Asynch session hangs .. any suggestions?

[Larry Snyder]

We also run a Computone (Intelliport) and have found
that the 3.14 firmware and 4.28 drivers are the only
ones which work correctly in our installation.

We lock the modems at 19.2, and use only hardware
flow control.   Their is a single gettydefs entry
(no-rotating) for each port -

here is part of our ic_control file:

ttyi03:
buffers:
receive%=50
communications:
baud=19200
stopbits=1
bits=8
parity=none
handshake=busyready
addcr=no

-- 
   Larry Snyder, NSTAR Public Access Unix 219-289-0287 (HST/PEP/V.32/v.42bis)
                        regional UUCP mapping coordinator 
  {larry at nstar.rn.com, ..!uunet!nstar!larry, larry%nstar at iuvax.cs.indiana.edu}