<25 at opel.COM>

[Tin Le]

>->Is it possible to allow 2 different types of hard disks in a pc UNIX
>->environment (using 2 different controllers)?
>-
>-When I installed Interactive Unix 2.2 I attempted to use an ST-506 primary
>-controller and an Adaptec 1542B SCSI controller as secondary.  After
>-a *day* of re-building kernels and plugging and un-plugging controllers,
>-with nary a kernel that would boot, I gave up.  Fortunately, the SCSI
>-controller has floppy ports, so I decided to toss the ST-506, two MFM
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^
  That could be your problem, if both ctrlr has floppy ports, you will
  need to disable the floppy on one of them.

>-drives, and use only the SCSI.

This should work fine.  I am currently using a WD 1003 (ST 506) with 2
HDs, and a Seagate ST-02 SCSI ctlr with a CDC Wren IV.  All 3 drives works
great.  I just can't boot off the SCSI because I don't have boot driver
for it.  The configuration is ISC 386/ix v2.0.2 and I am using my modified
version of the ST-01 driver from Tatu Ylonen (which I'll be posting soon
to alt.sources).

-- Tin Le

-- 
. ---------------------------------------------------------------
. tin at smsc.sony.com | {uunet,mips}!sonyusa!tin
. (408) 944-4157