X386 1.1; ProDeigner II + 4D for ESIX

Thu Feb 14 23:50:26 AEST 1991

Some requested it, so I'm posting this to both "comp.windows.x" and
"comp.unix.sysv386."

First, I've already made the offer to put X386 1.1 at an ftp site
here in the U.S., but I don't remember to whom this offer was made.
If you're interested in serving the public (  :-)  ), set up an ftp
account for me to put the 7348521 bytes.  These are the binaries for
SCO (I didn't test this) and ESIX (looks OK so far), tarred and then
compressed; the 694760-byte patch file is already avalable at zork (?). 

The parameters are for X386 1.1.  The only changes to Thomas Roell's
"Xconfig" are as follows:

1:  Display 290 217 

>From the NEC 4D manual.  You might like to adjust the screen size to
preserve the 4:3 aspect raio so a circle looks like a circle.

2:  # Orchid ProDesigner II/10224
    ET4000   1024   1152 900   25 28 40 36 "1024x768" # Orchid Prodesigner II

3:  # Orchid ProDesigner II and an NEC 4D
    "1024x768"  40    1152 1224 1328 1360    900  898  929  939   Interlace

Provided by Kayvan Sylvan.  I tried all sorts of combinations, but 
his parameters worked best.  Note that this is an INTERLACED 1024x768
with appreciable flicker, but if you set the root window's (and most
other windows') background to black, you might be able to tolerate it.
(Too bad that Thomas Roell's "clock.exe" can't detect the 44-MHz and
62-MHz crytals on the ProDesinger II, regardless of the setting of
switch 1--at lesat that's the case with mine.)

Glenn
glenn at cs.utexas.edu

-----Cut here-----

#
# Copyright 1990,91 by Thomas Roell, Dinkelscherben, Germany.
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of Thomas Roell not be used in
# advertising or publicity pertaining to distribution of the software without
# specific, written prior permission.  Thomas Roell makes no representations
# about the suitability of this software for any purpose.  It is provided
# "as is" without express or implied warranty.
#
# THOMAS ROELL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
# INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
# EVENT SHALL THOMAS ROELL BE LIABLE FOR ANY SPECIAL, INDIRECT OR
# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
# DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
# TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
# PERFORMANCE OF THIS SOFTWARE.
#
# Author:  Thomas Roell, roell at informatik.tu-muenchen.de
#
# $Header: /proj/X11/mit/server/ddx/at386/RCS/Xconfig,v 1.22 91/02/10 16:27:02 root Exp $
#

#
# define all devices to use
#
 Primary

#
# name        keymap
 Keyboard     # get the default-mapping that was estebished by ttymap(1) 

#
# name        device

#MouseSystems "/dev/tty00"
 Logitech     "/dev/tty00"
#Microsoft    "/dev/tty00"
#BusMouse     "/dev/mouse"

#
# just tell the server how big our display really is (in mm)
#
# Display 290 220      
Display 290 217 

#
# select some nice colors
#
 WhitePixel	"White"
 BlackPixel	"Black"
#Overscan	"#89e5e5" # works not with every hardware & resolution !!!

#
# we are also able to set here the default root visual type
# (StaticGray, GrayScale, StaticColor, PseudoColor, TrueColor, DirectColor)
#
 RootVisual	PseudoColor

#
# if you want to disable CTRL+ALT+BS uncomment the following
#
#DontZap

#
# some nice paths, to avoid conflicts with other X-servers
#
 RGBPath	"/usr/lib/X11/rgb"
 FontPath	"/usr/lib/X11/fonts/misc/,/usr/lib/X11/fonts/75dpi/,/usr/lib/X11/fonts/100dpi/"

##############################################################################
# now lets declare our VGA board
#
Graphics

# Paradise OEM16
# chip    ram   virtual   clocks                   default-mode  flags
#PVGA1A   512   864 606   25 28 36                 "640x480"

# Orchid ProDesigner+
# chip    ram   virtual   clocks                   default-mode  flags
#ET3000   512   864 606   25 26 36 30              "800x600"

# Orchid ProDesigner
# chip    ram   virtual   clocks                   default-mode  flags
#ET3000   512   864 606   25 28 35 45 65           "800x600"

# GENOA 5300/5400
# chip    ram   virtual   clocks                   default-mode  flags
#ET3000   512   864 606   25 28  0 45  0  0 39     "800x600"

# GENOA 6400
# chip    ram   virtual   clocks                   default-mode  flags
#GVGA     512   864 606   25 28 16 45 14 16 39 65  "800x600"

# TRICOM Mega/1024
# chip    ram   virtual   clocks                   default-mode  flags
# ET4000  1024  1152 900   25 28 62 36  0  0  0 45  "1024x768"

# Orchid ProDesigner II/1024
ET4000   1024   1152 900   25 28 40 36 "1024x768" # Orchid Prodesigner II

# STB PWR GRAPH
# chip    ram   virtual   clocks                   default-mode  flags
#ET4000  1024  1152 900   25 28 37 45 40 32  0 65  "1024x768"

# Sigma Legend with 1M
# chip    ram   virtual   clocks                   default-mode  flags
#ET4000  1024  1152 900   25 28  0 40 36 40 45 58
#			  32 36 31 35 50 48 33 65  "1024x768"    Legend

# Diamond Speedstar with 512K or 1M
# chip    ram   virtual   clocks                   default-mode  flags
#ET4000   512   840 624   25 28 32 36 40 45 50 62  "840x624"
#ET4000  1024  1152 900   25 28 32 36 40 45 50 62  "1024x768"

#
# Timings for build after standard VGA BIOS.
#
# name       clock  horzontal timing      vertical timing      flags
 "640x480"   25     640  672  768  800    480  490  492  525
#"800x600"   36     800  816  952 1056    600  608  610  633
#"800x600"   39     800  872  968 1104    600  600  606  624
#"1024x768i" 45    1024 1064 1224 1264    768  777  785  817   Interlace
#"1024x768"  62    1024 1096 1272 1328    768  776  778  808

##############################################################################
# And now some specials build by myself. No guarantee at all.
# Just try it, if you want.
#

#
# Timings for a NEC 3D and a Genoa 5300
#
# name       clock  horzontal timing      vertical timing      flags
#"736x540"   28     736  768  800  896    540  540  550  560
#"800x600"   39     800  864  896 1008    600  600  606  624

#
# Timings for a Nano Flexscan 9070s  and a TRICOM Mega
#
# name       clock  horzontal timing      vertical timing      flags
#"864x648"   45     864  912 1064 1080    648  648  668  672
#"920x690"   62     920  952 1088 1168    690  688  718  724
#"1024x768"  62    1024 1072 1200 1240    768  766  782  786
# "1024x768"  62    1024 1072 1176 1272    768  778  779  804
#"1152x900"  62    1152 1184 1288 1360    900  898  929  939   Interlace

# Orchid ProDesigner II and an NEC 4D
"1024x768"  40    1152 1224 1328 1360    900  898  929  939   Interlace

#
# Timings for a Orchid ProDesigner (brians at eecs.ee.pdx.edu)
#
# name       clock  horzontal timing      vertical timing      flags
#"800x600"   36     800  832  966  966    600 600 609 631

# Diamond SpeedStar and NEC 2a (gwr at world.std.com)
#"840x624"   36     840  884 1032 1056    624  624  626  648