Need Info on a 33MHZ PC to run Xenix 386
VIC_F_DUGURAN at cup.portal.com
VIC_F_DUGURAN at cup.portal.com
Wed May 31 14:33:19 AEST 1989
Hello!, We need some info on what harware will support the following specs,
or if anybody can point us to a vendor/s that can provide them, please
email the reply, thanks!.
A: Hardware(Basic):
1. "PC", Intel 80386 CHIP Based, 33 MHz, "TOWER"
Configuration, with the following specs:
a. 8 MB (60 ns) Memory, Exp. to 16 MB.
b. 8.0 MIPS Minimum.
c. Dual Bus Architecture w/64 Bit
Internal Cache Bus, with 128 KB (25ns)
Static RAM.
d. Shadow RAM Cache Memory.
e. 1.44 MB FLoppy (3-1/2").
f. 1.2 MB Floppy (5-1/4").
g. Minimum of 1 Serial and 1 Parallel Port.
h. High (800x600) Res. Mono Monitor w/ VGA.
i. 150 MB HD w/Second HD Capability(Full).
32 KB Disk Cache. 1.875 KB/Sec Xfer Rate.
20 ms Min. Access time and 1:1 inter-
leaving with full track buffering.
j. Intel 32 Bit 80387 Coprocessor Support
with 33 MHZ System Clock.
B. Hardware(Networking):
1. Intelligent Networking Hardware to support SCO
Xenix 386 OS Multiuser Environment.
a. 16 Bit Controller w/8 Mhz Processor and
64K RAM Offloading I/O processing from
main processor w/4 terminal concentrator
ports.
b. 2 Terminal Concentrators w/16 RS232 port
capability and 6 MHz processor, attachable
to controller card concentrator ports.
c. Thin twisted pair wire connection from
terminal concentrator to ascii terminals
and PCs.
C. Hardware(Satellite), (Quantity of 8 Units):
1. ASCII Terminals Complete with all necessary hardware
to connect to basic Network "B" above.
a. 78 Hz Refresh Rate.
b. 110 Vac.
c. 2 serial ports, 1 parallel port.
vic_f_duguran at cup.portal.com
Saipan Computer Services
Caller Box PPP 1011
Saipan, MP 96950
FAX: (670) 234-9119
More information about the Comp.unix.xenix
mailing list