X.25 support for ULTRIX (VAX or MIPS)

[George Robbins]

In article <1489 at ndmath.UUCP> milo at ndmath.UUCP (Greg Corson) writes:
> Is anyone aware of an X.25 communications package that can
> be used under Ultrix on either a DECstation (mips) or 
> microvax running Ultrix?
> 
> I would be particularly interested in something that can
> run in DECstation or the MicroVax 3000 desktop box (the one
> that looks like a VaxStation 3000).  Probably the biggest
> problem here would be what to use for an interface.

Unless I misread the little grey wall, DEC seems to have settled on
only doing Ultrix X.25 thru the Micom PAD while the DEC X.25 hardware/
networking products are only supported under VMS.

You might take a look at some of the ethernet terminal servers that
support X.25 access modules.  This seems like it might be the best
way to go, especially if you want to provide X.25 access to a group
of machines.

I'd be interseted in hearing from anybody who's actually used one
of these, especially for supporting binary-transparent connections.

-- 
George Robbins - now working for,	uucp: {uunet|pyramid|rutgers}!cbmvax!grr
but no way officially representing	arpa: cbmvax!grr at uunet.uu.net
Commodore, Engineering Department	fone: 215-431-9255 (only by moonlite)