UUCP through terminal server under ULTRIX

[David C. White]

In article <1488 at ndmath.UUCP> milo at ndmath.UUCP (Greg Corson) writes:
>On a DEC ultrix computer, either a DECstation (mips based) or
>VAX (CVAX based) is it possible to run UUCP both dial in and
>dial out through a serial port on a DEC terminal server?

I would like to hear an answer to this also.  The question was asked
once before here about problems with protocol based file transfers
through a terminal server, but I never saw or missed the response, if
any.  I have tried X/YMODEM with a direct connect line and UUCP
through both a modem and direct lines through a DECserver 200 with no
success.  I set the port exactly as described in the manual, but no
luck.  I sure would like to know how this is supposed to be done.  It
apparently works under VMS, so I am wondering if it has something to do
with the how the port is set under Ultrix.
-- 
David White	Grass Valley Group, Inc.   VOICE: +1 916.478.3052
P.O. Box 1114  	Grass Valley, CA  95945    FAX: +1 916.478.3778
Internet: davew at gvgpsa.gvg.tek.com     UUCP:  ...!tektronix!gvgpsa!davew