UDA50 on VAX 11/730

[Michael Enkelis]

I am trying to configure a UDA-50 + RA80 disk drive into my
VAX 11/730 system.  Everything seems ok on boot up,
but within 24 hours i get the following messages and the system is hung.

Feb 23 10:18
uda0: soft error, SDI error, unit 0, event 053, hdr 0x0
	0x13	0x4	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0
uda0: soft error, SDI error, unit 0, event 0113, hdr 0x0
	0x13	0x4	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0
uda0: soft error, SDI error, unit 0, event 0113, hdr 0x0
	0x13	0x4	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0
uda0: hard error
uda0: hard error, SDI error, unit 0, event 0113, hdr 0x0
	0x13	0x4	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0
uda0: soft error, SDI error, unit 0, event 0113, hdr 0x0
	0x13	0x4	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0
uda0: soft error, SDI error, unit 0, event 0113, hdr 0x0
	0x13	0x4	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0
uda0: hard error
uda0: hard error, SDI error, unit 0, event 0113, hdr 0x0
	0x13	0x4	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0	0x0
ra0c: hard error sn64 OFFLINE



My system consistes of:

4.3 BSD UNIX #5: Fri Feb 16 23:27:28 PST 1990
    root at enky:/sys/VAX730
real mem  = 4194304
avail mem = 3389440
using 153 buffers containing 314368 bytes of memory
mcr0 at tr0
uba0 at tr3
idc0 at uba0 csr 175606 vec 250, ipl 15
rb0 at idc0 slave 0
rb1 at idc0 slave 1
uda0 at uba0 csr 172150 vec 774, ipl 15		<<-- in exp box.
ra0 at uda0 slave 0
zs0 at uba0 csr 17250 vec 224, ipl 15			<<-- in exp box.
ts0 at zs0 slave 0
dmf0: printer synch asynch.
dmf0 at uba0 csr 160340 vec 734, ipl 15
vp reset vec from 200 to 174			<<-- in exp box.
vp0 at uba0 csr 177510 vec 174, ipl 14

Any ideas on jumper setting on UDA? or card placement in exp box.


-- 
 _ _ _                          __
' ) ) )      /          /)     /  `       /      /)	Michael Enkelis
 / / / o _. /_  __. _  //     /--   __   /_  _  // o _ 	tektronix!vice!michaele
/ ' (_(_(__/ /_(_(_(<_(/_    (___, /) )_/ <_(<_(/_(_/_)_    (503) 627-4099