SCSI or MT driver for 8mm broken under 4.1Beta but works fine with 4.0

[Farhad Shakeri]

Hi,

I about to send an SPR but I was wondering if anybody has seen this 
particular problem with 8mm drives on DS3100s and DS5000s?

under Ultrix 3.1*  on 3100s and 5400 we could not use the 8mm drive
because of mt program acted very strange.  it hung the drive or
mt fsf  unloaded and many strange thing.  But all these problems
were fixed  under Ultrix 4.0 and it works perfectly  on  DS3100s
and DS5000s  (have not  tried it on 5400 but we think it will work)

We have another DS5000 (2D graphic)  running Ultrix 4.1Beta 
and again all the problems with MT is back and it is worth.

Has anybody seen this problem.

I do not have real Ultrix 4.1  yet so I do not know if this
was a Beta problem or not.

Thanks alot.

-- 
       +-------------------------------------------------+
      /   Farhad Shakeri       E-Mail:                  /
     /  Stanford University    farhad at CS.Stanford.EDU  /
    / Computer Science Dept.                          /
   +-------------------------------------------------+