UUCP Failures in ISC

[Joel R. Berry]

Hello Netters,
    I am currently using ISC 2.2.1 on a 386 20 Mhz box.  I 
have trouble using uucp on my box.  I can get connected and
everything will go fine for a while, but about a minute into
the transmission, it will get hung up and start sending
alarms.  I am not sure what is causing it.  I have the fast
UARTS on my box but I can not compile the FAS because I
dont have a compiler :-(  I would like to hear from anyone who
has any ideas as to track down the problem.  My port is locked
at 19200, so I could be losing characters.  I will try that
next to see if I get any lessening of alarms.  There seems
to be no pattern.  I can send very large file with no problem, but
when I send many short files, it will hang.  Thanks for any help.
By the way, I am using USR V.32bis modems on both ends.  I have
also tried it with the slower v.32 modems with the same result.

Joel.

-----------------------------------------------------------
Joel Berry | berry at enuxha.eas.asu.edu
-----------------------------------------------------------