external SCSI cases/HD's

[ccocsnp Nick Pope IBM Technical Support]

From: cc100np at prism.gatech.EDU (Nick Pope)
Path: prism.gatech.EDU!cc100np
Newsgroups: 
Subject: 
Expires: 
References: 
Sender: 
Followup-To: 
Distribution: 
Organization: Georgia Institute of Technology
Keywords: 

From: cc100np at prism.gatech.EDU (Nick Pope)
Path: prism.gatech.EDU!cc100np
Newsgroups: ga.forsale,misc.forsale,misc.forsale.computers
Subject: 386/33 for sale
Expires: 
References: 
Sender: 
Followup-To: 
Distribution: usa
Organization: Georgia Institute of Technology
Keywords: 

I have a Micronics 386/33 MB with 64k cache, 4 megs of RAM in a mid tower
	case -- 3 HH 5.25" 3 HH 3.5" bays. 230W power supp. 
	2-serial 1-parallel and 1-game port.  Keyboard and logitech serial
	mouse.

	STB PowerGraph with Tseng ET4000 chipset (compat w/ Thomas Roells sever)

	Adaptec 1542B bus-mastering SCSI controller.

I'd like to sell the System as a whole, but if I sell the first Item, I'll
	piece off the last two.

Call me at (404)355-7694 or email cc100np at prism.gatech.edu


From: cc100np at prism.gatech.EDU (Nick Pope)
Path: prism.gatech.EDU!cc100np
Newsgroups: comp.unix.sysv386,comp.sys.next
Subject: ext HD's and cases - found a source.
Expires: 
References: 
Sender: 
Followup-To: 
Distribution: usa
Organization: Georgia Institute of Technology
Keywords: 

In the past few weeks, I've done a painstaking search for external SCSI drives
and cases.  I've finally found a place that sells both the HD's and CASES!
(with cabling)  So i figured I'd share it with the rest of you out there.

Gerisol Technology +1 800 447 8226

They sell external (empty) cases with connectors for SCSI drives. You can hook
these up to an adaptec in a 386, a NeXT or a sun. (anything with the Centronics
50-pin D connextor.)

Hope this helps someone.