Problem with networking kernel

[john at bradley.UUCP]

I am having problems getting a MTXINU 4.3 networking kernel working completely
on a VAX 11/750 with a DELUA.  I am using the patched DEUNA driver for the 
DELUA.

It seems that the VAX can receive packets but it can't transmit packets.
I am able to do a ruptime/rwho and see the other machines on the net.
When other machines ftp/telnet to the VAX, the ftp/telnet fails on the 
open command with "ftp:connect: Connection timed out".  When I do a netstat 
while another machine is trying to connect, I get:

Active Internet connections
Proto Recv-Q Send-Q  Local Address          Foreign Address        (state)
tcp        0      0  bradley.ftp            bueris.1029            SYN_RCVD
tcp        0      0  bradley.ingreslo       *.*                    LISTEN

Ping doesn't work from the VAX to any of the hosts.  There are no entries
in the arp table.  Also note, that all the other machines on the net are
running 4.2 TCP/IP based code.

The only error messages that I get are from ifconfig.
After the initial ifconfig in rc.local, I always get the following error
message.

ifconfig de0:	(note broadcast is set to 0, because other machines are using
		 4.2 based code, same for NOTRAILERS )

	de0: flags=63<UP,BROADCAST,NOTRAILERS,RUNNING>
		inet 192.12.128.23 netmask ffffff00 broadcast 192.12.128.0
	ifconfig: socket: Protocol not supported
	^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

ifconfig lo0:

	lo0: flags=9<UP,LOOPBACK>
		inet 127.0.0.1 netmask ff000000 
	ifconfig: socket: Protocol not supported
	^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

I have had the DELUA board swapped with another and everything still doesn't
work...

Any ideas?
----------------------------------------------------------------------------
John Lengeling			UUCP: {cepu,ihnp4,uiucdcs,noao}!bradley!john
Bradley University		ARPA: cepu!bradley!john at seas.ucla.edu
Text Processing 		ATTMAIL: attmail!bradley!john
Bradley Hall Room 6F            PHONE: (309) 677-2230
Peoria, IL 61625