Telebit TrailBlazer-Plus

[Phil Eschallier]

In article <4137 at turnkey.TCC.COM>, sandy at turnkey.TCC.COM (Sanford 'Sandy' Zelkovitz) writes:
>  
> One other question, I have noticed that SCO set register S51 to 254; however,
> my manual reflects that the only allowable settings are 0-5 and 255. I
> changed register S51 to 254 and did notice a difference. Basically, since
> this must be an undocumented setting, what does it do?
>  
	S51 = 254 cause the incoming calls to default to 19200 baud (between
	the modem and serial card) instead of 9600 (when S51=255).


	phil eschallier