AST 4 port card (WAS: FAS 2.08 problems...)

[John C. Archambeau]

rbt at tous.uucp (Robert B. Tate) writes:
>
> [ Stuff about my posted problem deleted ]
>
>I have 2, (old?) used, AST 4 port cards. (P/N 202013.)
>
>Board One is marked CC-832/AT (S/N 8558) with 1 8 position DIP SW
>Board two is marked CC-322 (S/N 21413), with 3 DIP SW's, (ASSY. REV. B)

My card is an old AST FourPort/DOS card.  The number stamped in the middle of
the card is CC-832.  The P/N is 202013.  I've had no problems using this card
under SCO Xenix 386 2.3.3 or ISC 2.0.2 other than the problem with using
IRQ 2 (9) with FAS 2.08.  I have the full documentation and manuals for my AST
board.  I'll e-mail you the pinout of the cable when time permits.

     // JCA

 /*
 **--------------------------------------------------------------------------*
 ** Flames  : /dev/null                     | What to buy?
 ** ARPANET : crash!pnet01!jca at nosc.mil     | EISA or MCA?
 ** INTERNET: jca at pnet01.cts.com            | When will the bus wars end?
 ** UUCP    : {nosc ucsd hplabs!hp-sdd}!crash!pnet01!jca
 **--------------------------------------------------------------------------*
 */