Computone board for dial in/out modem - anybody make it work
Stuart Lynne
sl at van-bc.UUCP
Wed Jan 10 18:10:13 AEST 1990
In article <278 at boake2.UUCP> scott at boake2.UUCP (Scott Boake) writes:
>Has anybody been able to make a Computone board work for dial in/out under
>SCO Xenix or SCO UNIX? I've tried and can get it to work one way or the
>other but not both.
>
>Has anybody be able to make ANY intelligent I/O card work both ways ?
>
I have it working (Computone 4 port Intelliport board). But I'm not exactly
thrilled with it. Occasionally the port will hang after dialing out. So I
limit my dialing.
It's not that big a problem. Perhaps once a week, dialing out from one modem
about once per hour. But it shouldn't hang at all. It's also not a reboot
problem. Just have to kill the getty and it start's up ok. If it was any
worse I'd right a script to check and kill as required.
Anyhow the ic_control file I use is:
ttyi00:
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# Cpu-to-cpu -- receive priority
# This entry is used for high-speed computer-to-computer connections.
# All of the IntelliFeatures are disabled for highest throughput.
# Buffer assignment is skewed toward receive.
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
buffers: receive% = 80
ttyi01:
=ttyi00
ttyi02:
=ttyi00
ttyi03:
=ttyi00
System's file entry
xxxxx Any ACU 19200 XXX-XXXXU "" in xxxx word xxxx
Device file entry
ACU ttyi01 - 19200 /usr/lib/uucp/dialTBIT
ttys file
19ttym01
ls -l /dev/ttyi01 /dev/ttym01
crw-rw-rw- 1 root root 63, 1 Jan 9 23:07 /dev/ttyi01
crw--w--w- 1 uucp uucp 63,129 Jan 9 20:01 /dev/ttym01
--
Stuart.Lynne at wimsey.bc.ca ubc-cs!van-bc!sl 604-937-7532(voice) 604-939-4768(fax)
More information about the Comp.unix.xenix
mailing list