More SCO Xenix VP/ix problems
Andrew Phillips 289 8712
andrew at teslab.lab.OZ
Tue Nov 28 17:57:40 AEST 1989
We just got VP/ix version 1.1.0 and have had a few problems running
it on Xenix 2.3.1.
First, here is my vpix.cnf file:
C /usr/vpix/defaults/C:
ROM /usr/vpix/defaults/rom
CMOS /usr/vpix/defaults/cmos
BOOTIMAGE $HOME/vpix/vpix.img
EGAROM /usr/vpix/defaults/romvga
A /dev/rfd096
B /dev/rfd1135ds18
D /dev/hd00
E $HOME/vpix/E:
MOUSE /dev/mouse/vpix0
My major problem is that I can't access the MSDOS partition on the
hard disk (as drive D). After trying a few things I realised
something that I hadn't know before - I can't access the SCSI drive
if I boot up with vanilla IBM PC-DOS, I have to use MSDOS supplied by
Apricot (MS-DOS 3.3) which presumably has special hooks for the SCSI
hard drive. If I try to boot VP/ix with Apricot's version of MS-DOS
I get "General protection fault - cannot emulate instruction". Would
Update A allow me to run this version of MSDOS?
If I boot with the MS-DOS 3.2 that comes with VP/ix and do a chkdsk
of drive D I get a "probable non-DOS disk" message. I haven't tried
formating drive D because "DIR D:" gives all sorts of names which
look like some things on the Xenix partition and the drive is OK
under MS-DOS 3.3.
I also get several messages when starting up VP/ix, which I can't
explain because I can find no reference to these error numbers in the
manual:
"Error 13 opening mouse file /dev/mouse/vpix0".
"Error 16 encountered opening file /dev/rfd1135ds18 as drive B"
>From my experiments it seems that you can't have more than one real
floppy disk accessible from VP/ix? i.e. A: or B: but not both.
Also when I try to go to the pseudo hard drive (E:) I get "Invalid
drive specification". Is it that only drives C and D can be pseudo
hard disk drives?
Thanks in advance. Andrew.
--
Andrew Phillips (andrew at teslab.lab.oz{.au}) Ph. +61 (Aust) 2 (Sydney) 289 8712
More information about the Comp.unix.xenix
mailing list