7300 gnu x compile
Greg Lee
lee at uhccux.uhcc.hawaii.edu
Wed Jul 6 08:02:43 AEST 1988
These are diffs to use Gnu-cc (v 1.23) as a cross-compiler on an Ultrix 2.2
system to compile to assembler code for a 7300 system. My little
7300 with only 512k of ram takes a real long time to do compiles. Maybe
others in that situation have access to a larger bsd system, and so
this might be of use.
I don't have a lot of experience with this yet -- it's worked ok for
the few things I've tried. There may be some things wrong with the
sdb support -- I don't know anything about sdb. (I've got v 3.51 with
3.50 development set.)
This only works using the -S flag, since I don't have a
cross-assembler or loader. Yet.
If you decide to try this, you'd have to upload the 7300 include
files to your big machine. I've got them in $HOME/include73.
The diffs file ought to be edited to replace your $HOME path
for mine (/uh5h/ling/lee). The 7300 files syms.h and storclass.h
are also required for compiling the cross compiler (the #sccs
directives need to be commented out).
Before doing the make, you'll need to:
ln -s config-3b1.h config.h
ln -s tm-3b1.h tm.h
ln -s output-m68k.c aux-output.c
ln -s m68k.md md
Greg Lee, lee at uhccux.uhcc.hawaii.edu
#! /bin/sh
# This is a shell archive. Remove anything before this line, then unpack
# it by saving it into a file and typing "sh file". To overwrite existing
# files, type "sh file -c". You can also feed this as standard input via
# unshar, or by typing "sh <file", e.g.. If this archive is complete, you
# will see the following message at the end:
# "End of archive 1 (of 1)."
# Contents: Changenotes Makefile x7300-diffs
# Wrapped by lee at uhccux on Tue Jul 5 11:25:35 1988
PATH=/bin:/usr/bin:/usr/ucb ; export PATH
if test -f 'Changenotes' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'Changenotes'\"
else
echo shar: Extracting \"'Changenotes'\" \(1046 characters\)
sed "s/^X//" >'Changenotes' <<'END_OF_FILE'
XChanges in gcc-1.23 to make 7300 cross-compiler for Utrix 2.2
X
XTue Jul 5 08:59:50 GMT-10:00 1988, Greg Lee (lee at uhccux.uhcc.hawaii.edu)
X
Xnew Makefile
X x is prefixed to names of programs: xgcc, xcpp, xcc1
X no gnulib, since only compilation done -- no assembly or linking
X installation in my own home directory (/uh5h/ling/lee/...)
X
Xgcc.c
X look for gnu-xcc1 etc. in my own lib
X preprocessor symbol USG -> HOST_USG (which is not defined)
X
Xcccp.c
X look for system include files in my directory: /uh5h/ling/lee/include73
X preprocessor symbol USG -> HOST_USG
X
Xtoplev.c
X preprocessor symbol USG -> HOST_USG
X
Xtm-3b1.h
X added: #define SDB_DEBUGGING_INFO
X
Xfinal.c
X fixed mistaken call of ASM_OUTPUT_CASE_END
X write "file" directive for sdb when go to new file (don't know
X if this is right)
X
Xsdbout.c
X write "file" directive in sdbout_init
X remove initial "." from sdb directives
X change "." to "~" in sdb names
X include of syms.h made local (doesn't exist in ultrix)
X
Xstorclass.h
Xsyms.h
X imported from 7300, with initial #sccs directives commented out
X
END_OF_FILE
if test 1046 -ne `wc -c <'Changenotes'`; then
echo shar: \"'Changenotes'\" unpacked with wrong size!
fi
# end of 'Changenotes'
fi
if test -f 'Makefile' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'Makefile'\"
else
echo shar: Extracting \"'Makefile'\" \(11602 characters\)
sed "s/^X//" >'Makefile' <<'END_OF_FILE'
X# Makefile for GNU C compiler.
X# Copyright (C) 1987 Free Software Foundation, Inc.
X
X#This file is part of GNU CC.
X
X#GNU CC is distributed in the hope that it will be useful,
X#but WITHOUT ANY WARRANTY. No author or distributor
X#accepts responsibility to anyone for the consequences of using it
X#or for whether it serves any particular purpose or works at all,
X#unless he says so in writing. Refer to the GNU CC General Public
X#License for full details.
X
X#Everyone is granted permission to copy, modify and redistribute
X#GNU CC, but only under the conditions described in the
X#GNU CC General Public License. A copy of this license is
X#supposed to have been given to you along with GNU CC so you
X#can know your rights and responsibilities. It should be in a
X#file named COPYING. Among other things, the copyright notice
X#and this notice must be preserved on all copies.
X
X
XCFLAGS = -g -O
XCC = gcc
X# OLDCC should not be the GNU C compiler.
XOLDCC = cc
XBISON = bison
XAR = ar
XSHELL = /bin/sh
X
Xbindir = /uh5h/ling/lee/bin
Xlibdir = /uh5h/ling/lee/lib
X
X# These are what you would need on HPUX:
X# CFLAGS = -Wc,-Ns2000 -Wc,-Ne700
X# -g is desirable in CFLAGS, but a compiler bug in HPUX version 5
X# bites whenever tree.def, rtl.def or machmode.def is included
X# (ie., on every source file).
X# CCLIBFLAGS = -Wc,-Ns2000 -Wc,-Ne700
X# For CCLIBFLAGS you might want to specify the switch that
X# forces only 68000 instructions to be used.
X
X# If you are making gcc for the first time, and if you are compiling it with
X# a non-gcc compiler, and if your system doesn't have a working alloca() in any
X# of the standard libraries (as is true for HP/UX), then get alloca.c from
X# GNU Emacs and un-comment the following line:
X# CLIB = alloca.o
X
X# If your system has alloca() in /lib/libPW.a, un-comment the following line:
X# CLIB= -lc -lPW
X
X# For System V based systems, you will also have to comment out the `ranlib'
X# command below.
X
X# How to link with obstack
XOBSTACK=obstack.o
X# Dependency on obstack
XOBSTACK1=obstack.o
X
XLIBS = $(OBSTACK) $(CLIB)
XDIR = ../gcc
X
XOBJS = toplev.o version.o parse.tab.o tree.o print-tree.o \
X decl.o typecheck.o stor-layout.o fold-const.o \
X rtl.o expr.o stmt.o expmed.o explow.o optabs.o varasm.o \
X symout.o dbxout.o sdbout.o emit-rtl.o insn-emit.o \
X integrate.o jump.o cse.o loop.o flow.o stupid.o combine.o \
X regclass.o local-alloc.o global-alloc.o reload.o reload1.o insn-peep.o \
X final.o recog.o insn-recog.o insn-extract.o insn-output.o
X
X# Files to be copied away after each stage in building.
XSTAGE_GCC=gcc
XSTAGESTUFF = *.o insn-flags.h insn-config.h insn-codes.h \
X insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
X genemit genoutput genrecog genextract genflags gencodes genconfig genpeep \
X cc1 cpp cccp
X
X# Members of gnulib.
XLIBFUNCS = _eprintf \
X _umulsi3 _mulsi3 _udivsi3 _divsi3 _umodsi3 _modsi3 \
X _lshrsi3 _lshlsi3 _ashrsi3 _ashlsi3 \
X _divdf3 _muldf3 _negdf2 _adddf3 _subdf3 _cmpdf2 \
X _fixunsdfsi _fixunsdfdi _fixdfsi _fixdfdi \
X _floatsidf _floatdidf _truncdfsf2 _extendsfdf2 \
X _addsf3 _negsf2 _subsf3 _cmpsf2 _mulsf3 _divsf3
X
X# If you want to recompile everything, just do rm *.o.
X# CONFIG_H = config.h tm.h
XCONFIG_H =
XRTL_H = rtl.h rtl.def machmode.def
XTREE_H = tree.h tree.def machmode.def
X
Xall: xgcc xcc1 xcpp
X
Xdoc: cpp.info internals
X
Xcompilations: ${OBJS}
X
Xxgcc: gcc.o version.o $(OBSTACK1)
X $(CC) $(CFLAGS) -o gccnew gcc.o version.o $(LIBS)
X# Go via `gccnew' to avoid `file busy' if $(CC) is `gcc'.
X mv gccnew xgcc
X
Xgcc.o: gcc.c $(CONFIG_H)
X $(CC) $(CFLAGS) -c -DSTANDARD_EXEC_PREFIX=\"$(libdir)/gcc-\" gcc.c
X
Xxcc1: $(OBJS) $(OBSTACK1)
X $(CC) $(CFLAGS) -o xcc1 $(OBJS) $(LIBS)
X
X#Library of arithmetic subroutines
X# Don't compile this with gcc!
Xgnulib: gnulib.c
X -mkdir libtemp
X cd libtemp; \
X rm -f gnulib; \
X for name in $(LIBFUNCS); \
X do \
X echo $${name}; \
X rm -f $${name}.c; \
X ln ../gnulib.c $${name}.c; \
X $(OLDCC) $(CCLIBFLAGS) -O -I.. -c -DL$${name} $${name}.c; \
X $(AR) qc gnulib $${name}.o; \
X done
X mv libtemp/gnulib .
X rm -rf libtemp
X if [ -f /usr/bin/ranlib ] ; then ranlib gnulib ;fi
X# On HPUX, if you are working with the GNU assembler and linker,
X# the previous line must be replaced with
X# No change is needed here if you are using the HPUX assembler and linker.
X# mv gnulib gnulib-hp
X# hpxt gnulib-hp gnulib
X
Xdecl.o : decl.c $(CONFIG_H) $(TREE_H) flags.h c-tree.h parse.h
Xtypecheck.o : typecheck.c $(CONFIG_H) $(TREE_H) c-tree.h flags.h
Xtree.o : tree.c $(CONFIG_H) $(TREE_H)
Xprint-tree.o : print-tree.c $(CONFIG_H) $(TREE_H)
Xstor-layout.o : stor-layout.c $(CONFIG_H) $(TREE_H)
Xfold-const.o : fold-const.c $(CONFIG_H) $(TREE_H)
Xtoplev.o : toplev.c $(CONFIG_H) $(TREE_H) flags.h
X
Xparse.tab.o : parse.tab.c $(CONFIG_H) $(TREE_H) parse.h c-tree.h flags.h
X
Xparse.tab.c : parse.y
X $(BISON) -v parse.y
X
Xrtl.o : rtl.c $(CONFIG_H) $(RTL_H)
X
Xvarasm.o : varasm.c $(CONFIG_H) $(TREE_H) $(RTL_H) flags.h expr.h
Xstmt.o : stmt.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
X insn-flags.h expr.h insn-config.h regs.h
Xexpr.o : expr.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
X insn-flags.h insn-codes.h expr.h insn-config.h recog.h
Xexpmed.o : expmed.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
X insn-flags.h insn-codes.h expr.h insn-config.h recog.h
Xexplow.o : explow.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h expr.h
Xoptabs.o : optabs.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
X insn-flags.h insn-codes.h expr.h insn-config.h recog.h
Xsymout.o : symout.c $(CONFIG_H) $(TREE_H) $(RTL_H) symseg.h gdbfiles.h
Xdbxout.o : dbxout.c $(CONFIG_H) $(TREE_H) $(RTL_H)
Xsdbout.o : sdbout.c $(CONFIG_H) $(TREE_H) $(RTL_H) c-tree.h
X
Xemit-rtl.o : emit-rtl.c $(CONFIG_H) $(RTL_H) regs.h insn-config.h
X
Xintegrate.o : integrate.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h expr.h insn-flags.h
X
Xjump.o : jump.c $(CONFIG_H) $(RTL_H) flags.h regs.h
Xstupid.o : stupid.c $(CONFIG_H) $(RTL_H) regs.h hard-reg-set.h
X
Xcse.o : cse.c $(CONFIG_H) $(RTL_H) insn-config.h regs.h hard-reg-set.h
Xloop.o : loop.c $(CONFIG_H) $(RTL_H) insn-config.h regs.h recog.h
Xflow.o : flow.c $(CONFIG_H) $(RTL_H) basic-block.h regs.h hard-reg-set.h
Xcombine.o : combine.c $(CONFIG_H) $(RTL_H) flags.h \
X insn-config.h regs.h basic-block.h recog.h
Xregclass.o : regclass.c $(CONFIG_H) $(RTL_H) flags.h regs.h \
X insn-config.h recog.h hard-reg-set.h
Xlocal-alloc.o : local-alloc.c $(CONFIG_H) $(RTL_H) basic-block.h regs.h \
X insn-config.h recog.h hard-reg-set.h
Xglobal-alloc.o : global-alloc.c $(CONFIG_H) $(RTL_H) flags.h \
X basic-block.h regs.h hard-reg-set.h insn-config.h
X
Xreload.o : reload.c $(CONFIG_H) $(RTL_H) \
X reload.h recog.h hard-reg-set.h insn-config.h regs.h
Xreload1.o : reload1.c $(CONFIG_H) $(RTL_H) flags.h \
X reload.h regs.h hard-reg-set.h insn-config.h basic-block.h
Xfinal.o : final.c $(CONFIG_H) $(RTL_H) regs.h recog.h conditions.h gdbfiles.h
Xrecog.o : recog.c $(CONFIG_H) $(RTL_H) \
X regs.h recog.h hard-reg-set.h insn-config.h
X
X# Now the source files that are generated from the machine description.
X
X.PRECIOUS: insn-config.h insn-flags.h insn-codes.h \
X insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c
X
Xinsn-config.h : md genconfig
X ./genconfig md > tmp-insn-config.h
X ./move-if-change tmp-insn-config.h insn-config.h
X
Xinsn-flags.h : md genflags
X ./genflags md > tmp-insn-flags.h
X ./move-if-change tmp-insn-flags.h insn-flags.h
X
Xinsn-codes.h : md gencodes
X ./gencodes md > tmp-insn-codes.h
X ./move-if-change tmp-insn-codes.h insn-codes.h
X
Xinsn-emit.o : insn-emit.c $(CONFIG_H) $(RTL_H) expr.h insn-config.h
X $(CC) $(CFLAGS) -c insn-emit.c
X
Xinsn-emit.c : md genemit
X ./genemit md > tmp-insn-emit.c
X ./move-if-change tmp-insn-emit.c insn-emit.c
X
Xinsn-recog.o : insn-recog.c $(CONFIG_H) $(RTL_H) insn-config.h
X $(CC) $(CFLAGS) -c insn-recog.c
X
Xinsn-recog.c : md genrecog
X ./genrecog md > tmp-insn-recog.c
X ./move-if-change tmp-insn-recog.c insn-recog.c
X
Xinsn-extract.o : insn-extract.c $(RTL_H)
X $(CC) $(CFLAGS) -c insn-extract.c
X
Xinsn-extract.c : md genextract
X ./genextract md > tmp-insn-extract.c
X ./move-if-change tmp-insn-extract.c insn-extract.c
X
Xinsn-peep.o : insn-peep.c $(CONFIG_H) $(RTL_H) regs.h
X $(CC) $(CFLAGS) -c insn-peep.c
X
Xinsn-peep.c : md genpeep
X ./genpeep md > tmp-insn-peep.c
X ./move-if-change tmp-insn-peep.c insn-peep.c
X
Xinsn-output.o : insn-output.c $(CONFIG_H) $(RTL_H) regs.h insn-config.h insn-flags.h conditions.h output.h aux-output.c
X $(CC) $(CFLAGS) -c insn-output.c
X
Xinsn-output.c : md genoutput
X ./genoutput md > tmp-insn-output.c
X ./move-if-change tmp-insn-output.c insn-output.c
X
X# Now the programs that generate those files.
X
Xgenconfig : genconfig.o rtl.o $(OBSTACK1)
X $(CC) $(CFLAGS) -o genconfig genconfig.o rtl.o $(LIBS)
X
Xgenconfig.o : genconfig.c $(RTL_H)
X $(CC) $(CFLAGS) -c genconfig.c
X
Xgenflags : genflags.o rtl.o $(OBSTACK1)
X $(CC) $(CFLAGS) -o genflags genflags.o rtl.o $(LIBS)
X
Xgenflags.o : genflags.c $(RTL_H)
X $(CC) $(CFLAGS) -c genflags.c
X
Xgencodes : gencodes.o rtl.o $(OBSTACK1)
X $(CC) $(CFLAGS) -o gencodes gencodes.o rtl.o $(LIBS)
X
Xgencodes.o : gencodes.c $(RTL_H)
X $(CC) $(CFLAGS) -c gencodes.c
X
Xgenemit : genemit.o rtl.o $(OBSTACK1)
X $(CC) $(CFLAGS) -o genemit genemit.o rtl.o $(LIBS)
X
Xgenemit.o : genemit.c $(RTL_H)
X $(CC) $(CFLAGS) -c genemit.c
X
Xgenrecog : genrecog.o rtl.o $(OBSTACK1)
X $(CC) $(CFLAGS) -o genrecog genrecog.o rtl.o $(LIBS)
X
Xgenrecog.o : genrecog.c $(RTL_H)
X $(CC) $(CFLAGS) -c genrecog.c
X
Xgenextract : genextract.o rtl.o $(OBSTACK1)
X $(CC) $(CFLAGS) -o genextract genextract.o rtl.o $(LIBS)
X
Xgenextract.o : genextract.c $(RTL_H)
X $(CC) $(CFLAGS) -c genextract.c
X
Xgenpeep : genpeep.o rtl.o $(OBSTACK1)
X $(CC) $(CFLAGS) -o genpeep genpeep.o rtl.o $(LIBS)
X
Xgenpeep.o : genpeep.c $(RTL_H)
X $(CC) $(CFLAGS) -c genpeep.c
X
Xgenoutput : genoutput.o rtl.o $(OBSTACK1)
X $(CC) $(CFLAGS) -o genoutput genoutput.o rtl.o $(LIBS)
X
Xgenoutput.o : genoutput.c $(RTL_H)
X $(CC) $(CFLAGS) -c genoutput.c
X
X# Making the preprocessor
Xxcpp: cccp
X -rm -f xcpp
X ln cccp xcpp
Xcccp: cccp.o cexp.o version.o
X $(CC) $(CFLAGS) -o cccp cccp.o cexp.o version.o $(CLIB)
Xcexp.o: cexp.c
Xcexp.c: cexp.y
X $(BISON) cexp.y
X mv cexp.tab.c cexp.c
Xcccp.o: cccp.c
X
Xcpp.info: cpp.texinfo
X makeinfo $<
X
Xinternals: internals.texinfo
X makeinfo $<
X
X# gnulib is not deleted because deleting it would be inconvenient
X# for most uses of this target.
Xclean:
X -rm -f $(STAGESTUFF) $(STAGE_GCC)
X -rm -f *.s *.s[0-9] *.co *.greg *.lreg *.combine *.flow *.cse *.jump *.rtl *.tree *.loop
X -rm -f core
X
X# Copy the files into directories where they will be run.
Xinstall: all
X install xcc1 $(libdir)/gcc-xcc1
X# install -c -m 755 gnulib $(libdir)/gcc-gnulib
X# if [ -f /usr/bin/ranlib ] ; then ranlib $(libdir)/gcc-gnulib ;fi
X install xcpp $(libdir)/gcc-xcpp
X install xgcc $(bindir)
X
X# do make -f ../gcc/Makefile maketest DIR=../gcc
X# in the intended test directory to make it a suitable test directory.
Xmaketest:
X ln -s $(DIR)/*.[chy] .
X ln -s $(DIR)/*.def .
X ln -s $(DIR)/*.md .
X ln -s $(DIR)/.gdbinit .
X -ln -s $(DIR)/bison.simple .
X ln -s $(DIR)/gcc .
X ln -s $(DIR)/move-if-change .
X ln -s $(DIR)/Makefile test-Makefile
X -rm tm.h aux-output.c
X make -f test-Makefile clean
X# You must create the necessary links tm.h, md and aux-output.c
X
X# Copy the object files from a particular stage into a subdirectory.
Xstage1: force
X -mkdir stage1
X mv $(STAGESTUFF) $(STAGE_GCC) stage1
X ln gnulib stage1
X
Xstage2: force
X -mkdir stage2
X mv $(STAGESTUFF) $(STAGE_GCC) stage2
X ln gnulib stage2
X
Xstage3: force
X -mkdir stage3
X mv $(STAGESTUFF) $(STAGE_GCC) stage3
X ln gnulib stage3
X
X.PHONY: stage1 stage2 stage3 #In GNU Make, ignore whether `stage*' exists.
Xforce:
X
XTAGS: force
X etags *.y *.h *.c
X.PHONY: TAGS
END_OF_FILE
if test 11602 -ne `wc -c <'Makefile'`; then
echo shar: \"'Makefile'\" unpacked with wrong size!
fi
# end of 'Makefile'
fi
if test -f 'x7300-diffs' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'x7300-diffs'\"
else
echo shar: Extracting \"'x7300-diffs'\" \(18897 characters\)
sed "s/^X//" >'x7300-diffs' <<'END_OF_FILE'
X*** ../gcc-1.23/cccp.c Thu Jun 30 05:48:51 1988
X--- cccp.c Tue Jul 5 07:26:30 1988
X***************
X*** 167,173
X
X int do_define (), do_line (), do_include (), do_undef (), do_error (),
X do_pragma (), do_if (), do_xifdef (), do_else (),
X! do_elif (), do_endif (), do_sccs ();
X
X struct hashnode *install ();
X struct hashnode *lookup ();
X
X--- 167,173 -----
X
X int do_define (), do_line (), do_include (), do_undef (), do_error (),
X do_pragma (), do_if (), do_xifdef (), do_else (),
X! do_elif (), do_endif (), do_sccs (), do_ident ();
X
X struct hashnode *install ();
X struct hashnode *lookup ();
X***************
X*** 204,210
X /* Current maximum length of directory names in the search path
X for include files. (Altered as we get more of them.) */
X
X! int max_include_len = sizeof("/usr/local/lib/gcc-include");
X
X /* Nonzero means copy comments into the output file. */
X
X
X--- 204,210 -----
X /* Current maximum length of directory names in the search path
X for include files. (Altered as we get more of them.) */
X
X! int max_include_len = sizeof("/uh5h/ling/lee/include73/gcc-include");
X
X /* Nonzero means copy comments into the output file. */
X
X***************
X*** 309,315
X #ifndef VMS
X #ifdef CPLUSPLUS
X /* Pick up GNU C++ specific include files. */
X! { &include_defaults[1], "/usr/local/lib/g++-include" },
X /* Borrow AT&T C++ head files, if available. */
X { &include_defaults[2], "/usr/include/CC" },
X /* Use GNU CC specific header files. */
X
X--- 309,315 -----
X #ifndef VMS
X #ifdef CPLUSPLUS
X /* Pick up GNU C++ specific include files. */
X! { &include_defaults[1], "/uh5h/ling/lee/include73/g++-include" },
X /* Borrow AT&T C++ head files, if available. */
X { &include_defaults[2], "/usr/include/CC" },
X /* Use GNU CC specific header files. */
X***************
X*** 313,319
X /* Borrow AT&T C++ head files, if available. */
X { &include_defaults[2], "/usr/include/CC" },
X /* Use GNU CC specific header files. */
X! { &include_defaults[3], "/usr/local/lib/gcc-include" },
X #else
X { &include_defaults[1], "/usr/local/lib/gcc-include" },
X #endif
X
X--- 313,319 -----
X /* Borrow AT&T C++ head files, if available. */
X { &include_defaults[2], "/usr/include/CC" },
X /* Use GNU CC specific header files. */
X! { &include_defaults[3], "/uh5h/ling/lee/include73/gcc-include" },
X #else
X { &include_defaults[1], "/uh5h/ling/lee/include73/gcc-include" },
X #endif
X***************
X*** 315,321
X /* Use GNU CC specific header files. */
X { &include_defaults[3], "/usr/local/lib/gcc-include" },
X #else
X! { &include_defaults[1], "/usr/local/lib/gcc-include" },
X #endif
X { 0, "/usr/include" }
X #else
X
X--- 315,321 -----
X /* Use GNU CC specific header files. */
X { &include_defaults[3], "/uh5h/ling/lee/include73/gcc-include" },
X #else
X! { &include_defaults[1], "/uh5h/ling/lee/include73/gcc-include" },
X #endif
X { 0, "/uh5h/ling/lee/include73" }
X #else
X***************
X*** 317,323
X #else
X { &include_defaults[1], "/usr/local/lib/gcc-include" },
X #endif
X! { 0, "/usr/include" }
X #else
X { &include_defaults[1], "GNU_CC_INCLUDE:" }, /* GNU includes */
X { &include_defaults[2], "SYS$SYSROOT:[SYSLIB.]" }, /* VAX-11 "C" includes */
X
X--- 317,323 -----
X #else
X { &include_defaults[1], "/uh5h/ling/lee/include73/gcc-include" },
X #endif
X! { 0, "/uh5h/ling/lee/include73" }
X #else
X { &include_defaults[1], "GNU_CC_INCLUDE:" }, /* GNU includes */
X { &include_defaults[2], "SYS$SYSROOT:[SYSLIB.]" }, /* VAX-11 "C" includes */
X*** ../gcc-1.23/final.c Thu Jun 30 05:49:05 1988
X--- final.c Tue Jul 5 08:03:51 1988
X***************
X*** 523,529
X CODE_LABEL_NUMBER (XEXP (XVECEXP (body, 1, idx), 0)),
X CODE_LABEL_NUMBER (XEXP (XEXP (body, 0), 0)));
X #ifdef ASM_OUTPUT_CASE_END
X! ASM_OUTPUT_CASE_END (file, CODE_LABEL_NUMBER (PREV_INSN (insn)));
X #endif
X break;
X }
X
X--- 523,531 -----
X CODE_LABEL_NUMBER (XEXP (XVECEXP (body, 1, idx), 0)),
X CODE_LABEL_NUMBER (XEXP (XEXP (body, 0), 0)));
X #ifdef ASM_OUTPUT_CASE_END
X! ASM_OUTPUT_CASE_END (file,
X! CODE_LABEL_NUMBER (PREV_INSN (insn)),
X! insn);
X #endif
X break;
X }
X***************
X*** 733,738
X #ifdef SDB_DEBUGGING_INFO
X if (write_symbols == SDB_DEBUG)
X {
X #ifdef ASM_OUTPUT_SOURCE_LINE
X ASM_OUTPUT_SOURCE_LINE (file, last_linenum);
X #else
X
X--- 735,751 -----
X #ifdef SDB_DEBUGGING_INFO
X if (write_symbols == SDB_DEBUG)
X {
X+
X+ if (filename && (lastfile == 0 || strcmp (filename, lastfile)))
X+ {
X+ #ifdef ASM_OUTPUT_SOURCE_FILENAME
X+ ASM_OUTPUT_SOURCE_FILENAME (file, filename);
X+ #else
X+ fprintf (file, "\tfile\t\"%s\"\n", filename);
X+ #endif
X+ lastfile = filename;
X+ }
X+
X #ifdef ASM_OUTPUT_SOURCE_LINE
X ASM_OUTPUT_SOURCE_LINE (file, last_linenum);
X #else
X*** ../gcc-1.23/gcc.c Thu Jun 30 05:49:09 1988
X--- gcc.c Mon Jul 4 06:10:26 1988
X***************
X*** 119,125
X #include "obstack.h"
X #include "config.h"
X
X! #ifdef USG
X #define R_OK 4
X #define W_OK 2
X #define X_OK 1
X
X--- 119,125 -----
X #include "obstack.h"
X #include "config.h"
X
X! #ifdef HOST_USG
X #define R_OK 4
X #define W_OK 2
X #define X_OK 1
X***************
X*** 199,205
X struct compiler compilers[] =
X {
X {".c",
X! "cpp %{nostdinc} %{C} %{v} %{D*} %{U*} %{I*} %{M*} %{T} \
X -undef -D__GNU__ -D__GNUC__ %{ansi:-T -$ -D__STRICT_ANSI__} %{!ansi:%p}\
X %c %{O:-D__OPTIMIZE__} %{traditional} %{pedantic}\
X %{Wcomment} %{Wtrigraphs} %{Wall} %C\
X
X--- 199,205 -----
X struct compiler compilers[] =
X {
X {".c",
X! "xcpp %{nostdinc} %{C} %{v} %{D*} %{U*} %{I*} %{M*} %{T} \
X -undef -D__GNU__ -D__GNUC__ %{ansi:-T -$ -D__STRICT_ANSI__} %{!ansi:%p}\
X %c %{O:-D__OPTIMIZE__} %{traditional} %{pedantic}\
X %{Wcomment} %{Wtrigraphs} %{Wall} %C\
X***************
X*** 203,210
X -undef -D__GNU__ -D__GNUC__ %{ansi:-T -$ -D__STRICT_ANSI__} %{!ansi:%p}\
X %c %{O:-D__OPTIMIZE__} %{traditional} %{pedantic}\
X %{Wcomment} %{Wtrigraphs} %{Wall} %C\
X! %i %{!M*:%{!E:%g.cpp}}%{E:%{o*}}%{M*:%{o*}}\n\
X! %{!M*:%{!E:cc1 %g.cpp %{!Q:-quiet} -dumpbase %i %{Y*} %{d*} %{m*} %{f*}\
X %{g} %{O} %{W*} %{w} %{pedantic} %{ansi} %{traditional}\
X %{v:-version} %{gg:-symout %g.sym} %{pg:-p} %{p}\
X %{S:%{o*}%{!o*:-o %b.s}}%{!S:-o %g.s}\n\
X
X--- 203,210 -----
X -undef -D__GNU__ -D__GNUC__ %{ansi:-T -$ -D__STRICT_ANSI__} %{!ansi:%p}\
X %c %{O:-D__OPTIMIZE__} %{traditional} %{pedantic}\
X %{Wcomment} %{Wtrigraphs} %{Wall} %C\
X! %i %{!M*:%{!E:%g.xcpp}}%{E:%{o*}}%{M*:%{o*}}\n\
X! %{!M*:%{!E:xcc1 %g.xcpp %{!Q:-quiet} -dumpbase %i %{Y*} %{d*} %{m*} %{f*}\
X %{g} %{O} %{W*} %{w} %{pedantic} %{ansi} %{traditional}\
X %{v:-version} %{gg:-symout %g.sym} %{pg:-p} %{p}\
X %{S:%{o*}%{!o*:-o %b.s}}%{!S:-o %g.s}\n\
X***************
X*** 335,341
X /* Default prefixes to attach to command names. */
X
X #ifndef STANDARD_EXEC_PREFIX
X! #define STANDARD_EXEC_PREFIX "/usr/local/lib/gcc-"
X #endif /* !defined STANDARD_EXEC_PREFIX */
X
X char *standard_exec_prefix = STANDARD_EXEC_PREFIX;
X
X--- 335,341 -----
X /* Default prefixes to attach to command names. */
X
X #ifndef STANDARD_EXEC_PREFIX
X! #define STANDARD_EXEC_PREFIX "/uh5h/ling/lee/lib/gcc-"
X #endif /* !defined STANDARD_EXEC_PREFIX */
X
X char *standard_exec_prefix = STANDARD_EXEC_PREFIX;
X***************
X*** 339,345
X #endif /* !defined STANDARD_EXEC_PREFIX */
X
X char *standard_exec_prefix = STANDARD_EXEC_PREFIX;
X! char *standard_exec_prefix_1 = "/usr/lib/gcc-";
X
X char *standard_startfile_prefix = "/lib/";
X char *standard_startfile_prefix_1 = "/usr/lib/";
X
X--- 339,345 -----
X #endif /* !defined STANDARD_EXEC_PREFIX */
X
X char *standard_exec_prefix = STANDARD_EXEC_PREFIX;
X! char *standard_exec_prefix_1 = "/uh5h/ling/lee/lib/gcc-";
X
X char *standard_startfile_prefix = "/uh5h/ling/lee/lib73/";
X char *standard_startfile_prefix_1 = "/uh5h/ling/lee/lib73/";
X***************
X*** 341,348
X char *standard_exec_prefix = STANDARD_EXEC_PREFIX;
X char *standard_exec_prefix_1 = "/usr/lib/gcc-";
X
X! char *standard_startfile_prefix = "/lib/";
X! char *standard_startfile_prefix_1 = "/usr/lib/";
X
X /* Clear out the vector of arguments (after a command is executed). */
X
X
X--- 341,348 -----
X char *standard_exec_prefix = STANDARD_EXEC_PREFIX;
X char *standard_exec_prefix_1 = "/uh5h/ling/lee/lib/gcc-";
X
X! char *standard_startfile_prefix = "/uh5h/ling/lee/lib73/";
X! char *standard_startfile_prefix_1 = "/uh5h/ling/lee/lib73/";
X
X /* Clear out the vector of arguments (after a command is executed). */
X
X***************
X*** 441,447
X #endif /* DEBUG */
X }
X
X! #ifdef USG
X pid = fork ();
X if (pid < 0)
X pfatal_with_name ("fork");
X
X--- 441,447 -----
X #endif /* DEBUG */
X }
X
X! #ifdef HOST_USG
X pid = fork ();
X if (pid < 0)
X pfatal_with_name ("fork");
X*** ../gcc-1.23/sdbout.c Thu Jun 30 05:49:35 1988
X--- sdbout.c Tue Jul 5 08:24:36 1988
X***************
X*** 27,33
X #include "rtl.h"
X #include "c-tree.h"
X #include <stdio.h>
X! #include <syms.h>
X /* #include <storclass.h> used to be this instead of syms.h. */
X
X /* Line number of beginning of current function, minus one. */
X
X--- 27,33 -----
X #include "rtl.h"
X #include "c-tree.h"
X #include <stdio.h>
X! #include "syms.h"
X /* #include <storclass.h> used to be this instead of syms.h. */
X
X /* Line number of beginning of current function, minus one. */
X***************
X*** 55,62
X /* Put something here if lines get too long */
X #define CONTIN
X
X! #define PUT_SDB_SCL(a) fprintf(asm_out_file, "\t.scl\t%d;", (a))
X! #define PUT_SDB_INT_VAL(a) fprintf (asm_out_file, "\t.val\t%d;", (a))
X #define PUT_SDB_VAL(a) \
X ( fputs (".val\t", asm_out_file), \
X output_addr_const (asm_out_file, (a)), \
X
X--- 55,62 -----
X /* Put something here if lines get too long */
X #define CONTIN
X
X! #define PUT_SDB_SCL(a) fprintf(asm_out_file, "\tscl\t%d;", (a))
X! #define PUT_SDB_INT_VAL(a) fprintf (asm_out_file, "\tval\t%d;", (a))
X #define PUT_SDB_VAL(a) \
X ( fputs ("\tval\t", asm_out_file), \
X output_addr_const (asm_out_file, (a)), \
X***************
X*** 58,64
X #define PUT_SDB_SCL(a) fprintf(asm_out_file, "\t.scl\t%d;", (a))
X #define PUT_SDB_INT_VAL(a) fprintf (asm_out_file, "\t.val\t%d;", (a))
X #define PUT_SDB_VAL(a) \
X! ( fputs (".val\t", asm_out_file), \
X output_addr_const (asm_out_file, (a)), \
X fputc (';', asm_out_file))
X #define PUT_SDB_DEF(a) fprintf(asm_out_file, "\t.def\t%s;", a)
X
X--- 58,64 -----
X #define PUT_SDB_SCL(a) fprintf(asm_out_file, "\tscl\t%d;", (a))
X #define PUT_SDB_INT_VAL(a) fprintf (asm_out_file, "\tval\t%d;", (a))
X #define PUT_SDB_VAL(a) \
X! ( fputs ("\tval\t", asm_out_file), \
X output_addr_const (asm_out_file, (a)), \
X fputc (';', asm_out_file))
X #define PUT_SDB_DEF(a) fprintf(asm_out_file, "\tdef\t%s;", a)
X***************
X*** 61,71
X ( fputs (".val\t", asm_out_file), \
X output_addr_const (asm_out_file, (a)), \
X fputc (';', asm_out_file))
X! #define PUT_SDB_DEF(a) fprintf(asm_out_file, "\t.def\t%s;", a)
X! #define PUT_SDB_ENDEF fputs("\t.endef\n", asm_out_file)
X! #define PUT_SDB_TYPE(a) fprintf(asm_out_file, "\t.type\t0%o;", a)
X! #define PUT_SDB_TAG(a) fprintf(asm_out_file, "\t.tag\t%s;", a)
X! #define PUT_SDB_SIZE(a) fprintf(asm_out_file, "\t.size\t%d;", a)
X
X /* Return the sdb tag identifier string for TYPE
X if TYPE has already been defined; otherwise return a null pointer. */
X
X--- 61,71 -----
X ( fputs ("\tval\t", asm_out_file), \
X output_addr_const (asm_out_file, (a)), \
X fputc (';', asm_out_file))
X! #define PUT_SDB_DEF(a) fprintf(asm_out_file, "\tdef\t%s;", a)
X! #define PUT_SDB_ENDEF fputs("\tendef\n", asm_out_file)
X! #define PUT_SDB_TYPE(a) fprintf(asm_out_file, "\ttype\t0%o;", a)
X! #define PUT_SDB_TAG(a) fprintf(asm_out_file, "\ttag\t%s;", a)
X! #define PUT_SDB_SIZE(a) fprintf(asm_out_file, "\tsize\t%d;", a)
X
X /* Return the sdb tag identifier string for TYPE
X if TYPE has already been defined; otherwise return a null pointer. */
X***************
X*** 90,95
X FILE *asm_file;
X char *input_file_name;
X {
X /* Get all permanent types not yet gotten
X and output them. */
X
X
X--- 90,100 -----
X FILE *asm_file;
X char *input_file_name;
X {
X+ asm_out_file = asm_file;
X+
X+ fprintf (asm_out_file,
X+ "\tfile\t\"%s\"\n", input_file_name);
X+
X /* Get all permanent types not yet gotten
X and output them. */
X
X***************
X*** 125,131
X {
X char label[10];
X char *labelstr;
X! sprintf (label, ".%dfake", unnamed_struct_number++);
X labelstr = (char *) permalloc (strlen (label) + 1);
X strcpy (labelstr, label);
X return labelstr;
X
X--- 130,136 -----
X {
X char label[10];
X char *labelstr;
X! sprintf (label, "~%dfake", unnamed_struct_number++);
X labelstr = (char *) permalloc (strlen (label) + 1);
X strcpy (labelstr, label);
X return labelstr;
X***************
X*** 543,549
X }
X /* output end of a structure,union, or enumeral definition */
X
X! PUT_SDB_DEF (".eos");
X PUT_SDB_INT_VAL (size);
X PUT_SDB_SCL (C_EOS);
X PUT_SDB_TAG (name);
X
X--- 548,554 -----
X }
X /* output end of a structure,union, or enumeral definition */
X
X! PUT_SDB_DEF ("~eos");
X PUT_SDB_INT_VAL (size);
X PUT_SDB_SCL (C_EOS);
X PUT_SDB_TAG (name);
X***************
X*** 672,678
X {
X tree decl = current_function_decl;
X fprintf (file,
X! "\t.def\t.bb;\t.val\t.;\t.scl\t100;\t.line\t%d;\t.endef\n",
X line - sdb_begin_function_line);
X if (n == 1)
X {
X
X--- 677,683 -----
X {
X tree decl = current_function_decl;
X fprintf (file,
X! "\tdef\t~bb;\tval\t~;\tscl\t100;\tline\t%d;\tendef\n",
X line - sdb_begin_function_line);
X if (n == 1)
X {
X***************
X*** 694,700
X int line;
X {
X fprintf (file,
X! "\t.def\t.eb;.val\t.;\t.scl\t100;\t.line\t%d;\t.endef\n" ,
X line - sdb_begin_function_line);
X }
X
X
X--- 699,705 -----
X int line;
X {
X fprintf (file,
X! "\tdef\t~eb;\tval\t~;\tscl\t100;\tline\t%d;\tendef\n" ,
X line - sdb_begin_function_line);
X }
X
X***************
X*** 710,716
X {
X sdb_begin_function_line = line - 1;
X fprintf (asm_out_file,
X! "\t.def\t.bf;\t.val\t.;\t.scl\t101;\t.line\t%d;\t.endef\n",
X line);
X sdbout_parms (DECL_ARGUMENTS (current_function_decl));
X sdbout_reg_parms (DECL_ARGUMENTS (current_function_decl));
X
X--- 715,721 -----
X {
X sdb_begin_function_line = line - 1;
X fprintf (asm_out_file,
X! "\tdef\t~bf;\tval\t~;\tscl\t101;\tline\t%d;\tendef\n",
X line);
X sdbout_parms (DECL_ARGUMENTS (current_function_decl));
X sdbout_reg_parms (DECL_ARGUMENTS (current_function_decl));
X***************
X*** 724,730
X int line;
X {
X fprintf (asm_out_file,
X! "\t.def\t.ef;\t.val\t.;\t.scl\t101;\t.line\t%d;\t.endef\n",
X line - sdb_begin_function_line);
X }
X
X
X--- 729,735 -----
X int line;
X {
X fprintf (asm_out_file,
X! "\tdef\t~ef;\tval\t~;\tscl\t101;\tline\t%d;\tendef\n",
X line - sdb_begin_function_line);
X }
X
X***************
X*** 742,748
X sdbout_mark_end_function ()
X {
X PUT_SDB_DEF (IDENTIFIER_POINTER (DECL_NAME (current_function_decl)));
X! fputs ("\t.val\t.;", asm_out_file);
X PUT_SDB_SCL (C_EFCN);
X PUT_SDB_ENDEF;
X }
X
X--- 747,753 -----
X sdbout_mark_end_function ()
X {
X PUT_SDB_DEF (IDENTIFIER_POINTER (DECL_NAME (current_function_decl)));
X! fputs ("\tval\t~;", asm_out_file);
X PUT_SDB_SCL (C_EFCN);
X PUT_SDB_ENDEF;
X }
X*** ../gcc-1.23/tm-3b1.h Thu Jun 30 05:49:42 1988
X--- tm-3b1.h Mon Jul 4 08:59:21 1988
X***************
X*** 40,46
X /* we use /lib/libp/lib* when profiling */
X
X #undef LIB_SPEC
X! #define LIB_SPEC "%{!shlib:%{p:-L/lib/libp} %{pg:-L/lib/libp} -lc}"
X
X /* shared libraries need to use crt0s.o */
X
X
X--- 40,46 -----
X /* we use /lib/libp/lib* when profiling */
X
X #undef LIB_SPEC
X! #define LIB_SPEC "%{!shlib:%{p:-L/uh5h/ling/lee/lib73/libp} %{pg:-L/uh5h/ling/lee/lib73/libp} -lc}"
X
X /* shared libraries need to use crt0s.o */
X
X***************
X*** 57,62
X /* Define __HAVE_FPU__ in preprocessor if -m68881 is specified.
X This will control the use of inline 68881 insns in certain macros. */
X
X #define CPP_SPEC "%{m68881:-D__HAVE_FPU__}"
X
X /* Names to predefine in the preprocessor for this target machine. */
X
X--- 57,63 -----
X /* Define __HAVE_FPU__ in preprocessor if -m68881 is specified.
X This will control the use of inline 68881 insns in certain macros. */
X
X+ #undef CPP_SPEC
X #define CPP_SPEC "%{m68881:-D__HAVE_FPU__}"
X
X /* Names to predefine in the preprocessor for this target machine. */
X***************
X*** 278,284
X XVECLEN (PATTERN (TABLE), 1) + 1, PREFIX, NUM)
X
X #define ASM_OUTPUT_CASE_END(FILE,NUM,TABLE) \
X! fprintf (FILE, "\tset LD%d,L%d-LI%d\n", NUM, NUM, NUM);
X
X #define ASM_OUTPUT_OPCODE(FILE, PTR) \
X { if ((PTR)[0] == 'j' && (PTR)[1] == 'b') \
X
X--- 279,285 -----
X XVECLEN (PATTERN (TABLE), 1) + 1, PREFIX, NUM)
X
X #define ASM_OUTPUT_CASE_END(FILE,NUM,TABLE) \
X! fprintf (FILE, "\tset LD%d,L%d-LI%d\n", NUM, NUM, NUM)
X
X #define ASM_OUTPUT_OPCODE(FILE, PTR) \
X { if ((PTR)[0] == 'j' && (PTR)[1] == 'b') \
X***************
X*** 320,322
X
X #define ASM_OUTPUT_LABELREF(FILE,NAME) \
X fprintf (FILE, "%s", NAME)
X
X--- 321,324 -----
X
X #define ASM_OUTPUT_LABELREF(FILE,NAME) \
X fprintf (FILE, "%s", NAME)
X+ #define SDB_DEBUGGING_INFO
X*** ../gcc-1.23/toplev.c Thu Jun 30 05:49:53 1988
X--- toplev.c Mon Jul 4 06:04:32 1988
X***************
X*** 31,37
X #include <sys/types.h>
X #include <sys/stat.h>
X
X! #ifdef USG
X #include <sys/param.h>
X #include <sys/times.h>
X #include <time.h> /* Correct for hpux at least. Is it good on other USG? */
X
X--- 31,37 -----
X #include <sys/types.h>
X #include <sys/stat.h>
X
X! #ifdef HOST_USG
X #include <sys/param.h>
X #include <sys/times.h>
X #include <time.h> /* Correct for hpux at least. Is it good on other USG? */
X***************
X*** 286,292
X int
X gettime ()
X {
X! #ifdef USG
X struct tms tms;
X #else
X #ifndef VMS
X
X--- 286,292 -----
X int
X gettime ()
X {
X! #ifdef HOST_USG
X struct tms tms;
X #else
X #ifndef VMS
X***************
X*** 305,311
X if (quiet_flag)
X return 0;
X
X! #ifdef USG
X times (&tms);
X return (tms.tms_utime + tms.tms_stime) * (1000000 / HZ);
X #else
X
X--- 305,311 -----
X if (quiet_flag)
X return 0;
X
X! #ifdef HOST_USG
X times (&tms);
X return (tms.tms_utime + tms.tms_stime) * (1000000 / HZ);
X #else
X***************
X*** 1543,1549
X
X compile_file (filename);
X
X! #ifndef USG
X #ifndef VMS
X if (print_mem_flag)
X {
X
X--- 1543,1549 -----
X
X compile_file (filename);
X
X! #ifndef HOST_USG
X #ifndef VMS
X if (print_mem_flag)
X {
END_OF_FILE
if test 18897 -ne `wc -c <'x7300-diffs'`; then
echo shar: \"'x7300-diffs'\" unpacked with wrong size!
fi
# end of 'x7300-diffs'
fi
echo shar: End of archive 1 \(of 1\).
cp /dev/null ark1isdone
MISSING=""
for I in 1 ; do
if test ! -f ark${I}isdone ; then
MISSING="${MISSING} ${I}"
fi
done
if test "${MISSING}" = "" ; then
echo You have the archive.
rm -f ark[1-9]isdone
else
echo You still need to unpack the following archives:
echo " " ${MISSING}
fi
## End of shell archive.
exit 0
More information about the Unix-pc.sources
mailing list