SCO UNIX/ODT - Adaptec 154X[ab] as secondary controller
Michael Squires
mikes at iuvax.cs.indiana.edu
Thu Oct 18 16:53:41 AEST 1990
Problem solved. The Adaptec is set up as if it were to be the primary
controller (IO at 330, IRQ 11, DMA 5) but the BIOS is disabled. I
suggest that the setup be tested first with the BIOS and floppy enabled
(if 1542[ab]) and the primary controller removed so that the on-board
utility can be used.
If there is no entry for a HD at ID 0, controller 0, LUN 0 the kernel fails
to build; apparently a physical hard drive is not required.
--
Mike Squires (mikes at iuvax.cs.indiana.edu) 812 855 3974 (w) 812 333 6564 (h)
mikes at iuvax.cs.indiana.edu 546 N Park Ridge Rd., Bloomington, IN 47408
Under construction: mikes at sir-alan@cica.indiana.edu
More information about the Comp.unix.xenix.sco
mailing list