dBase III on the AT&T 3b1
Richard Kuhns
rjk at mrstve.UUCP
Thu May 22 01:17:35 AEST 1986
I'm having a (rather severe) problem with dBase III on the 3b1, and
I would greatly appreciate any help/hints/suggestions (other than
scrapping dBase III, which we intend to do in the future anyhow).
We have a large application which was originally written in dBase II.
Thru the use of a lex script I wrote, and a little hand editting, I
managed to get it running under dBase III. HOWEVER, one of the tricks
it depends on is being able to send data straight to a printer attached
to the terminal. This doesn't sound too bad -- just send the correct
escape sequence to the terminal, right? Wrong. Whenever I try to
send an ESC to the terminal, all I get is `?', as follows:
.
. ? chr(27)
?
.
Using chr() with printable characters works just fine. Also, sending
the escape sequences from a C program works, so I assume I have the
terminal and printer connected correctly. I've also tried
. store chr(27) to esc_char
and then printing esc_char, but I get the same results. Can anyone help?
We need to get this application running as soon as possible. I'm going
to re-write it in C using Informix (tm) as the DBM, but that will take
a little while.
If anyone is interested in `watch-fors' for dBase III on the 3b1, drop
me a note. I've got a million of 'em...
TIA
--
Rich Kuhns {ihnp4, decvax, etc...}!pur-ee!pur-phy!mrstve!rjk
More information about the Comp.unix
mailing list