Adding second HD under ISC 2.0.2

[Gary Sanders]

In article <3440010 at hparc0.HP.COM> paulg at hparc0.HP.COM (Paul Gillingwater) writes:
>>/ hparc0:comp.unix.sysv386 / chris at endgame.gsfc.nasa.gov (Chris Shenton) /  7:19 am  Feb 13, 1991 /
>>>In article <1991Feb12.150008.3737 at ux1.cso.uiuc.edu> brando at uicsl.csl.uiuc.edu (Brandon Brown) writes:
>
>   >>Well, speaking from experience, if you try to use a primary "AT" style 
>   >>controller with an Adaptec secondary controller with ISC 2.0.2, it won't
>   >>work. I had the exact same problem before I upgraded to ISCv 2.2.
>
	MY primary controllers is a WD1007 with a couple of 
160mb drives and two floppys hanging off of it. I would like  to
add a second controller, (mfm or rll) Will this work? Any specific
requirments needed by the controller for this to work.




>
>I have ISC 2.02, and have successfully installed an ESDI controller
>as the primary (boot) controller, and the Adaptec 1542A SCSI controller
>as secondary, with two drives and tape.


-- 
Gary W. Sanders (gws at n8emr or ...!osu-cis!n8emr!gws), 72277,1325
N8EMR @ W8CQK (ip addr) 44.70.0.1 [Ohio AMPR address coordinator]
HAM BBS (1200/2400/9600/V.32/PEP/MNP=L5) 614-895-2553
Voice: 614-895-2552 (eves/weekends)