <1990Nov13.180514.14393 at momenta> gregpf at momenta (Greg Presedo-Floyd) writes:

>the following. (1) Install tcp/ip on the SCO Unix 486.  (2) Try to use
>the same "telnet" I am using now from my PC to get to the 486.  You
>didn't say which "SVR3 Unix" you were running, but this should work.
>

I'm currently sending this message from an AST 286 PC with WD8003E card
running under DESQView connected via NCSA Telnet 2.3 beta 11 to an
SCO ODT (SCO UNIX 3.2.1) 486 box.

"ftp" from the SCO box to the PC also works fine (when NCSA Telnet is
running in server mode).
-- 

Mike Squires (mikes at iuvax.cs.indiana.edu)     812 855 3974 (w) 812 333 6564 (h)
mikes at iuvax.cs.indiana.edu          546 N Park Ridge Rd., Bloomington, IN 47408
Under construction: mikes at sir-alan@cica.indiana.edu