PD Terminfo/Curses (part 10 of 11)
sources at genrad.UUCP
sources at genrad.UUCP
Sat Dec 22 00:15:26 AEST 1984
This is part of a distribution of a public domain version of terminfo/curses
It is a rather large distribution, so I have broken it up into 11 modules
(each less than 64K long.) Each shar format module should end with the line
"exit". This code is completely public domain, originally written by Pavel
Curtis of Cornell University. This version has some small improvements and
bug fixes.
This unit contains:
the last of the terminal data files
Part 11 will be
a demo program that uses the new curses
----------------- cut here ----------------
: Run this shell script with "sh" not "csh"
PATH=:/bin:/usr/bin:/usr/ucb
export PATH
if test ! -d =data
then
echo 'Making directory "=data"'
mkdir =data
fi
echo 'x - =data/Makefile'
sed 's/^X//' <<'//go.sysin dd *' >=data/Makefile
PARTS= header adds annarbor beehive cdc concept datamedia dec diablo general \
hazeltine heath homebrew hp ibm lsi microterm misc perkinelmer \
print special tektronix teleray teletype televideo ti visual trailer
compiled: source
time compile source
source: ${PARTS}
cat ${PARTS} > source
-rm -f /etc/terminfo
ln source /etc/terminfo
clean:
rm -r ? source
changes:
vi ${PARTS}
//go.sysin dd *
echo 'x - =data/adds'
sed 's/^X//' <<'//go.sysin dd *' >=data/adds
# # --------------------------------
# @(#)adds 1.3 3/22/82
#
# adds: ADDS
#
# Regent: lowest common denominator, works on all regents.
regent|adds regent series,
cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, clear=^L,
cup=^K%p1%' '%+%c^P%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
cols#80, home=^A, lines#24, ll=^A^Z, cuf1=^F, cuu1=^Z,
# Regent 100 has a bug where if computer sends escape when user is holding
# down shift key it gets confused, so we avoid escape.
regent100|adds regent 100,
cup=^K%p1%' '%+%c^P%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
kf1=^B1\r, kf2=^B2\r, kf3=^B3\r, kf4=^B4\r,
kf5=^B5\r, kf6=^B6\r, kf7=^B7\r, kf8=^B8\r,
khome=^A, kcub1=^U, kcuf1=^F, kcuu1=^Z, kcud1=^J, use=regent,
# Regent 20, untested
regent20|adds regent 20,
ed=\Ek, el=\EK, cup=\EY%p1%' '%+%c%p2%' '%+%c, use=regent,
regent25|adds regent 25,
kf0=^B0\r, kf1=^B1\r, kf2=^B2\r, kf3=^B3\r, kf4=^B4\r,
kf5=^B5\r, kf6=^B6\r, kf7=^B7\r, kf8=^B8\r, kf9=^B9\r,
khome=^A, kcub1=^U, kcuf1=^F, kcuu1=^Z, kcud1=^J, use=regent20,
# Regent 40: untested
regent40|adds regent 40,
il1=\EM, dl1=\El, is2=\EB, rmso=\E0@, smso=\E0P,
rmul=\E0@, smul=\E0`, flash=\ED\Ed, use=regent25,
# If you have standout problem with regent 200, try smso=\ER\EOP,rmso=\E0@\EV,
regent60|regent200|adds Regent 60,
dch1=\EE, rmir=\EF, smir=\EF, is2=\EV\EB, use=regent40,
regent60na|regent 60 w/no arrow keys,
kcub1@, kcuf1@, kcuu1@, kcud1@, use=regent60,
# Note: if return acts weird on a980, check internal switch #2
# on the top chip on the CONTROL pad board.
a980|adds consul 980,
cr=^M, cud1=^J, ind=^J, bel=^G, il1=\E^N$<13>, am, cub1=^H,
clear=^L$<1>^K@, cup=^K%p1%'@'%+%c\E^E%p1%2d, cols#80, dl1=\E^O$<13>,
kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4,
kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9,
lines#24, cuf1=\E^E01, smso=^Y^^^N, rmso=^O, cuu1=$<9>,
# From Onyx:edward Thu Jul 9 09:27:33 1981
viewpoint|addsviewpoint|adds viewpoint,
cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, lines#24, cols#80,
cup=\EY%p1%' '%+%c%p2%' '%+%c, ed=\Ek, el=\EK, cuf1=^F,
cuu1=^Z, clear=^L, ll=^A, kcub1=^U, kcuf1=^F, kcud1=^J, kcuu1=^Z, khome=^A,
smso=^N, rmso=^O, smul=^N, rmul=^O, is2=^O\E0`, cvvis=^O\E0P, cnorm=^O\E0`,
//go.sysin dd *
echo 'x - =data/annarbor'
sed 's/^X//' <<'//go.sysin dd *' >=data/annarbor
# # --------------------------------
# @(#)annarbor 1.8 5/19/82
#
# annarbor: ANN ARBOR
#
aa|annarbor|4080|ann arbor 4080,
cr=^M, cud1=^J, ind=^J, bel=^G, tbc=^\^P^P, hts=^]^P1,
cup=^O%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%'@'%+%c,
cols#80, lines#40, cub1=^H, clear=^L$<2>, cuu1=^N, cuf1=^_,
home=^K, am, kbs=^^, kcud1=^J, kcuu1=^N, kcub1=^H, kcuf1=^_, khome=^K,
# From cbosg!chico!randvax!day Aug 1981
# alias aaa 'setenv TERM aaa-\!^; tset -e^H -Q; alias clr echo "^[\[2J^[\[H"'
# Be sure to change ^[ to escape in above alias. Needs function keys added.
# The ann arbor ambassador entries are merged from Mike O'Brien at Rand
# and Howard Katseff at Bell Labs, and are not thoroughly tested.
# Highly modified 6/22 by Mike O'Brien.
# split out into several for the various screen sizes by dave-yost at rand
# Many changes by Mark Horton 3/82
aaa-unk|ann arbor ambassador (internal - don't use this directly),
am, km, mir, xon, cols#80, it#8,
cr=^M, ht=^I, cbt=\E[Z, bel=^G, ind=^J, ri=\EM,
cuu1=\E[A, cuf1=\E[C, cud1=^J, cub1=^H,
cuu=\E[%p1%dA, cuf=\E[%p1%dC, cud=\E[%p1%dB, cub=\E[%p1%dD,
ed=\E[J, el=\E[K$<5>, clear=\E[H\E[J$<156>,
home=\E[H, cup=\E[%i%p1%d;%p2%dH,
hpa=\E[%p1%{1}%+%d`, vpa=\E[%p1%{1}%+%dd,
dl=\E[%p1%dM, dl1=\E[M, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
dch=\E[%p1%dP, dch1=\E[P, .ich=\E[%p1%d@$<4*>, .ich1=\E[@$<4>,
smir=\E[>4h, rmir=\E[>4l,
smul=\E[4m, rmul=\E[m, smso=\E[1m, rmso=\E[m,
bold=\E[1m, rev=\E[7m, blink=\E[5m, invis=\E[8m, sgr0=\E[0m,
sgr=\E[%?%p1%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
kcuu1=\E[A, kcud1=\E[B, kcub1=\E[D, kcuf1=\E[C, khome=\E[H, kbs=^H,
kich1=\E[@, krmir=\E6, kil1=\E[L, kclr=\E[J, kdch1=\E[P, kdl1=\E[M,
kf1=\EOA, kf2=\EOB, kf3=\EOC, kf4=\EOD, kf5=\EOE,
kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI, kf10=\EOJ,
rep=%p1%c\E[%p2%{1}%-%db, sc=\E7, rc=\E8,
flash=\E7\E[H\E[4m\E9$<20>\E[m\E9\E8,
is1=\E[m\E7\E[H\E9\E8, is3=\E[1Q\E[>20;30l,
smm=\E[>52h, rmm=\E[>52l,
.mc0=\E[0i, .mc5=\E[v, .mc4=^C,
aaa-unk-stat|Ann Arbor Ambassadors with status lines,
tsl=\E[>51h\E[1;%p1%dH\E[2K, fsl=\E[>51l, hs, eslok,
.dsl=\E7\E[60;0;0;30p\E[60;1H\E[K\E[H\E8,
aaa-unk-rv|Ann Arbor Ambassadors in reverse-video mode,
bold=\E[1;7m, rev=\E[m, blink=\E[5;7m, invis=\E[7;8m, sgr0=\E[7m,
rmul=\E[7m, smul=\E[4;7m, rmso=\E[7m, smso=\E[m, rs1=\E[H\E[7m\E[J,
sgr=\E[%?%p1%!%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
flash=\E7\E[H\E[7;4m\E9$<20>\E[7m\E9\E8,
is1=\E[7m\E7\E[H\E9\E8,
aaa-18|ann arbor ambassador/18 lines,
smcup=\E[18;0;0;18p, rmcup=\E[60;0;0;18p\E[60;1H\E[K,
is2=\E7\E[60;0;0;18p\E8, lines#18, use=aaa-unk,
aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
use=aaa-unk-rv, use=aaa-18,
aaa-20|ann arbor ambassador/20 lines,
smcup=\E[20;0;0;20p, rmcup=\E[60;0;0;20p\E[60;1H\E[K,
is2=\E7\E[60;0;0;20p\E8, lines#20, use=aaa-unk,
aaa-20-rv|ann arbor ambassador/20 lines+reverse video,
use=aaa-unk-rv, use=aaa-20,
aaa-22|ann arbor ambassador/22 lines,
smcup=\E[22;0;0;22p, rmcup=\E[60;0;0;22p\E[60;1H\E[K,
is2=\E7\E[60;0;0;22p\E8, lines#22, use=aaa-unk,
aaa-22-rv|ann arbor ambassador/22 lines+reverse video,
use=aaa-unk-rv, use=aaa-22,
aaa-24|ann arbor ambassador/24 lines,
smcup=\E[24;0;0;24p, rmcup=\E[60;0;0;24p\E[60;1H\E[K,
is2=\E7\E[60;0;0;24p\E8, lines#24, use=aaa-unk,
aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
use=aaa-unk-rv, use=aaa-24,
aaa-26|ann arbor ambassador/26 lines,
smcup=\E[26;0;0;26p, rmcup=\E[60;0;0;26p\E[60;1H\E[K,
is2=\E7\E[60;0;0;26p\E8, lines#26, use=aaa-unk,
aaa-26-rv|ann arbor ambassador/26 lines+reverse video,
use=aaa-unk-rv, use=aaa-26,
aaa-28|ann arbor ambassador/28 lines,
smcup=\E[28;0;0;28p, rmcup=\E[60;0;0;28p\E[60;1H\E[K,
is2=\E7\E[60;0;0;28p\E8, lines#28, use=aaa-unk,
aaa-28-rv|ann arbor ambassador/28 lines+reverse video,
use=aaa-unk-rv, use=aaa-28,
aaa-29|ann arbor ambassador/29 lines plus status line,
smcup=\E[30;1;0;30p,
rmcup=\E[60;1;0;30p\E[60;1H\E[K,
is2=\E7\E[H\E[K\E[60;1;0;30p\E8\E[>51h\E[H\E[>51l, lines#29,
use=aaa-unk-stat, use=aaa-unk,
aaa-29-rv|ann arbor ambassador/29 lines+status line+reverse video,
use=aaa-unk-rv, use=aaa-29,
aaa-30|ambassador|ann arbor ambassador/30 lines,
smcup=\E[30;0;0;30p, rmcup=\E[60;0;0;30p\E[60;1H\E[K,
is2=\E7\E[60;0;0;30p\E8, lines#30, use=aaa-unk,
aaa-30-rv|ann arbor ambassador/30 lines in reverse video,
use=aaa-unk-rv, use=aaa-30,
aaa-36|ann arbor ambassador/36 lines,
smcup=\E[36;0;0;36p, rmcup=\E[60;0;0;36p\E[60;1H\E[K,
is2=\E7\E[60;0;0;36p\E8, lines#36, use=aaa-unk,
aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
use=aaa-unk-rv, use=aaa-36,
aaa-40|ann arbor ambassador/40 lines,
smcup=\E[40;0;0;40p, rmcup=\E[60;0;0;40p\E[60;1H\E[K,
is2=\E7\E[60;0;0;40p\E8, lines#40, use=aaa-unk,
aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
use=aaa-unk-rv, use=aaa-40,
aaa-47|ann arbor ambassador/48 lines+status line,
smcup=\E[48;1;0;48p,
rmcup=\E[60;1;0;48p\E[60;1H\E[K,
is2=\E7\E[H\E[K\E[60;1;0;48p\E8\E[>51h\E[H\E[>51l, lines#47,
use=aaa-unk-stat, use=aaa-unk,
aaa-47-rv|ann arbor ambassador/48 lines+status line+reverse video,
use=aaa-unk-rv, use=aaa-47,
aaa|ambas|aaa-48|ann arbor ambassador/48 lines,
smcup=\E[48;0;0;48p, rmcup=\E[60;0;0;48p\E[60;1H\E[K,
is2=\E7\E[60;0;0;48p\E8, lines#48, use=aaa-unk,
aaa-rv|aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
use=aaa-unk-rv, use=aaa-48,
aaa-59|ann arbor ambassador/59 lines plus status line,
is2=\E7\E[H\E[K\E[60;1;0;60p\E8\E[>51h\E[H\E[>51l, lines#59,
use=aaa-unk-stat, use=aaa-unk,
aaa-59-rv|ann arbor ambassador/59 lines+status line+reverse video,
use=aaa-unk-rv, use=aaa-59,
aaa-60|ann arbor ambassador/60 lines,
is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8, lines#60, use=aaa-unk,
aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
use=aaa-unk-rv, use=aaa-60,
aaa-db|aaa-30-db|ann arbor ambassador 30 lines/destructive backspace,
cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
//go.sysin dd *
echo 'x - =data/beehive'
sed 's/^X//' <<'//go.sysin dd *' >=data/beehive
# # --------------------------------
# @(#)beehive 1.5 5/20/82
#
# beehive: BEEHIVE
#
# Reports are that most of these Beehive entries (except superbee) have not been
# tested and do not work right. rmso is a trouble spot. Be warned.
# set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
# Superbee - f1=escape, f2=^C.
# Note: there are at least 3 kinds of superbees in the world. The sb1
# holds onto escapes and botches ^C's. The sb2 is the best of the 3.
# The sb3 puts garbage on the bottom of the screen when you scroll with
# the switch in the back set to CRLF instead of AEP. This description
# is tested on the sb2 but should work on all with either switch setting.
# The f1/f2 business is for the sb1 and the xsb can be taken out for
# the other two if you want to try to hit that tiny escape key.
# This description is tricky: being able to use cup depends on there being
# 2048 bytes of memory and the hairy ind string.
# Now that we have separate ind and cud1, I imagine this could be improved.
sb1|superbee|superb|beehive super bee,
tbc=\E3, hts=\E1, is2=\EE, cud1=^J,
cr=^M$<10>, ind=\n$<3>\n$<3>\EA\EK$<3>\ET\ET, bel=^G,
am, cub1=^H, ed=\EJ$<3>, el=\EK$<3>,
clear=\EH\EJ$<3>, cols#80, cup=\EF%p2%3d%p1%3d, cr=\r$<1000>,
lm#25, da, db, xsb, dch1=\EP$<3>, dl1=\EM$<100>,
smso=\E_1, rmso=\E_0, lines#25,
cuf1=\EC, ht=^I, cuu1=\EA, home=\EH, cnorm=\n,
kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
kcud1=\EB, khome=\EH, kcub1=\ED, kcuf1=\EC, kcuu1=\EA,
# This loses on lines > 80 chars long, use at your own risk
superbeeic|super bee with insert char,
ich1=, smir=\EQ, rmir=\ER, use=superbee,
sb2|sb3|fixed superbee,
xsb@, use=superbee,
# good grief - does this entry make xmc when it doesn't have to?
# look at those spaces in rmso/smso. Seems strange to me.
# However, not having one to test changes on, I'll just leave it be...
bh3m|beehiveIIIm,
if=/usr/lib/tabset/beehive,
cr=^M, cud1=^J, ind=^J, bel=^G,
il1=^S$<160>, am, cub1=^H, ed=^R, el=^P, clear=^E^R,
cols#80, dl1=^Q$<350>, home=^E, lines#20, ll=^E^K,
cuf1=^L, ht=^I, rmso= ^_, smso=^] , cuu1=^K,
microb|microbee|micro bee series,
cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H,
ed=\EJ, el=\EK, clear=\EE, cols#80, cup=\EF%p1%' '%+%c%p2%' '%+%c,
kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex,
kcud1=\EB, khome=\EH, kcub1=\ED, kcuf1=\EC, kcuu1=\EA,
lines#24, cuf1=\EC, ht=^I, cuu1=\EA,
rmso=\Ed@ , smso= \EdP, rmul=\Ed@, smul=\Ed`,
//go.sysin dd *
echo 'x - =data/cdc'
sed 's/^X//' <<'//go.sysin dd *' >=data/cdc
# # --------------------------------
# @(#)cdc 1.3 3/22/82
#
# cdc: CONTROL DATA
#
cdc456|cdc,
cr=^M, cud1=^J, ind=^J, bel=^G, lines#24, cols#80, clear=^Y^X,
cuf1=^L, cuu1=^Z, cub1=^H, cup=\E1%p1%' '%+%c%p2%' '%+%c, home=^Y,
il1=\E\114, dl1=\E\112, el=^V, ed=^X, am,
cdc456tst,
cr=^M, cud1=^J, ind=^J, bel=^G,
lines#24, cols#80, clear=^y^x, cub1=^H, cup=\E1%p1%' '%+%c%p2%' '%+%c, am,
//go.sysin dd *
echo 'x - =data/concept'
sed 's/^X//' <<'//go.sysin dd *' >=data/concept
# # --------------------------------
# @(#)concept 1.6 5/20/82
#
# concept: (HUMAN DESIGNED SYSTEMS)
#
# From vax135!hpk Sat Jun 27 07:41:20 1981
# Extensive changes to c108 by arpavax:eric Feb 1982
#
# There seem to be a number of different versions of the C108 PROMS
# (with bug fixes in its Z-80 program).
# The first one that we had would lock out the keyboard of you
# sent lots of short lines (like /usr/dict/words) at 9600 baud.
# Try that on your C108 and see if it sends a ^S when you type it.
# If so, you have an old version of the PROMs.
# The old one also messed up running in with a 132-character line-length.
# You should configure the C108 to send ^S/^Q before running this.
# It is much faster (at 9600 baud) than the c100 because the delays
# are not fixed.
# Old cursor addressing that didn't understand > 95:
# cup=\Ea%p1%' '%+%c%p2%' '%+%c,
c108|c108-8p|concept108-8p|concept 108 w/8 pages,
rmcup=\Ev ^B p\Ep\r\n, use=c108-4p,
c108-4p|concept108-4p|concept 108 w/4 pages,
cr=^M, cud1=^J, ind=^J, bel=^G,
is2=\EU\E F\Ef\E7\E5\E8\El\ENH\EK\E\200\Eo&\200\Eo\47\E\E!,
smcup=\EU\Ev 8p\Ep\r, rmcup=\Ev ^A p\Ep\r\n,
il1=\E^R, cub1=^H, ed=\E^C, el=\E^S, clear=\E?\E^E, cols#80,
cup=\Ea%p1%?%p1%{95}%>%t^A%c%{96}%-%;%' '%+%c%p2%?%p2%{95}%>%t^A%c%{96}%-%;%' '%+%c,
dch1=\E^A, dl1=\E^B, rmir=\E\200, eo, smir=\E^P, lines#24, mir,
cuf1=\E=, kbs=^h, ul, cuu1=\E;, db, smul=\EG, rmul=\Eg,
cvvis=\EW, cnorm=\Ew, in, am, xenl, flash=\Ek$<50>\EK,
smkx=\EX, rmkx=\Ex, kcuu1=\E;,
kcud1=\E<, kcub1=\E>, kcuf1=\E=, khome=\E?,
kf1=\E5, kf2=\E6, kf3=\E7, kf4=\E8, kf5=\E9, kf6=\E:,
smso=\ED, rmso=\Ed, dim=\EE, bold=\ED, rev=\ED, sgr0=\Ee\Ed\Eg\Ec,
c108-rv-8p|concept 108 w/8 pages in reverse video,
smcup=\EU\Ev 8p\Ep\r, rmcup=\Ev ^B p\Ep\r\n, use=c108-rv-4p,
c108-rv-4p|concept 108 w/4 pages in reverse video,
flash=\EK\200\200\200\200\200\200\200\200\200\200\200\200\200\200\Ek,
is2=\EU\E F\Ef\E7\E5\E8\El\ENH\Ek\E\200\Eo&\200\Eo\47\E\E!,
use=c108-4p,
c108-na|c108-na-8p|concept 108 w/8 pages no arrows,
smkx@, rmkx@, kf7=\E;, kf8=\E<, kf9=\E=, use=c108-8p,
c108-rv-na|c108-rv-na-8p|concept 108 w/8 pages no arrows in rev video,
smkx@, rmkx@, kf7=\E;, kf8=\E<, kf9=\E=, use=c108-rv-8p,
# this needs new frotz in the cup capability for 2-char addrs when > 95....
c108-w|c108-w-8p|concept 108 w/8 pages in wide mode,
is2=\EU\E F\Ef\E7\E5\E8\El\ENH\EK\E\200\Eo&\200\Eo\47\E\E",
smcup=\EU\Ev 8^AD\Ep\r, rmcup=\Ev ^A0^AD\Ep\r\n,
cup=\Ea%p1%?%p1%{95}%>%t^A%c%{96}%-%;%' '%+%c%p2%?%p2%{95}%>%t^A%c%{96}%-%;%' '%+%c,
cols#132, use=c108-8p,
# Concepts have only window relative cursor addressing, not screen relative.
# To get it to work right here, smcup/rmcup (which were invented for the
# concept) lock you into a one page window for screen style programs.
# To get out of the one page window, we use a clever trick:
# we set the window size to zero ("\Ev " in rmcup) which the terminal
# recognizes as an error and resets the window to all of memory.
# This trick works on c100 but does not on c108, sigh.
#
# Some tty drivers use cr3 for concept, others use nl3, hence the delays on
# cr and ind below. This padding is only needed at 9600 baud.
# One or the other is commented out depending on local conventions.
# 2 nulls padding on rmcup isn't always enough. 6 works fine. Maybe less
# than 6 but more than 2 will work.
concept100|c100|concept|c104|c100-4p|concept 100,
is2=\EU\Ef\E7\E5\E8\El\ENH\EK\E\200\Eo&\200\Eo\47\E,
cr=$<9>^M, ind=^J,
# cr=^M, ind=^J$<9>,
bel=^G, cud1=^J, smcup=\EU\Ev 8p\Ep\r, rmcup=\Ev $<6>\Ep\r\n,
il1=\E^R$<3*>, am, cub1=^H, ed=\E^C$<16*>, el=\E^U$<16>, clear=^L$<2*>,
cup=\Ea%p1%' '%+%c%p2%' '%+%c, cols#80, dch1=\E^A$<16*>, dl1=\E^B$<3*>,
rmir=\E\200, eo, smir=\E^P, in, ip=$<16*>, lines#24, mir, cuf1=\E=,
ht=\t$<8>, kbs=^h, ul, cuu1=\E;, db, smul=\EG, rmul=\Eg,
xenl, cvvis=\EW, cnorm=\Ew, flash=\Ek$<20>\EK,
pb#9600, vt#8,
smul=\EG, rmul=\Eg, smso=\EE\ED, rmso=\Ed\Ee,
dim=\EE, rev=\ED, blink=\EC, prot=\EI, invis=\EH, sgr0=\EN\200,
rep=\Er%p1%c%p2%' '%+%c$<.2*>, smkx=\EX, rmkx=\Ex,
kcuu1=\E;, kcud1=\E<, kcub1=\E>, kcuf1=\E=, khome=\E?,
kf1=\E5, kf2=\E6, kf3=\E7,
c100-rvpp|c100-rv4ppp|c100 with printer port,
is2=\EU\Ef\E7\E5\E8\El\ENH\Ek\E\200\Eo&\200\Eo!\200\EQ"\EY(^W\Eo\47\E,
use=c100-rv,
c100-rvna|c100-rv4pna|c100 with no arrows,
smkx@, rmkx@, use=c100-rv,
c100-rv|c100-rv4p|concept100-rv|c100 rev video,
is2=\EU\Ef\E7\E5\E8\El\ENH\Ek\E\200\Eo&\200\Eo\47\E,
flash=\EK$<20>\Ek, cvvis@, cnorm@, smso=\EE, rmso=\Ee, use=c100,
//go.sysin dd *
echo 'x - =data/datamedia'
sed 's/^X//' <<'//go.sysin dd *' >=data/datamedia
# # --------------------------------
# @(#)datamedia 1.4 5/19/82
#
# datamedia: DATAMEDIA
#
dm1520|dm1521|1521|1520|datamedia 1520,
cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, ed=^K, el=^], clear=^L,
cup=^^%p2%' '%+%c%p1%' '%+%c, cols#80, home=^Y,
kcuu1=^_, kcud1=^J, kcub1=^H, kcuf1=^\, khome=^Y,
lines#24, cuf1=^\, cuu1=^_, xenl, ht=^I,
dm2500|datamedia2500|2500|datamedia 2500,
cud1=^J, ind=^J, bel=^G, il1=^P\n^X^]^X^]$<15>, cub1=^H, el=^W,
clear=^^^^\177, cup=^L%p2%'`'%^%c%p1%'`'%^%c, cols#80,
dch1=^P\b^X^]$<10*>,
dl1=^P^Z^X^]$<10*>, smdc=^P, rmdc=^X^], rmir=\377\377^X^]$<10>, home=^B,
ich1=^P^\^X^]$<10*>, smir=^P, lines#24, cuf1=^\,
pad=\377, smso=^N, rmso=^X^], cuu1=^Z,
dm3025|datamedia 3025a,
is2=\EQ\EU\EV, cr=^M, cud1=^J, ind=^J, bel=^G,
il1=\EP\n\EQ$<130>, cub1=^H, ed=\EJ$<2>, el=\EK, clear=\EM$<2>,
cup=\EY%p2%' '%+%c%p1%' '%+%c, cols#80, dch1=\b$<6>,
dl1=\EP\EA\EQ$<130>, smdc=\EP, rmdc=\EQ, rmir=\EQ, home=\EH,
smir=\EP, ip=, lines#24, cuf1=\EC, ht=^I,
smso=\EOA, rmso=\EO@, cuu1=\EA,
3045|dm3045|datamedia 3045a,
is2=\EU\EV, cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H,
ed=\EJ$<2>, el=\EK, clear=\EM$<2>, cup=\EY%p2%' '%+%c%p1%' '%+%c,
cols#80, dch1=\EB$<6>, smdc=, rmdc=, rmir=\EP, home=\EH,
ich1=, smir=\EP, ip=$<6>,
kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
khome=\EH, kcuu1=\EA, kcuf1=\EC, lines#24, cuf1=\EC, pad=\177, ht=^I,
eo, ul, cuu1=\EA, xenl,
# dt80/1 is2 a vt100 lookalike, but it doesn't seem to need any padding.
dt80|dmdt80|dm80|datamedia dt80/1,
cr=^M, cud1=^J, ind=^J, bel=^G, ed=\E[J, el=\E[K, clear=\E[2J\E[H,
cup=\E[%i%p1%d;%p2%dH, home=\E[H, cuf1=\E[C, ri=\EM,
smso=\E[7m, rmso=\E[m, cuu1=\E[A, smul=\E[4m, rmul=\E[m, use=vt100,
# except in 132 column mode, where it needs a little padding.
# This is2 still less padding than the vt100, and you can always turn on
# the ^S/^Q handshaking, smso you can use vt100 flavors for things like
# reverse video.
dt80-w|dmdt80-w|dm80-w|datamedia dt80/1 in 132 char mode,
cr=^M, cud1=^J, ind=^J, bel=^G, ed=\E[0J$<20>, cols#132, el=\E[0K$<20>,
cup=\E[%i%p1%d;%p2%dH$<5>, clear=\E[H\E[2J$<50>, cuu1=\E[A$<5>, use=dmdt80,
//go.sysin dd *
echo 'x - =data/dec'
sed 's/^X//' <<'//go.sysin dd *' >=data/dec
# # --------------------------------
# @(#)dec 1.7 5/20/82
#
# dec: DEC (DIGITAL EQUIPMENT CORPORATION)
#
# Note that xenl glitch in vt100 is not quite the same as concept,
# since the cursor is left in a different position while in the
# weird state (concept at beginning of next line, vt100 at end
# of this line) so all versions of vi before 3.7 don't handle
# xenl right on vt100.
# I assume you have smooth scroll off or are at a slow enough baud
# rate that it doesn't matter (1200? or less). Also this assumes
# that you set auto-nl to "on", if you set it off use vt100-nam below.
#
# Since there are two things here called vt100, the installer can make
# a local decision to make either one standard "vt100" by including
# it in the list of terminals in reorder, since the first vt100 in
# /etc/terminfo is the one that it will find. The choice is between
# nam (no automatic margins) and am (automatic margins), as determined
# by the wrapline switch (group 3 #2). I presonally recommend turning
# on the bit and using vt100-am, since having stuff hammer on the right
# margin is sort of hard to read. However, the xenl glitch does not occur
# if you turn the bit off.
#
# I am unsure about the padding requirements listed here. I have heard
# a claim that the vt100 needs no padding. It's possible that it needs
# padding only if the xon/xoff switch is off. For UNIX, this switch
# should probably be on.
#
# The vt100 uses rs2 and rf rather than is2/tbc/hts because the tab settings
# are in non-volatile memory and don't need to be reset upon login.
# Also setting the number of columns glitches the screen annoyingly.
# You can type "reset" to get them set.
vt100-mc|vt100 without advanced video option,
sgr@, smso=\E[7m , rmso=\E[m , xmc#1,
smul@, rmul@, bold@, rev@, blink@, sgr0@, use=vt100,
vt100|vt100-am|dec vt100,
cr=^M, cud1=^J, ind=^J, bel=^G, cols#80, lines#24,
clear=\E[;H\E[2J$<50>, cub1=^H, am, cup=\E[%i%p1%d;%p2%dH$<5>,
cuf1=\E[C$<2>, cuu1=\E[A$<2>, el=\E[K$<3>, ed=\E[J$<50>,
smso=\E[7m$<2>, rmso=\E[m$<2>, smul=\E[4m$<2>, rmul=\E[m$<2>,
bold=\E[1m$<2>, rev=\E[7m$<2>, blink=\E[5m$<2>, sgr0=\E[m$<2>,
sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, smkx=\E[?1h\E=, rmkx=\E[?1l\E>,
rf=/usr/lib/tabset/vt100, home=\E[H,
kcuu1=\EOA, kcud1=\EOB, kcuf1=\EOC, kcub1=\EOD, kbs=^H,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ht=^I, ri=\EM$<5>,
vt#3, xenl, xon, sc=\E7, rc=\E8, csr=\E[%i%p1%d;%p2%dr,
vt100-nam|vt100 w/no am,
am@, xenl@, use=vt100-am,
vt100-23|vt100 for use with sysline,
lines#23, is2=\E[1;23r\E[23;1H,
hs, eslok, tsl=\E7\E[24;%p1%dH\E[1K, fsl=\E8, use=vt100-am,
gt42|dec gt42,
cr=^M, cud1=^J, bel=^G,
cub1=^H, cols#72, lines#40, os,
vt132|vt132,
il1=\E[L$<99>, dl1=\E[M$<99>, ip=$<7>, dch1=\E[P$<7>, rmir=\E[4l,
smir=\E[4h, xenl, ind=^J$<30>, use=vt100,
gt40|dec gt40,
cr=^M, cud1=^J, bel=^G,
cub1=^H, cols#72, lines#30, os,
vt50|dec vt50,
cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, ed=\EJ, el=\EK, clear=\EH\EJ,
cols#80, lines#12, cuf1=\EC, ht=^I, cuu1=\EA,
dw1|decwriter I,
cr=^M, cud1=^J, ind=^J, bel=^G,
cub1=^H, cols#72, hc, os,
vt50h|dec vt50h,
cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, ed=\EJ, el=\EK,
clear=\EH\EJ, cup=\EY%p1%' '%+%c%p2%' '%+%c, cols#80, lines#12,
cuf1=\EC, ht=^I, ri=\EI, cuu1=\EA,
vt100-s|dec vt100 132 cols 14 lines (w/o advanced video option),
lines#14, use=vt100-w,
vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
cols#132, lines#24, rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
vt100-w-nam|dec vt100 132 cols (w/advanced video),
cols#132, lines#24, rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, vt@, use=vt100-nam,
vt52|dec vt52,
cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, ed=\EJ, el=\EK,
clear=\EH\EJ, cup=\EY%p1%' '%+%c%p2%' '%+%c, cols#80, lines#24,
cuf1=\EC, ht=^I, ri=\EI, cuu1=\EA,
kcuu1=\EA, kcud1=\EB, kcuf1=\EC, kcub1=\ED, kbs=^H,
# The dw3 (and dw4?) supposedly have some fancy stuff, like settable tabs
# and column addressing. But I don't know the details, and nobody seems
# to use them except for consoles so it has never really mattered.
dw2|dw3|decwriter|dw|decwriter II,
cr=^M, cud1=^J, ind=^J, bel=^G,
kbs=^h, cub1=^H, cols#132, hc, os,
# From cbosg!ucbvax!G:tut Thu Sep 24 22:10:46 1981
dw4|decwriter IV,
cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, cols#132, hc, os, am,
ht=^I, is2=\Ec, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS, kbs=^H,
//go.sysin dd *
echo 'x - =data/diablo'
sed 's/^X//' <<'//go.sysin dd *' >=data/diablo
# # --------------------------------
# @(#)diablo 1.4 5/19/82
#
# diablo: DAISY WHEEL PRINTERS
#
# The A manufacturer represents Diablo, DTC, Xerox, Qume, and other Daisy
# wheel terminals until such time as terminfo distinguishes between them
# enough to justify separate codes.
1620|1640|450|diablo 1620,
cr=^M, cud1=^J, ind=^J, bel=^G, tbc=\E2, hts=\E1, hpa=\E\t%i%p1%c, kbs=^H,
cub1=^H, cols#132, ff=^L, hc, hu=\EU, hd=\ED, os, ht=^I, cuu1=\E\n,
1620-m8|1640-m8|diablo 1620 w/8 column left margin,
cr=^M, cud1=^J, ind=^J, bel=^G, cols#124, is2=\r \E9, use=1620,
# DTC 382 with VDU. Has no ed so we fake it with el. Standout works but
# won't go away without dynamite. The terminal has tabs, but I'm getting
# tired of fighting the braindamage. If no tab is set or the terminal's
# in a bad mood, it glitches the screen around all of memory. Note that
# return puts a blank ("a return character") in the space the cursor was
# at, so we use ^P return (and thus ^P newline for newline). Note also
# that if you turn off tabs and let Unix expand tabs, curses won't work
# (current version) because it doesn't turn off this bit, and cursor
# addressing sends a tab for row/column 9. What a losing terminal! I
# have been unable to get tabs set in all 96 lines - it always leaves at
# least one line with no tabs in it, and once you tab through that line,
# it completely weirds out.
dtc|mc0|dtc382|382,
.if=/usr/lib/tabset/dtcvdu,
bel=^G, cud1=^J, ind=^J, il1=^P^Z, am, cub1=^H,
cols#80, el=^P^U, clear=^P^]$<20>, cup=^P^Q%p2%c%p1%c, dch1=^X,
dl1=^P^S, rmir=^Pi, home=^P^R, smir=^PI, cnorm=^Pb, cvvis=^PB, pad=\177,
rmcup=^P^]$<20>, lines#24, cuf1=^PR, .rmso=^P \200, .smso=^P \002^PF,
smul=^P \020, rmul=^P \200, cuu1=^P^L, xhp, lm#96,
da, db, cr=^P^M, ed=^P^U^P^S^P^S,
dtc300s|300|300s|dtc 300s,
tbc=\E3, hts=\E1, cr=^M, cud1=^J, ind=^J, bel=^G,
kbs=^h, cub1=^H, cols#132, ff=^L, hc, hu=\EH, hd=\Eh, os, ht=^I, cuu1=^Z,
gsi,
cub1=^H, cols#132, hc, hd=\Eh, hu=\EH, os, ht=^I, cuu1=^Z,
cr=^M, cud1=^J, ind=^J, bel=^G,
aj830|aj832|aj|anderson jacobson,
cr=^M, cud1=^J, ind=^J, bel=^G,
cub1=^H, hc, hd=\E9, hu=\E8, os, cuu1=\E7,
# From cbosg!ucbvax!pur-ee!cincy!chris Thu Aug 20 09:09:18 1981
# This is incomplete, but it's a start.
5520|nec|spinwriter|nec 5520|,
tbc=\E3, hts=\E1, cr=^M, cud1=^J, ind=^J, bel=^G,
kbs=^h, cub1=^H, cols#132, ff=^L, hc, hu=\E]s\E9\E]W, hd=\E]s\n\E]W,
os, ht=^I, cuu1=\E9,
qume5|qume|Qume Sprint 5,
tbc=\E3, hts=\E1, cr=^M, cud1=^J, ind=^J, bel=^G,
kbs=^h, cub1=^H, cols#80, ff=^L, hc, hu=\EH, hd=\Eh, os, ht=^I, cuu1=^Z,
# I suspect the xerox1720 is the same as the diablo 1620.
x1720|x1700|1700|x1750|xerox 1720,
cols#132, cub1=^H, ff=^L, hc, os, ht=^I,
cr=^M, cud1=^J, ind=^J, bel=^G,
tbc=\E2, hts=\E1,
//go.sysin dd *
echo 'x - =data/general'
sed 's/^X//' <<'//go.sysin dd *' >=data/general
# # --------------------------------
# @(#)general 1.4 5/19/82
#
# general: GENERAL TERMINAL (formerly INFOTON)
#
# Infoton is now called General Terminal Corp.
# gt100 sounds like something DEC would come out with. Lets hope they don't.
i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
cr=^M, cud1=^J, ind=^J, bel=^G, clear=^L, ed=\EJ, el=\EK,
lines#24, cols#80, il1=\EL, dl1=\EM, cuu1=\EA, cuf1=\EC,
home=\EH, cup=\Ef%p2%' '%+%c%p1%' '%+%c,
flash=\Eb\Ea, am, cub1=^H, smso=\Eb, rmso=\Ea,
# Looks like an ANSI terminal, but what a kludge for dch1! I bet smdc/rmdc
# could be used even if the terminal is really that braindamaged.
# But you would think being ANSI they would do \E[P right. Hmm.
i400|400|infoton 400,
cr=^M, cud1=^J, ind=^J, bel=^G, if=/usr/lib/tabset/infoton_tabs,
il1=\E[L, am, cub1=^H, el=\E[N, clear=\E[2J, cup=\E[%i%p1%3d;%p2%3dH,
cols#80, dl1=\E[M, lines#25, cuf1=\E[C, cuu1=\E[A,
smir=\E[4h\E[2Q, rmir=\E[4l\E[0Q, dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q,
addrinfo,
cr=^M, cud1=^J, ind=^J, bel=^G,
lines#24, cols#80, clear=^L, home=^H, cuf1=^Y, ed=^K,
cuu1=^\, am, cub1=^Z, cup=\037%i%p1%{1}%-%c%p2%{1}%-%c, ll=^H^\,
# No, I don't know what this is. But KAS happens to be Kurt Shoens initials.
infotonKAS,
cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^Z,
ed=^K, clear=^L, cols#80, lines#24, cuf1=^Y, cuu1=^\, ll=^H^\,
//go.sysin dd *
echo 'x - =data/hazeltine'
sed 's/^X//' <<'//go.sysin dd *' >=data/hazeltine
# # --------------------------------
# @(#)hazeltine 1.4 5/19/82
#
# hazeltine: HAZELTINE
#
# Since cuf1 is blank, when you want to erase something you
# are out of luck. You will have to do ^L's a lot to
# redraw the screen. h1000 is untested. It doesn't work in
# vi - this terminal is too dumb for even vi. (The code is
# there but it isn't debugged for this case.)
h1000|hazeltine 1000,
cub1=^H, home=^K, clear=^L, cuf1= , cols#80, lines#12, cr=^M, cud1=^J, ind=^J, bel=^G,
# Note: the h1552 appears to be the first Hazeltine terminal which
# is not braindamaged. It has tildes and backprimes and everything!
# Be sure the auto lf/cr switch is set to cr.
h1552|hazeltine 1552,
cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EE, dl1=\EO,
kf1=\EP, lf1=blue, kf2=\EQ, lf2=red, kf3=\ER, lf3=green, use=vt52,
h1552rv|hazeltine 1552 reverse video,
cr=^M, cud1=^J, ind=^J, bel=^G,
smso=\ES, rmso=\ET, use=h1552,
# From cbosg!ucbvax!pur-ee!cincy!chris Thu Aug 20 09:09:18 1981
h1420|hazeltine 1420,
cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, am, lines#24, cols#80,
il1=\E^Z, dl1=\E^S, ed=\E^X, clear=\E\034, cuu1=\E^L,
cuf1=^P, el=\E^O, ht=^N, cup=\E^Q%p2%c%p1%' '%+%c, smso=\E\037, rmso=\E^Y,
h1500|hazeltine 1500,
cr=^M, cud1=^J, ind=^J, bel=^G, il1=~^Z$<40>, am,
cub1=^H, ed=~^X$<10>, el=~^O, clear=~^\, cup=~^Q%p2%c%p1%c, cols#80,
dl1=~^S$<40>, cud1=~^K, lines#24, cuf1=^P, .rmso=~^_, .smso=~^Y, cuu1=~^L,
# h1510 assumed to be in sane escape mode. Else use h1500.
h1510|hazeltine 1510,
cr=^M, cud1=^J, ind=^J, bel=^G,
il1=\E^Z, am, cub1=^H, ed=\E^X, el=\E^O, clear=\E^\, cup=\E^Q%p2%c%p1%c, cols#80,
dl1=\E^S, cud1=\E^K, lines#24, cuf1=^P, .rmso=\E^_, .smso=\E^Y, cuu1=\E^L,
h1520|hazeltine 1520,
cr=^M, cud1=^J, ind=^J, bel=^G, il1=~^Z, am, cub1=^H,
ed=~^X, el=~^O, clear=~\034, cup=~^Q%p2%c%p1%c$<1>, cols#80,
dl1=~^S, cud1=~^K, hz, lines#24, cuf1=^P, rmso=~^Y, smso=~\037, cuu1=~^L, home=~^R,
# Note: h2000 won't work well because of a clash between upper case and ~'s.
h2000|hazeltine 2000,
cud1=^J, ind=^J, bel=^G,
il1=~^z$<6>, am, cub1=^H, clear=~^\$<6>, cup=~^q%p2%c%p1%c, cols#74,
dl1=~^s$<6>, home=~^r, lines#27, pad=\177,
//go.sysin dd *
echo 'x - =data/header'
sed 's/^X//' <<'//go.sysin dd *' >=data/header
# ------------------------
#
# Terminfo source file %W% (CBOSGD) %G%
# Mark Horton, U.C. Berkeley, Bell Telephone Laboratories
#
# This file describes capabilities of various terminals, as needed by
# software such as screen editors. It does not attempt to describe
# printing terminals very well, nor graphics terminals. Someday.
# See terminfo(5) in the Unix Programmers Manual for documentation.
#
# Conventions: First entry is two chars, first char is manufacturer,
# second char is canonical name for model or mode.
# Third entry is the one the editor will print with "set" command.
# Last entry is verbose description.
# Others are mnemonic synonyms for the terminal.
#
# Terminal naming conventions:
# Terminal names look like <manufacturer> <model> - <modes/options>
# Certain abbreviations (e.g. c100 for concept100) are also allowed
# for upward compatibility. The part to the left of the dash, if a
# dash is present, describes the particular hardware of the terminal.
# The part to the right can be used for flags indicating special ROM's,
# extra memory, particular terminal modes, or user preferences.
# All names are always in lower case, for consistency in typing.
# Because of file naming restrictions, terminal names should not contain
# period or slash, in fact, entirely alphanumeric characters plus dash are
# highly recommended. These restrictions do not apply to the verbose name.
#
# The following are conventionally used flags:
# rv Terminal in reverse video mode (black on white)
# 2p Has two pages of memory. Likewise 4p, 8p, etc.
# w Wide - in 132 column mode.
# pp Has a printer port which is used.
# na No arrow keys - terminfo ignores arrow keys which are
# actually there on the terminal, so the user can use
# the arrow keys locally.
#
# There are some cases where the same name is used for two different
# terminals, e.g. "teleray" or "2621" or "vt100". In these cases,
# if a site has one of these, they should choose a local default and
# bring that terminal to the front in the reorder script. This works
# because tgetent picks the first match in /etc/terminfo.
# The list of names intentionally duplicated is:
# 2621, c108, dtc, hp2621, teleray, tvi, vt100.
#
# If you absolutely MUST check for a specific terminal (this is discouraged)
# check for the 2nd entry (the canonical form) since all other codes are
# subject to change. The two letter codes are there for version 6 and are
# EXTREMELY subject to change, or even to go away if version 6 becomes for
# all practical purposes obsolete. We would much rather put in special
# capabilities to describe your terminal rather than having you key on the
# name.
#
# Special manufacturer codes:
# A: hardcopy daisy wheel terminals
# M: Misc. (with only a few terminals)
# q: Homemade
# s: special (dialup, etc.)
#
# Comments in this file begin with # - they cannot appear in the middle
# of a terminfo entry. Individual entries are commented out by
# placing a period between the colon and the capability name.
#
# This file is to be installed with an editor script (reorder)
# that moves the most common terminals to the front of the file.
# If the source is not available, it can be constructed by sorting
# the above entries by the 2 char initial code.
//go.sysin dd *
echo 'x - =data/heath'
sed 's/^X//' <<'//go.sysin dd *' >=data/heath
# # --------------------------------
# @(#)heath 1.4 5/19/82
#
# heath: HEATHKIT (ZENITH)
#
h19-a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
cr=^M, cud1=^J, ind=^J, bel=^G, il1=\E[1L$<1*>, am, cub1=^H, ed=\E[J,
el=\E[K, clear=\E[2J, cup=\E[%i%p1%2d;%p2%2dH, cols#80,
dch1=\E[1P, dl1=\E[1M$<1*>, cud1=\E[1B,
rmir=\E[4l, home=\E[H, smir=\E[4h, lines#24, mir,
cuf1=\E[1C, rmacs=\E[10m, smacs=\E[11m, msgr, ht=^I,
rmso=\E[0m, smso=\E[7m, cuu1=\E[1A, cvvis=\E[>4h, cnorm=\E[>4l,
kbs=^h, kcuu1=\E[1A, kcud1=\E[1B, kcub1=\E[1D, kcuf1=\E[1C,
khome=\E[H,
kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, lf6=blue,
lf7=red, lf8=white, kf6=\EOP, kf7=\EOQ, kf8=\EOR,
ri=\EM, is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[0m\E[11m\E[?7h,
h19-bs|heathkit w/keypad shifted,
smkx=\Et, rmkx=\Eu, use=h19-b,
h19-smul|heathkit w/keypad shifted/underscore cursor,
smkx=\Et, rmkx=\Eu, use=h19-u,
h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EL$<1*>, am, cub1=^H,
ed=\EJ, el=\EK, clear=\EE, cup=\EY%p1%' '%+%c%p2%' '%+%c, cols#80,
dch1=\EN, dl1=\EM$<1*>, cud1=\EB, rmir=\EO, home=\EH, smir=\E@,
lines#24, mir, cuf1=\EC, rmacs=\EF, smacs=\EG, msgr, ht=^I,
ri=\EI, rmso=\Eq, smso=\Ep, cuu1=\EA, cvvis=\Ex4, cnorm=\Ey4,
kbs=^h, kcuu1=\EA, kcud1=\EB, kcub1=\ED, kcuf1=\EC, khome=\EH,
kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
lf6=blue, lf7=red, lf8=white, kf6=\EP, kf7=\EQ, kf8=\ER,
hs, eslok, tsl=\Ej\Ex5\EY8%p1%' '%+%c\Eo\Eo, fsl=\Ek\Ey5,
h19-u|heathkit with underscore cursor,
cvvis@, cnorm@, use=h19-b,
# This still doesn't work right - something funny is going on with return
# and linefeed in the reach program.
reach|h89|h89 running reach,
cr@, cud1=\EB, is2=\Ey3\Ev, use=h19-b,
//go.sysin dd *
echo 'x - =data/homebrew'
sed 's/^X//' <<'//go.sysin dd *' >=data/homebrew
# # --------------------------------
# @(#)homebrew 1.4 5/19/82
#
# homebrew: HOME MADE TERMINALS
#
bc|bill croft homebrew,
cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H,
cup=\E=%p1%' '%+%c%p2%' '%+%c, clear=^Z, cols#96, home=^^, lines#72,
cuf1=^L, cuu1=^K, flash=,
nucterm|rayterm|nuc|NUC homebrew,
cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, clear=^L$<1>,
lines#24, cols#80, cuf1=^C, cuu1=^N, home=^B, ll=^K, el=^A, ed=^E,
carlock|klc,
cr=^M, cud1=^J, ind=^J, bel=^G, il1=^E, am, el=^U, clear=^Z$<100>,
cup=\E=%p1%' '%+%c%p2%' '%+%c, cols#80, dch1=\177, dl1=^D, ed=,
rmir=^T, home=^^, smir=^T, lines#24, cuf1=^L, rmso=^V, smso=^V,
cuu1=^K, flash=\EV\EV,
ex3000,
cr=^M, cud1=^J, ind=^J, bel=^G, lines#24, cols#80, home=^Q,
exidy|exidy2500|exidy sorcerer rmacs dm2500,
cr=^M, cud1=^J, ind=^J, bel=^G, il1=^P^J^X, am, cub1=^H,
el=^W, clear=^^, cup=^L%p2%'`'%^%c%p1%'`'%^%c, cols#64,
dch1=\b, dl1=^P^Z^X, smdc=^P, ed=^X, rmir=^X, home=^B, ich1=^\,
smir=^P, lines#30, cuf1=^\, ht=^I, smso=^N, rmso=^X, cuu1=^Z,
# This came from the comp ctr who got it from some user. Smart indeed!
sexidy|exidy smart,
cr=^M, cud1=^J, ind=^J, bel=^G, lines#24, cols#64, clear=^L, home=^Q,
cuf1=^S, cuu1=^W, cub1=^H, cub1=^A, kcud1=^S,
# netx and xitex are almost identical, except for the padding
# on clear screen. Hmm.
netx|netronics,
cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, ed=^F^E$<2000>, el=^E$<1600>,
clear=^L$<466>, cup=\E=%p1%'@'%+%c%p2%'@'%+%c, cols#64, home=^D,
lines#16, cuf1=\E+ at A, pad=\200, ri=\E=@@^K, cuu1=^K,
xitex|xitex sct-100,
cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, ed=^F^E$<2000>, el=^E$<1600>,
clear=^L$<400>, cup=\E=%p1%'@'%+%c%p2%'@'%+%c, cols#64, home=^D,
lines#16, cuf1=\E+ at A, pad=\200, ri=\E=@@^K, cuu1=^K,
ubell|ubellchar,
if=/usr/lib/tabset/ubell,
cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, ht=^I, el=\Ed,
clear=^Z, cup=\E=%p1%' '%+%c%p2%' '%+%c, cols#80, lines#24, cuf1=^L,
cuu1=^K, home=^^,
ttywilliams,
cr=^M, cud1=^J, ind=^J, bel=^G, cols#80, lines#12,
cub1=^Y, cud1=^K, cuu1=^Z, clear=^^, el=^_, am, home=^], cuf1=^X,
//go.sysin dd *
echo 'x - =data/hp'
sed 's/^X//' <<'//go.sysin dd *' >=data/hp
# # --------------------------------
# @(#)hp 1.7 5/20/82
#
# hp: HEWLETT PACKARD
#
# Note: no "home" on HP's since that homes to top of memory, not screen.
# Due to severe 2621 braindamage, the only way to get the arrow keys to
# transmit anything at all is to turn on the function key labels
# (f1-f8) with smkx, and even then the poor user has to hold down shift!
# The default 2621 turns off the labels except when it has to to enable
# the function keys. If your installation prefers labels on all the time,
# or off all the time (at the "expense" of the function keys) move the
# 2621-nl or 2621-wl labels to the front using reorder.
# Note: there are newer ROM's for 2621's that allow you to set strap A
# so the regular arrow keys xmit \EA, etc, as with the 2645. However,
# even with this strap set, the terminal stops xmitting if you reset it,
# until you unset and reset the strap! Since there is no way to set/unset
# the strap with an escape sequence, we don't use it in the default.
# If you like, you can use 2621-ba (braindamaged arrow keys).
hp2621-ba|2621-ba|2621 w/new rom and strap A set,
smkx@, rmkx@,
kcuu1=\EA, kcud1=\EB, kcub1=\ED, kcuf1=\EC, khome=\Eh, use=hp2621,
# 2621 with labels on all the time - normal outside vi, function inside vi.
hp2621-wl|2621-wl|hp 2621 w/labels,
is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
# 2621 with function labels. Most of the time they are off,
# but inside vi, the function key labels appear. You have to
# hold down shift to get them to xmit.
hp2621-fl|2621|hp2621|hp2621a|hp2621p|2621a|2621p|2621-fl|2621A|2621P|hp 2621,
is2=\E&j@\r, cbt=\Ei, cup=\E&a%p2%dc%p1%dY,
dch1=\EP$<2>, ip=$<2>, pb#19200,
smso=\E&dD, rmso=\E&d@, smul=\E&dD, rmul=\E&d@, sgr0=\E&d@, xhp@,
khome=\Ep\r, kcuu1=\Et\r, kcub1=\Eu\r, kcuf1=\Ev\r, kcud1=\Ew\r,
kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
kf7=\Ev\r, kf8=\Ew\r, smkx=\E&jB, rmkx=\E&j@, ht=^I$<2>, xon, use=hp,
# 2621k45: untested
2621k45|hp2621k45|k45|hp 2621 with 45 keyboard,
kbs=^H, kcuu1=\EA, kcud1=\EB, kcub1=\ED, kcuf1=\EC, khome=\Eh,
smkx=\E&s1A, rmkx=\E&s0A, use=2621,
# This terminal should be used at 4800 baud or less. It needs padding for
# plain characters at 9600, I guessed at an appropriate cr delay.
# It really wants ^E/^F handshaking, but that doesn't work well even if
# you write software to support it.
2645|hp2645|hp45|hp 264x series,
dim=\E&dH, rev=\E&dB, smul=\E&dD, blink=\E&dA, sgr0=\E&d@,
sgr=\E&d%'@'%?%p1%t%'B'%|%;%?%p2%t%'D'%|%;%?%p3%t%'B'%|%;%?%p4%t%'A'%|%;%?%p5%t%'H'%|%;%?%p6%t%'B'%|%;%c,
kcuu1=\EA, kcud1=\EB, kcub1=\ED, kcuf1=\EC, khome=\Eh,
smkx=\E&s1A, rmkx=\E&s0A, knp=\EU, kpp=\EV, kri=\ET, kind=\ES,
kil1=\EL, kdl1=\EM, kich1=\EQ, kdch1=\EP,
kel=\EK, ked=\EJ, krmir=\ER, pb#9600, cr=^M$<20>, use=hp,
hp|hewlett-packard,
tbc=\E3, hts=\E1, cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EL, am, cub1=^H,
ed=\EJ, el=\EK, hpa=\E&a%p1%dC, clear=\EH\EJ,
cup=\E&a%p2%dc%p1%dY$<6>, cols#80, vpa=\E&a%p1%dY, lm#0, da, db,
dch1=\EP, dl1=\EM, rmir=\ER, smir=\EQ, kbs=^H, lines#24, mir,
cuf1=\EC, ht=^I, rmso=\E&d@, smso=\E&dJ,
smul=\E&dD, rmul=\E&d@, cuu1=\EA, xhp, vt#6,
hp-0|hewlett-packard for testing of curses and the like,
cr=^M, cud1=^J, ind=^J, bel=^G, am, cuf1=\EC,
cub1=^H, clear=\EH\EJ, home=\E&a0c0Y, cols#80, lines#24,
hp-1,
ht=^I, cuu1=\EA, use=hp-0,
hp-2,
cup=\E&a%p2%dc%p1%dY$<6>, use=hp-1,
hp-3,
ed=\EJ, el=\EK, use=hp-2,
# This entry does not use any of the fancy windowing stuff of the 2626.
# Indeed, terminfo does not yet handle such stuff. Since changing any window
# clears memory, it is probably not possible to use this for screen opt.
# ed is incredibly slow most of the time - I am guessing at the exact padding.
# Since the terminal uses xoff/xon this is intended only for cost computation,
# so that the terminal will prefer el or even dl1 which is probably faster!
hp2626|hp2626a|hp2626p|2626|2626a|2626p|2626A|2626P|hp 2626,
dch1=\EP$<2>, ip=$<2>, rmso=\E&d@, smso=\E&dB, ed=\EJ$<500>,
rev=\E&dB, smul=\E&dD, blink=\E&dA, invis=\E&dS, sgr0=\E&d@,
rmul=\E&d@,
sgr=\E&d%'@'%?%p1%t%'B'%|%;%?%p2%t%'D'%|%;%?%p3%t%'B'%|%;%?%p4%t%'A'%|%;%c,
khome=\Eh, kcuu1=\EA, kcub1=\ED, kcuf1=\EC, kcud1=\EB,
smkx=\E&s1A, rmkx=\E&s0A, knp=\EU, kpp=\EV, kri=\ET,
kind=\ES, kil1=\EL, kdl1=\EM, kich1=\EQ, kdch1=\EP,
kel=\EK, ked=\EJ, krmir=\ER,
ind=\ES, ht=^I$<2>, xhp, use=2621,
# This entry is for sysline. It allocates a 23 line window with a 115 line
# workspace for regular use, and a 1 line window for the status line.
# This assumes port 2 is being used.
# Turn off horizontal line, Create ws #1 with 115 lines,
# Create ws #2 with 1 line, Create window #1 lines 1-23,
# Create window #2 lines 24-24, Attach cursor to workspace #1.
# Note that this clears the tabs so it must be done by tset before
# it sets the tabs.
2626-23|hp 2626 using only 23 lines,
tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC,
fsl=\E&d@\E&w7f2p1I\E&w4f1I, eslok, hs,
is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I
\E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
lines#23, use=2626,
# Force terminal back to 24 lines after being 23.
2626-24|hp 2626 using all 24 lines,
is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I
\E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
use=2626,
# Various entries useful for small windows on 2626.
2626-12,
lines#12, use=2626,
2626-12x40,
cols#40, lines#12, use=2626,
2626-x40,
cols#40, use=2626,
2626-11,
lines#11, use=2626-23,
# cD is a pain - but it only screws up at 9600 baud.
# You should use this terminal at 4800 baud or less.
hp2648|hp2648a|2648a|2648A|2648|HP 2648a graphics terminal,
clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
dch1=\EP$<7>, ip=$<5>, use=2645,
# 2640a doesn't have the Y cursor addressing feature, and C is memory relative
# instead of screen relative, as we need.
2640|hp2640a|2640a|hp 2640a,
cup@, smkx@, rmkx@, use=2645,
2640b|hp2640b|2644a|hp2644a|hp 264x series,
smkx@, rmkx@, use=2645,
# 2621 using all 48 lines of memory, only 24 visible at any time. Untested.
2621-48|48 line 2621,
lines#48, home=\EH, cup=\E&a%p2%dc%p1%dR, use=2621,
# 2621 with no labels ever. Also prevents vi delays on escape.
hp2621-nl|2621-nl|hp 2621 with no labels,
smkx@, rmkx@, khome@, kcuu1@, kcub1@, kcuf1@, kcud1@, use=hp2621-fl,
# Needed for UCB ARPAVAX console, since lsi-11 expands tabs (wrong).
hp2621-nt|2621-nt|hp 2621 w/no tabs,
ht@, use=hp2621,
//go.sysin dd *
echo 'x - =data/ibm'
sed 's/^X//' <<'//go.sysin dd *' >=data/ibm
# # --------------------------------
# @(#)ibm 1.4 5/19/82
#
# ibm: IBM, INTERACTIVE SYSTEMS, and INTECOLOR
#
# Some of these should go in the misc category, IBM, ISC, and intecolor can't
# all have I. I will wait to see who comes out with more terminals.
# These compucolors appear similar, but they at least have different
# sized screens. I don't know what's going on here.
# There is further confusion since intecolor seems to call themselves isc too.
8001|isc8001|compucolor|intecolor,
cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EU, am, cub1=^Z,
clear=^L$<3*>, cup=^C%p2%c%p1%c, cols#80, rmdc=\EQ, smdc=\EQ, ed=\EF,
dch1=\177, dl1=\EV, rmir=\EF, smir=\EQ, lines#40, cuf1=^Y$<1>,
ht=\t$<8>, cuu1=^\, home=^H$<1>,
compucolor2|compucolorii,
cr=^M, cud1=^J, ind=^J, bel=^G,
ht=^I, am, cup=^C%p2%c%p1%c, cub1=^Z, lines#32, cols#64,
clear=^L, home=^H, cuf1=^Y, cuu1=^\,
# From cithep!eric Wed Sep 16 08:06:44 1981
intext|Interactive Systems Corporation modified owl 1200,
cr=^M, cud1=^J, ind=^J, bel=^G, il1=\020$<5.5*>, am, cub1=^_,
cub1=^H, cbt=^Y, ed=\026J$<5.5*>, el=^K\160^R,
clear=\014$<132>, cup=\017%p1%' '%+%c%p2%' '%+%c, cols#80,
dch1=\022$<5.5*>, dl1=\021$<5.5*>, rmir=\026\074,
smir=\026\073, ip=$<5.5*>, lines#24, cuf1=\036, ht=^I,
cuu1=\034, rmso=^V# , xmc#1, smso=^V$\054,
kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=\034, kbs=^H, khome=^Z,
kf1=^VA\r, kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r,
kf6=^VF\r, kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, kf0=^VJ\r,
ibm|ibm3101|3101|i3101|IBM 3101-10,
.if=/usr/lib/tabset/3101,
cr=^M, cud1=^J, ind=^J, bel=^G, tbc=\EH, hts=\E0, am, cub1=^H,
clear=\EK, lines#24, cols#80, cuf1=\EC, cuu1=\EA, ed=\EJ, el=\EI,
kcud1=\EB, kcub1=\ED, kcuf1=\EC, kcuu1=\EA,
home=\EH, cup=\EY%p1%' '%+%c%p2%' '%+%c, ht=^I,
//go.sysin dd *
echo 'x - =data/lsi'
sed 's/^X//' <<'//go.sysin dd *' >=data/lsi
# # --------------------------------
# @(#)lsi 1.4 5/19/82
#
# lsi: LEAR SIEGLER (ADM)
#
# If the adm31 gives you trouble with standout mode, check the DIP switch
# in position 6, bank @c11, 25% from back end of pad. Should be OFF.
# If there is no such switch, you have an old adm31 and must use oadm31
adm31|31|lsi adm31,
is2=\Eu\E0, cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EE, am, cub1=^H,
el=\ET, cup=\E=%p1%' '%+%c%p2%' '%+%c, clear=\E*, ed=\EY, cols#80,
dch1=\EW, dl1=\ER, rmir=\Er, home=^^, smir=\Eq,
kf0=^A0\r, kf1=^A1\r, kf2=^A2\r, kf3=^A3\r, kf4=^A4\r,
kf5=^A5\r, kf6=^A6\r, kf7=^A7\r, kf8=^A8\r, kf9=^A9\r,
kcud1=^J, kcub1=^H, kcuf1=^L, kcuu1=^K,
lines#24, mir, cuf1=^L,
rmso=\EG0, smso=\EG1, cuu1=^K, smul=\EG1, rmul=\EG0,
adm2|lsi adm2,
cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EE, am, cub1=^H, ed=\EY, el=\ET,
clear=\E;, cup=\E=%p1%' '%+%c%p2%' '%+%c, cols#80, dch1=\EW, dl1=\ER,
home=^^, ich1=\EQ, kcud1=^J, khome=^^, kcub1=^H, kcuf1=^L, kcuu1=^K,
lines#24, cuf1=^L, cuu1=^K,
adm3|lsi adm3,
cr=^M, cud1=^J, ind=^J, bel=^G,
am, cub1=^H, clear=^Z, lines#24, cols#80,
adm42|42|lsi adm42,
cvvis=\EC\E3 \E3(, cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EE$<270>,
am, cub1=^H, ed=\EY, el=\ET, clear=\E;, cup=\E=%p1%' '%+%c%p2%' '%+%c,
cols#80, dch1=\EW, dl1=\ER, rmir=\Er, smir=\Eq, ip=$<6*>, lines#24,
cbt=\EI, cuf1=^L, rmso=\EG0, smso=\EG4, ht=\t, cuu1=^k,
pad=\177,
adm5|lsi adm5,
cr=^M, cud1=^J, ind=^J, bel=^G,
ed=\EY, el=\ET, cud1=^J, kbs=^H, khome=^^,
rmso=\EG, xmc#1, smso=\EG, use=adm3aplus,
adm3a|3a|lsi adm3a,
cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H,
cup=\E=%p1%' '%+%c%p2%' '%+%c, clear=^Z$<1>,
cols#80, home=^^, lines#24, cuf1=^L, cuu1=^K,
adm3a+|3a+|adm3aplus|lsi adm3a+,
kcub1=^H, kcud1=^J, kcuu1=^K, kcuf1=^L, use=adm3a,
oadm31|o31|old adm31,
smso=\EG4, smul@, rmul@, use=adm31,
//go.sysin dd *
echo 'x - =data/microterm'
sed 's/^X//' <<'//go.sysin dd *' >=data/microterm
# # --------------------------------
# @(#)microterm 1.4 5/19/82
#
# microterm: MICROTERM
#
microterm|act4|microterm act iv,
cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, ed=^_, el=^^, clear=^L,
cup=^T%p1%c%p2%c, cols#80, lines#24, cuf1=^X, cuu1=^Z, home=^],
# The padding on cuf1 for act5 and mime is a guess and not final.
# The act5 has hardware tabs, but in cols 8, 16, 24, 32, 41 (!), 49, ...
microterm5|act5|microterm act v,
uc=\EA, ri=\EH$<3>, kcuu1=^Z, kcud1=^K, kcub1=^H, kcuf1=^X, use=act4,
# Act V in split screen mode. act5s is not tested and said not to work.
# Could have been because of the funny tabs - it might work now.
act5s|skinny act5,
smcup=\EP, rmcup=\EQ, lines#48, cols#39, use=act5,
# These mime1 entries refer to the Microterm Mime I or Mime II.
# The default mime is assumed to be in enhanced act iv mode.
# There is a ^Q in is2 to unwedge any lines that wedge on ^S.
mime|mime1|mime2|mimei|mimeii|microterm mime1,
cup=^T%p1%{24}%+%c%p2%?%p2%{32}%>%t%{48}%+%;%{80}%+%c, cols#80,
cr=^M, cud1=^J, ind=^J, bel=^G, il1=^A$<80>, am, cub1=^H,
ed=^_, el=^^, clear=\035^C, dl1=^W$<80>, ht=^I, lines#24,
cuf1=^X, uc=^U, cuu1=^z, home=\035, cud1=^K, is2=\E^S^Q,
kcuu1=^Z, kcud1=^K, kcub1=^H, kcuf1=^X, ri=^R$<3>, vt#9,
mime-3a|mime-adm3a|mime1 emulating adm3a,
am@, kcuu1=^Z, kcud1=^K, kcub1=^H, kcuf1=^X, use=adm3a,
mime-3ax|mime-adm3ax|mime1 emulating enhanced adm3a,
il1=^A$<80>, dl1=^W$<80>, ht=^I$<3>, el=^X, ed=^_, use=mime-3a,
# Mimes using brightness for standout. Half bright is very dim unless
# you turn up the brightness so far that lines show up on the screen.
mime-fb|full bright mime1,
smso=^Y, rmso=^S, is2=^S\E^Q, use=mime,
mime-hb|half bright mime1,
smso=^S, rmso=^Y, is2=^Y\E, use=mime,
# These entries (for mime 2a) put the terminal in low intensity mode
# since high intensity mode is so obnoxious.
# This is the preferred mode (but ^X can't be used as a kill character (?))
mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
cr=^M, cud1=^J, ind=^J, bel=^G, il1=^A$<20*>, cub1=^H, ed=\EQ$<20*>,
cols#80, el=\EP, clear=\EL, cup=\EY%p1%' '%+%c%p2%' '%+%c, is2=^Y,
dch1=^N, dl1=^W$<20*>, ip=$<2>, rmir=^Z, home=\EH, smir=^O, cuu1=\EA,
ri=\EA, kcud1=\EB, kcub1=\ED, kcuf1=\EC, kcuu1=\EA, lines#24,
cuf1=\EC, ht=^I, rmso=\E9, smso=\E8, smul=\E4, rmul=\E5,
mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
cr=^M, cud1=^J, ind=^J, bel=^G, il1=^A$<20*>, am, cub1=^H, ed=\EJ$<20*>,
el=\EK, clear=\EL, cup=\E=%p1%' '%+%c%p2%' '%+%c, cols#80, dch1=\ED,
dl1=^W$<20*>, kcub1=^H, kcuf1=^L, kcuu1=^K, kcud1=^J, home=^^, is2=\E),
ri=\EI, smir=\EE, rmir=^Z, ip=$<2>, lines#24, cuf1=^L, cuu1=\EI,
smso=\E:, rmso=\E;, smul=\E6, rmul=\E7,
//go.sysin dd *
exit
More information about the Mod.sources
mailing list