tar question ...
Conor P. Cahill
cpcahil at virtech.UUCP
Thu Aug 31 09:15:46 AEST 1989
In article <6340004 at hpcupt1.HP.COM>, stratton at hpcupt1.HP.COM (Jim Stratton) writes:
> In order to make my backups smaller in
> size, I compress the tar image using something like this:
> tar cf - [files] | compress -c >/tmp/xxx
> cd /tmp; tar c xxx; rm xxx
> As an alternative to tar, I've tried piping compress to dd but always get
> an error writing to the output device.
The dd error is probably (and i am really guessing since you didn't display
the command you used) caused by the fact that the output from compress is not
in a nice blocked format that your output device (maybee a tape?) wants.
Under 386/ix I routinely backup 120Meg filesystems to my 60 Meg tape backup
using the following command:
find . -print | cpio -oBc | compress | dd of=/dev/rmt0 obs=2048k
I know this isn't tar, but substituting tar for the find|cpio should
work without any problem. The obs=2048k give me a 2Meg output buffer
for the tape, so it streams along when it is writing. If you do
not have that much memory you might want to reduce it to 50-100 K.
--
+-----------------------------------------------------------------------+
| Conor P. Cahill uunet!virtech!cpcahil 703-430-9247 !
| Virtual Technologies Inc., P. O. Box 876, Sterling, VA 22170 |
+-----------------------------------------------------------------------+
More information about the Comp.unix.xenix
mailing list