SCO rsh error message

[Bernt Marius Johnsen]

I do the following command on a VAX/VMS using TCP/IP software from
Wollongong:

> rsh durin -l chipsy (cd v12_dev; tar -xvf ../VHM.tar; rm ../VHM.tar) 

I get the following output from SCO 3.1.1:

> tar: blocksize = 20 
[... file list deleted ...]
> Bad Hertz Value 
> Using 100 from <sys/param.h> 
> Bad Hertz Value 
> Using 100 from <sys/param.h> 

Everything seems to be ok, but I don't like the "Bad Hertz Value"
message.  Does someone know why I get this message? The same rsh
command is completely ok when I change from our SCO computer (Compaq
386/20e) to a Sun386i.
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Bernt M. Johnsen,  Senior Systems Engineer
KVATRO AS, Pirsenteret, N-7005 Trondheim, NORWAY
E-mail: bernt at kvatro.no   /   Phone: +47 7 520090   /   Fax: +47 7 520140
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Bernt M. Johnsen,  Senior Systems Engineer
KVATRO AS, Pirsenteret, N-7005 Trondheim, NORWAY
E-mail: bernt at kvatro.no   /   Phone: +47 7 520090   /   Fax: +47 7 520140
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~