SCSI and AT bus support?
neese at adaptex.UUCP
neese at adaptex.UUCP
Tue Dec 19 09:25:00 AEST 1989
> A group here has an interesting problem. They have some hardware which
>requires a SCSI interface. They have to control it with a 386 box
>running an AT type controller. Because the AT type controller is built
>into the system replacing it is not an option.
>
> We are looking for a good solution to the problem. The one we would
>like is to get a SCSI driver which runs with standard Xenix. The
>alternative is either adding an AT driver to the GT version, or ignoring
>the AT controller and supplied ESDI drive to use a SCSI drive off the
>controller we have to include anyway.
>
> Obviously scrapping something we have to buy is not a really good cost
>move, so we want to keep the ESDI drive and just run our magic
>peripherals off the SCSI controller.
>
> I would like to hear from anyone who has done this, or anything like
>it. We can not qualify other hardware for the system and still meet
>delivery schedules, and I can't give much more in the way of details
>about just WHAT we are going to do with this setup. It's not military,
>just proprietary for now.
Bill, I think I understand what you are saying, so here goes. The SCSI
adapter can coexist with the AT ESDI controller with SCO 2.3GT. The SCSI
devices become the slave devices and you must boot off the ESDI drive.
But other than that, it sounds like this will solve your problem, that is
if I understand you correctly.
Roy Neese
Adaptec Central Field Applications Engineer
UUCP @ {texbell,attctc}!cpe!adaptex!neese
merch!adaptex!neese
uunet!swbatl!texbell!merch!adaptex!neese
More information about the Comp.unix.xenix
mailing list