Remote printing from a DOS machine to Xenix's LP system
John Poplett
john at cstreet.com
Mon Nov 19 19:12:29 AEST 1990
A few weeks ago I posted a query concerning the possibility of
sending print jobs from a DOS machine to a Xenix system across
a serial line in some kind of transparent manner.
After an overwhelming response, I decided to put together my
own solution.
I modified a DOS "PRN" driver that to shoot print jobs out the serial
port to the Xenix system. It honors Xon/Xoff and, most importantly,
sends an ASCII EOT at the end of each transmission (appropriately
enough) to the Xenix box.
A simple shell script on the Xenix side sits on a given serial
line and redirects each incoming file to the LP system.
It has seen limited testing here; it behaves just as though
the DOS machine was directly attached to the destination printer.
If anyone wishes a copy of the code, let me know.
John
--
John Poplett @ C Street Software | A woman who doesn't change
312 Wolff St. Oxnard, Ca. 93033 USA | her mind, doesn't have one.
(805) 486-7807 / john at cstreet.com | ~ Mae West
More information about the Comp.unix.xenix.sco
mailing list