Serial I/O Drivers for SCO

[Phil Eschallier]

hello out there ...

i am using a 12mhz 80286 for a lot of mail and news transfer.  the problem
is this ... at any baud rate, the thru-put of outbound data is always much
high than the thru-put for inbound data -- this is at any baud rate from
1200 thru telebit PEP (19200 or 9600).

with the telebit at 19200 baud, i get outbound rates as high as 1875 but
inbound rates suck -- about 600+ chars/sec.

i am using a standard ibm com port and would like better thru-put for
incoming data.  my feeling is that the problem is in the device driver
but i do not know much about such things -- can anyone help??  has anyone
written a new device drive (either pd or commercial)??

btw -- a smart i/o board is not a possibility at the time -- due to lack
       of $$$$$$.

thanx for any help ...

-- 
Phil Eschallier                                        | Lagniappe Systems
(Preferred E-mail): { root | phile }@LS.COM            | 1011 New Hope St. #87c
                or: ...!rutgers!lgnp1!{ root | phile } | Norristown, PA  19401
       (alternate): phile at PRA.COM                      | (215) 279-1114 (8a-1p)