IRQ 2 with WD8003
Bill Vermillion
bill at bilver.uucp
Sun Dec 9 04:12:00 AEST 1990
In article <TF2L3KD at geminix.in-berlin.de> gemini at geminix.in-berlin.de (Uwe Doering) writes:
>horke at buchonia.rhoen.in-berlin.de (Bernhard Kroenung) writes:
>
>>My system is an 386 with 387 at 25Mhz 8Mb (Chicony Board) and Xenix 2.3.3
....
>>I wanted to add an WD8003 with IRQ 2 and Base-Adress 0x280 or 0x300 or
>I tried to use the WD8003 card on IRQ2, too, but under 386/ix this
IRQ2 is cascaded to IRQ9 on the AT bus. You can't get to IRQ2. That
explains your problem.
--
Bill Vermillion - UUCP: uunet!tarpit!bilver!bill
: bill at bilver.UUCP
More information about the Comp.unix.xenix.sco
mailing list