using mouse with sSCO Xen

[MARK LEVY]

mP>From: mike at bbm.UUCP (Mike Doucette)
mP>Subj: using mouse with sSCO Xenix
mP>Orga: BBM Bureau of Measurement, Toronto


mP>        Does anyone out there in netland know how to get a
mP>        mouse to work with xenix.

mP>        I have an ATI VGA Wondercard that has a bus mouse port
mP>        that emulates a microsoft bus mouse. I have installed it
mP>        in dos and it works, but when I try to use it with
mP>        the usemouse command I get the error message:
mP>        "d_open: can't attatch /dev/mouse/bus0 to event que, errno 22"
mP>        "ev_open: error attatching device"
mP>        "usemose: cannot open event que(22)"

mP>        On boot up my system shows a mouse installed.  I have used
mP>        IRQ 2 and have configured it to memory location 023cH as
mP>        per the manufactures specs.

   Don't use IRQ2 on an AT style computer!  IRQ2 is reserved for 
cascading the higher IRQs available on ATs.

Mark
---
 ~ DeLuxe 1.11a18 #3019
 ~ QNet 2.04a:NorthAmeriNet: Sound Advice BBS ~ Gladstone ~ MO