ISC 2.2 Floppy tape driver with CMS JUMBO
Kent Karrerroot
root at shambala.uucp
Wed Mar 27 02:12:55 AEST 1991
In article <1991Mar24.112102.8264 at ibmpcug.co.uk> cboyes at ibmpcug.co.uk (Chris Boyes) writes:
>
>I have been trying to install a CMS JUMBO floppy tape system
>on a system running ISC UNIX 2.2, without success!
>The method of installation was as per OS Guide section 7.16
>1. Remove floppy disk driver
>2. Add New floppy driver
>3. Add Floppy tape driver
>4. Rebuild and reinstall kernel
>
>Normal UNIX floppy disk mounting and access was possible
>but use of the ftape command as below gives errors as below:
> #ftape -t /dev/ftape
> /dev/ftape : no such device (after timeout)
>then
> #ftape -t /dev/ftape
> /dev/ftape : device busy
>
>Following this any attempt to access the floppy disk results
>in a device busy message.
>
>
I had the same problem. I finally called CMS Technical Support. They asked
me to check the rev level of my tape drive. Apparently there is a known
problem with a particular rev level. I fixed the bug by purchasing CMS's
new unix driver.
I suggest you call their tech support number (number in back of documenta-
tion and talk to them.
--
[ A GREAT DEAL OF CHAOS IN THE WORLD occurs because people don't appreciate ]
[ themselves. -- Chogyam Trungpa ]
[ "SHAMBHALA - The Sacred Path of the Warrior" ]
[____________________uunet!seaeast.wa.com!shambala!root ____________________]
More information about the Comp.unix.sysv386
mailing list