Help-Bus Errors

[Aryeh M. Weiss]

In article <1810 at lzga.ATT.COM> bogatko at lzga.ATT.COM (George Bogatko) writes:
>Help.  We have a program that we do not have source for that is dumping
>core with Bus Error.  Does anybody have, or can point me to, a list of
>what causes the major core dumps,  I.E. Bus, EMT, Memory Fault, etc.

A program dumps core when it receives a signal that is not currently being
caught or ignored and causes a core dump.  (Signals that cause core dumps
are (SIG) QUIT, ILL, TRAP, IOT, EMT, FPE, BUS, SEGV, and SYS.)  Any of
these signals can be sent to a process via kill(2S).  SIGQUIT is usually
caused by the quit key (^\).  SIGILL by execution of an illegal instruction
(this may be indicative of a trashed stack causing a procedure to return to
a random location in the code).  SIGTRAP, IOT, and EMT are caused by
executing special processor machine instructions.  The names are throwbacks
to the pdp-11 days and are named after instructions in the pdp-11
instruction set.  These are obviously machine dependent, but seem to have
equivalents on various popular hardware platforms (Vaxes, 68000, 80x86).
Trap instructions are used by debuggers to set breakpoints in the code of a
process being traced, but I don't know how they interact with SIGTRAP when
being used for this purpose.  SIGFPE are caused by floating point errors,
such as divide by 0, overflow, and (on Intel x86/x87 system) FPU stack
overflows (Xenix 386 users may be familiar with this last one).

Now the tricky ones: SIGSEGV is caused when a process addresses a location
outside of its (code or data) address space.  This is typically caused by
overrunning an array, incrementing (and dereferencing) a pointer beyond the
end of process memory, and, most familiar to all programmers of non-Vax
Unix systems, dereferencing the dreaded NULL pointer.  SIGBUS errors are
quite machine dependent, but in my experience can be caused by two
circumstances: (1) reference to an impossible machine address (this would
occur on 68000 systems if you went beyond address 2^24 and may occur on
386/286 systems if you load a segment register with an absurd segment
number) and (2) reference an odd address with a word oriented instruction
(this is a no-no on Vaxes and 68000's, but 80x86 systems don't mind).
SIGSYS is for bad arguments to a system call, but this has never happened
to me and I do not know how bad the argument has to be.  Illegal addresses
passed to system calls generally get returned to the calling process with
an error code, so I don't know how exactly to get one of those (this may be
another throwback to the olden days of yore).

>Please, no flames.

This question certainly comes under the heading of things your mother
(and the manuals) never told you.


--