MFM/RLL Disk Driver for ISC or ESIX?

[Dale Gogates]

Followup-To: comp.unix.sysv386
Distribution: 
Organization: Interactive Systems Corp., Santa Monica, CA
Keywords: 

In article <16938 at darkstar.ucsc.edu> daniel at cis.ucsc.edu (Daniel Edelson) writes:
>In article <1991Jun11.121605.11455 at crash.cts.com>, jca at pnet01.cts.com (John C. Archambeau) writes:
>|> mdm at cocktrice.uucp writes:
>|> >Does anyone have a disk driver which would provide support for MFM/RLL drives
>|> >attached to a second controller? 
>|> 
>|> The driver should work as is ....
>
>The problem is that it's virtually impossible to find an MFM/RLL controller
>that can use a secondary IRQ. They all seem to be hardwired for 14 (or is it 15,)
>unlike the ESDI controllers which are often jumper selectable. One way around
>it is to mess with the second controllers edge connector, but this is kind of 
>messy. If anybody knows of an MFM/RLL controller that is jumper selectable to
>IRQ 15, would they care to post that information?

STB, Richardson TX has an MFM controller that lets you change the INT to
15.  I had to buy one last week, it also has 32K cache, mail order prices 
< $100.
They also have RLL and IDE controllers, but I have not first hand experience
with them.
--
---------------------------------------|-------------------------------------
Dale                                   | standard  disclaimers apply
 dalego at itx.isc.com       - internet   |
 73257,1510               - Compuserv  |