Problem getting LAT printers to work on Ultrix V4.0
mcanally at swift.cs.tcd.ie
mcanally at swift.cs.tcd.ie
Fri Oct 5 20:53:02 AEST 1990
In article <7113.26fc941d at swift.cs.tcd.ie>, michael at swift.cs.tcd.ie writes:
> We are having problems getting printers going using ports on a DECSERVER-200
> under Ultrix version 4.0, even though these seem to work on Ultrix 3.0 and on
> VMS 5.2.
>
> We think we have followed the instructions in the manual.
>
> Has anybody got LAT printers going under Ultrix 4.0 and did they have to do
> anything special ?
Thanks to all who responded to the newsgroup or directly be e-mail.
Having followed the instructions in the manual, the one extra thing that needed
to be done, was to check that daemon had access to the tty file used in /dev
(e.g. /dev/tty03) to make the connection to the decserver. In /etc/rc.local
we have an entry /etc/lcp -s -h /dev/tty03 and in /etc/printcap there must be
an entry for the name of the decserver and the name of the port on the
decserver that is used. e.g. :ts=DSB: :op=PORT_2:
After /etc/printcap has been modified, the printer daemon lpd has to be killed
and restarted.
Thanks to all who helped sort out the problem.
--
,
Maire Mc Anally | eMail: mcanally at cs.tcd.ie
Department of Computer Science, |
Trinity College, | voice: +353-1-772941 ext 1695
Dublin 2, Ireland | FAX: +353-1-772204
More information about the Comp.unix.ultrix
mailing list