Utility to print terminal memory.

[Bill Vermillion]

In article <1991May30.083643.25468 at thunder.mcrcim.mcgill.edu> mouse at thunder.mcrcim.mcgill.edu (der Mouse) writes:

>In article <15710006 at hpdmd48.boi.hp.com>, markw at hpdmd48.boi.hp.com (Mark Wolfe) writes:

>> Well, I have my answer, and I was very surprised at the responses I
>> got.  Most of the "wizards" said this was impossible to do in most
>> cases and difficult at best.  I guess terminals with their own memory
>> are rare outside HP (hah!).
 
>No, terminals with their own memory are not rare; every terminal must
>have somewhere to store the stuff displayed on the screen, and most use
>ordinary RAM for this.
 
>What *is* comparatively rare is terminals that provide any way for the
>computer on the other end of the serial line to get at this data.  And
>of those that do, the required actions vary widely.

Just saw a new terminal last week that is nearly in release.  It's the MC6
from Link.

It is the first terminal I have seen that knows what to do (to a limited
extent) with the memory it has in it (64k ram I seem to recall).

One of it's "neat" features is a cut&paste mode.

You can cut&paste in the same window, or between two different windows
(split screen that connects to different hosts simultaneously).

To cut you press a key sequence, highlight the material, press another key.
To paste you go to the position you wish to paste and press a key.
The ram is dumped to screen and to the host.  With one of these and short
command sequence or pipe to lp, a screen dump should be easy.   Whole
sequence could be programmed to a function key - which if I remember
correctly takes up to at least 64 bytes per key..

I will probably be getting one of these for testing and evaluation later
this summer.

Disclaimer - I am not an employee or related to Link in any way.  I was
just blown away by the capabilities of this terminal on my initial exposure
to it.  And it was being demoed for me by the person who wrote the
programming for it - so he knew all the tricks - and showed me a few he
hadn't announced.


P.S. - I just cross-posted this to comp.terminals so edit your followups
appropriately - particularly for non-wizard answer/question.

-- 
Bill Vermillion - UUCP: ...!tarpit!bilver!bill
                      : bill at bilver.UUCP