Roell's server gives "Cannot establish any listening sockets"

[Thomas Roell]

Just read the docs that come with X386 (/usr/lib/X11/config/X386/Install):

...........


o  you MUST have installed the STREAMS facility before you can use X11

o  if you start X11 form the console - vt, there MUST be a free /dev/vt??

o  check up that you have specified "SHLIBMAX 8" in /etc/conf/cf.d/stune.
   (if not, this requires rebuilding the kernel)

o  if you use xdm, xrdb or imake, you MUST have a /lib/cpp installed.

o  imake may give you the warning "bad include syntax". This can be ignored.

o  VPIX will only run with a version of X11R4 that support TCP/IP.

o  you can only use 7bit chars with xterm when running not with TCP/IP.

..........

I think topic No.1 should fix your problem.

- Thomas
--
_______________________________________________________________________________
E-Mail (domain):	 roell at lan.informatik.tu-muenchen.de
UUCP (if above fails):   roell at tumult.{uucp | informatik.tu-muenchen.de}
famous last words: "diskspace - the final frontier..."