uucico for TB+ modem
Kevin Davies
kevin at iisat.UUCP
Tue May 16 11:58:14 AEST 1989
In article <48 at wells.UUCP>, edw at wells.UUCP (Ed Wells) writes:
> RE: SCO Xenix, Rev. 2.2.x Telebit modem problem at 19,200 baud.
>
is that '286 or '386 version of Xenix ??
> Has anyone else found a fix to get to 19200? The fix would have
> to be for the "/usr/lib/uucp/uucico" program.
>
I'm using Tandy Xenix/286 which is close to SCO Xenix 2.1-2.2 on the '286.
For dialouts, the uucico program opens the proper port, then executes
an external program called /usr/lib/uucp/dial which actually does the
dialing and setting of the port (parameter & baud rates). So I modified
the dial progam (yes, source was included) to recognize the string
'19200' as a baud rate and to set the port to EXTA (which is 19200).
The telebit now dials out at 19200 or 9600 etc. and works perfectly.
(Actually, I was even allowed to add 19200P, since this argument is
passed as a string, and the dial program will set the Telebit in
PEP mode).
--
Kevin Davies International Information Service (IIS)
UUCP: {uunet,utai,watmath}!dalcs!iisat!kevin
Bitnet/Uucp: kevin at iisat.uucp Arpanet: kevin%iisat.uucp at uunet.uu.net
More information about the Comp.unix.xenix
mailing list