Official patch #6 for mp v2.4; please apply it.
Rich Burridge
richb at sunaus.oz
Tue Sep 4 12:11:23 AEST 1990
Mp is a Postscript pretty printer for mail,news and ordinary files.
This is official patch #6 for mp v2.4. It has also been sent to the
moderator of comp.sources.misc to be posted there, and subsequently
archived.
** Mp v2.4 was posted to comp.sources.misc last week at patchlevel #5. **
It makes the following changes:
* From Amos Shapir <amos at taux01.nsc.com>
Interpreting a '&' in the GECOS field should capitalize only the
first letter of the login name, not all of it.
* From Bruce G Barnett <barnett at unclejack.crd.ge.com>
From Pauline van Winsen <pauline at Aus.Sun.COM>
Mp only extracted two "words" from the user's passwd gecos field.
This has been changed to now extract three "words" by default, but
two new definitions have been added to the Makefile.dist file to
allow you to adjust the username extraction:
GECOSFIELDS - Number of "words" extracted from the user's gecos field.
GECOSLENGTH - Maximum no. of chars. extracted from the gecos field.
See the comments in the Makefile.dist file for more details.
If needed, then these options should be uncommented and set accordingly.
The README file has been updated.
* From Johan Vromans <jv at mh.nl>
An attempt to initialise the cc array in main.c when the variable
is declared doesn't work with the GNU C compiler. This has been
removed. Yes folks, this is deja vu.
* From Johan Vromans <jv at mh.nl>
To allow MP to handle A4 formatted pages, I made a few mods to
mp.pro.ps. The reason to introduce the variables fullwidth and
fullheight is that they are used in more than one location.
Reasonable values for fullwidth and fullheight are 8.5/11 inch for US
Letter, and 8.5/11.4 inch for A4.
Since sites usually have one single format of paper, mp could be
installed with either the USLetter or A4 values.
I've also made the same modifications to mp.pro.alt.ps.
**IMPORTANT NOTE** You should adjust these values correctly for your
site. I've added a couple of comments to the
"make install" to try to remind people about this.
I've also left it defaulted at the US Letter size, so it should still
continue to work for A4 sites, but not use all of the paper.
TO INSTALL:
-----------
Apply this patch with Larry Wall's patch program. Copy Makefile.dist to
Makefile and adjust for your site. Then do a "make". Check the paper size
in mp.pro.ps is correct for your site (US Letter or A4), then do a "make
install".
Rich Burridge, DOMAIN: richb at Aus.Sun.COM
Sun Microsystems. ACSNET: richb at sunaus.sun.oz
PHONE: +61 2 413 2666 UUCP: {uunet,mcvax,ukc}!munnari!sunaus.oz!richb
------- README -------
*** /tmp/da00708 Tue Sep 4 11:43:02 1990
--- README Tue Sep 4 11:01:17 1990
***************
*** 47,54 ****
These are:
! PROLOGUE - Location of the mp prologue file (default: /usr/local/lib)
! NOINDEX - uncomment if you don't have the index() function.
See the Makefile for a detailed description of each of these definitions.
--- 47,56 ----
These are:
! GECOSFIELDS - Number of "words" extracted from the user's gecos field.
! GECOSLENGTH - Maximum number of characters extracted from the gecos field.
! NOINDEX - uncomment if you don't have the index() function.
! PROLOGUE - Location of the mp prologue file (default: /usr/local/lib)
See the Makefile for a detailed description of each of these definitions.
***************
*** 81,88 ****
Avolio, Mark Prior, Stephen Frede, Craig Bishop, Jimmy Aitken, Hugues Leroy,
Bertrand Decouty, David Fiedler, Scott A. Jordahl, David Boone, Steve Cliffe,
Maureen Chew, Brian Kohn, Walter Underwood, Mike Khaw, Rick Gunderson, Johan
! Vromans, Brachet, Pierre Mareschal, Roger Riggs, Larry Tsui and Mike
! Bundschuh for bug reports and/or bug fixes plus enhancements.
My thanks also goes to Glenn Reid from Adobe Systems for the backspacefont.ps
code used in the prologue files. I'm grateful to all these people, plus
--- 83,91 ----
Avolio, Mark Prior, Stephen Frede, Craig Bishop, Jimmy Aitken, Hugues Leroy,
Bertrand Decouty, David Fiedler, Scott A. Jordahl, David Boone, Steve Cliffe,
Maureen Chew, Brian Kohn, Walter Underwood, Mike Khaw, Rick Gunderson, Johan
! Vromans, Brachet, Pierre Mareschal, Roger Riggs, Larry Tsui, Mike Bundschuh,
! Amos Shapir, Bruce G Barnett and Pauline van Winsen for bug reports and/or
! bug fixes plus enhancements.
My thanks also goes to Glenn Reid from Adobe Systems for the backspacefont.ps
code used in the prologue files. I'm grateful to all these people, plus
------- mp.pro.ps -------
*** /tmp/da00711 Tue Sep 4 11:43:03 1990
--- mp.pro.ps Tue Sep 4 11:41:20 1990
***************
*** 10,19 ****
%%EndComments
/inch { 72 mul } def
/leftedge 0 def
! /rightedge 8.5 inch def
/bottomedge 0 def
! /topedge 11 inch def
/LandscapeMode false def
%Title: backspacefont.ps suggested by Glenn Reid (Adobe Systems).
--- 10,29 ----
%%EndComments
/inch { 72 mul } def
+ %
+ % IMPORTANT NOTE: The following two variables should be set correctly.
+ % Reasonable values for fullwidth and fullheight are
+ % 8.5/11 inch for US Letter, and 8.5/11.4 inch for A4.
+ % Since sites usually have one single format of paper,
+ % mp should be installed with either the USLetter or A4
+ % values.
+ %
+ /fullwidth 8.5 inch def
+ /fullheight 11 inch def
/leftedge 0 def
! /rightedge fullwidth def
/bottomedge 0 def
! /topedge fullheight def
/LandscapeMode false def
%Title: backspacefont.ps suggested by Glenn Reid (Adobe Systems).
***************
*** 129,136 ****
/Landscape
{
/LandscapeMode true def
! /rightedge 11 inch def
! /topedge 8.5 inch def
newpage
} def
--- 139,146 ----
/Landscape
{
/LandscapeMode true def
! /rightedge fullheight def
! /topedge fullwidth def
newpage
} def
------- main.c -------
*** /tmp/da00714 Tue Sep 4 11:43:03 1990
--- main.c Tue Sep 4 11:04:16 1990
***************
*** 74,80 ****
char *apparently_from = NULL ; /* Apparently_from: */
char *to[MAXCONT+1] ; /* To: (can have multiple lines) */
char *apparently_to = NULL ; /* Apparently_to: */
! char *cc[MAXCONT+1] = NULL ; /* Cc: (can have multiple lines) */
char *subject = NULL ; /* Subject: (can be set from command line) */
char *gsubject = NULL ; /* Global subject set from command line. */
char *date = NULL ; /* Date: */
--- 74,80 ----
char *apparently_from = NULL ; /* Apparently_from: */
char *to[MAXCONT+1] ; /* To: (can have multiple lines) */
char *apparently_to = NULL ; /* Apparently_to: */
! char *cc[MAXCONT+1] ; /* Cc: (can have multiple lines) */
char *subject = NULL ; /* Subject: (can be set from command line) */
char *gsubject = NULL ; /* Global subject set from command line. */
char *date = NULL ; /* Date: */
------- misc.c -------
*** /tmp/da00717 Tue Sep 4 11:43:04 1990
--- misc.c Tue Sep 4 10:50:46 1990
***************
*** 126,133 ****
--- 126,147 ----
char *c, *ptr ;
int amp_cnt = 0 ; /* Number of ampersands in gecos field. */
int i, j, n, spaces ;
+ int namefields ; /* Number of "words" from passwd gecos. */
+ int namelength ; /* Maximum number of characters from passwd gecos. */
struct passwd *pp ;
+ #ifdef GECOSFIELDS
+ namefields = GECOSFIELDS ; /* New no. of "words" from passwd gecos. */
+ #else
+ namefields = NAMEFIELDS ; /* Not supplied; use default. */
+ #endif /*GECOSFIELDS*/
+
+ #ifdef GECOSLENGTH
+ namelength = GECOSLENGTH ; /* New max. no. of chars. from passwd gecos. */
+ #else
+ namelength = NAMELENGTH ; /* Not supplied; use default. */
+ #endif /*GECOSLENGTH*/
+
c = getlogin() ; /* Pointer to users login name. */
if (c == NULL) /* Get username from password file */
{
***************
*** 141,147 ****
/* Have a look for the users gecos (normally real name), so that its a bit
* more recognisable. If this field is too long, then we need to truncate
* sensibly. We also need to check a few things. If we've extracted
! * two "words" or have found a comma, then exit. If an ampersand is
* found, this is expanded to the users name in capitals.
*/
--- 155,161 ----
/* Have a look for the users gecos (normally real name), so that its a bit
* more recognisable. If this field is too long, then we need to truncate
* sensibly. We also need to check a few things. If we've extracted
! * three "words" or have found a comma, then exit. If an ampersand is
* found, this is expanded to the users name in capitals.
*/
***************
*** 161,180 ****
if (*ptr == ',') break ;
else if (*ptr == '&')
{
! for (j = 0; j < strlen(c); j++)
! if (islower(c[j])) owner[n++] = toupper(c[j]) ;
! else owner[n++] = c[j] ;
*ptr++ ;
}
else if (*ptr == ' ')
{
! if (++spaces == 2) break ;
else owner[n++] = *ptr++ ;
}
else owner[n++] = *ptr++ ;
! if (n >= NAMELENGTH) break ;
}
! if (n > NAMELENGTH) n = NAMELENGTH ;
owner[n] = '\0' ;
}
if ((nameptr = getenv("NAME")) != NULL)
--- 175,194 ----
if (*ptr == ',') break ;
else if (*ptr == '&')
{
! if (islower(c[0])) owner[n++] = toupper(c[0]) ;
! for (j = 1; j < strlen(c); j++)
! owner[n++] = c[j] ;
*ptr++ ;
}
else if (*ptr == ' ')
{
! if (++spaces == namefields) break ;
else owner[n++] = *ptr++ ;
}
else owner[n++] = *ptr++ ;
! if (n >= namelength) break ;
}
! if (n > namelength) n = namelength ;
owner[n] = '\0' ;
}
if ((nameptr = getenv("NAME")) != NULL)
------- CHANGES -------
*** /tmp/da00720 Tue Sep 4 11:43:05 1990
--- CHANGES Tue Sep 4 11:36:02 1990
***************
*** 126,131 ****
--- 126,133 ----
v2.4 - patchlevel 5. - 29th August 1990.
+ * Posted to comp.sources.misc.
+
* From Larry W. Virden <lwv27%cas.BITNET at CUNYVM.CUNY.Edu>
Include a Makefile.dist with the mp distribution. This file will
need to be copied to Makefile and adjusted accordingly, but it does
***************
*** 135,137 ****
--- 137,182 ----
* From Lupe Christoph <lupe at alanya.Germany.Sun.COM>
mp.pro.filofax.ps and mp.pro.timeman.ps still contained definitions
for PrimaryFont and SecondaryFont.
+
+ v2.4 - patchlevel 6. - 4th September 1990.
+
+ * From Amos Shapir <amos at taux01.nsc.com>
+ Interpreting a '&' in the GECOS field should capitalize only the
+ first letter of the login name, not all of it.
+
+ * From Bruce G Barnett <barnett at unclejack.crd.ge.com>
+ From Pauline van Winsen <pauline at Aus.Sun.COM>
+ Mp only extracted two "words" from the user's passwd gecos field.
+ This has been changed to now extract three "words" by default, but
+ two new definitions have been added to the Makefile.dist file to
+ allow you to adjust the username extraction:
+
+ GECOSFIELDS - Number of "words" extracted from the user's gecos field.
+ GECOSLENGTH - Maximum no. of chars. extracted from the gecos field.
+
+ See the comments in the Makefile.dist file for more details.
+ If needed, then these options should be uncommented and set accordingly.
+ The README file has been updated.
+
+ * From Johan Vromans <jv at mh.nl>
+ An attempt to initialise the cc array in main.c when the variable
+ is declared doesn't work with the GNU C compiler. This has been
+ removed. Yes folks, this is deja vu.
+
+ * From Johan Vromans <jv at mh.nl>
+ To allow MP to handle A4 formatted pages, I made a few mods to
+ mp.pro.ps. The reason to introduce the variables fullwidth and
+ fullheight is that they are used in more than one location.
+ Reasonable values for fullwidth and fullheight are 8.5/11 inch for US
+ Letter, and 8.5/11.4 inch for A4.
+ Since sites usually have one single format of paper, mp could be
+ installed with either the USLetter or A4 values.
+
+ I've also made the same modifications to mp.pro.alt.ps.
+
+ **IMPORTANT NOTE** You should adjust these values correctly for your
+ site. I've added a couple of comments to the
+ "make install" to try to remind people about this.
+
+ I've also left it defaulted at the US Letter size, so it should still
+ continue to work for A4 sites, but not use all of the paper.
------- patchlevel.h -------
*** /tmp/da00723 Tue Sep 4 11:43:05 1990
--- patchlevel.h Tue Sep 4 09:47:47 1990
***************
*** 14,17 ****
* reported to me then an attempt will be made to fix them.
*/
! #define PATCHLEVEL 5
--- 14,17 ----
* reported to me then an attempt will be made to fix them.
*/
! #define PATCHLEVEL 6
------- mp.h -------
*** /tmp/da00726 Tue Sep 4 11:43:06 1990
--- mp.h Tue Sep 4 10:20:27 1990
***************
*** 59,64 ****
--- 59,65 ----
#define MAXSIZES 4 /* Maximum number of different sizes. */
+ #define NAMEFIELDS 3 /* Default no. of "words" from passwd gecos. */
#define NAMELENGTH 18 /* Maximum allowable real user name. */
#define PAGELENGTH 60 /* Number of lines per page. */
#define MAXCONT 10 /* Maximum no of continuation header lines */
------- Makefile.dist -------
*** /tmp/da00729 Tue Sep 4 11:43:06 1990
--- Makefile.dist Tue Sep 4 11:34:29 1990
***************
*** 23,28 ****
--- 23,46 ----
#
#PROLOGUE = -DPROLOGUE=\"$(LIBDIR)\"
#---------------------------------------------------------------------
+ # Mp will extract the user's gecos field, and try to make sense of what
+ # it finds. It applies various rules to do this. If this field is too long,
+ # then it needs to truncate sensibly. If it's extracted N "words" or has
+ # found a comma, then it stops extracting. If an ampersand is found, this
+ # is expanded to the users name in capitals.
+ # This option allows you to change the number of "words" that mp extracts
+ # from the gecos field. By default this is 3. If needed, then it should
+ # be uncommented, and set accordingly.
+ #
+ #GECOSFIELDS = -DGECOSFIELDS=3
+ #---------------------------------------------------------------------
+ # Mp will extract upto a certain number of characters from the user's
+ # passwd gecos field. By default, this is 18. This option allows you to
+ # set this to something different. If needed, then it should be uncommented,
+ # and set accordingly.
+ #
+ #GECOSLENGTH = -DGECOSLENGTH=18
+ #---------------------------------------------------------------------
# Not all machines have the index() string library function. If you
# don't have this function then you should uncomment the NOINDEX
# definition below.
***************
*** 40,46 ****
#
# Compilation flags and standard macro definitions.
#
! CFLAGS = -g $(NOINDEX) $(PROLOGUE)
LDFLAGS =
#=================================================================
--- 58,64 ----
#
# Compilation flags and standard macro definitions.
#
! CFLAGS = -g $(GECOSFIELDS) $(GECOSLENGTH) $(NOINDEX) $(PROLOGUE)
LDFLAGS =
#=================================================================
***************
*** 67,72 ****
--- 85,98 ----
cc $(LDFLAGS) -o mp $(OBJS)
install: $(BINARIES)
+ @echo
+ @echo "**IMPORTANT NOTE**"
+ @echo
+ @echo "Mp is setup by default to work with US Letter sized paper."
+ @echo "If you are using A4 sized paper, it is suggested that you"
+ @echo "adjust the definitions of fullwidth and fullheight, at the"
+ @echo "start of the mp.pro.ps file, then reinstall."
+ @echo
install -s -m 751 mp $(BINDIR)
install -c -m 644 mp.1 $(MANDIR)/mp.$(MANSECT)
install -c -m 644 mp.pro.ps $(LIBDIR)
------- TODO -------
*** /tmp/da00732 Tue Sep 4 11:43:07 1990
--- TODO Tue Sep 4 11:40:09 1990
***************
*** 41,43 ****
--- 41,66 ----
Better, a short program that takes a general mp.pro.organiser.ps and
substitutes a few variables. Or you can use short PostScript fragments,
one for each personal organisers.
+
+ 7/ From Lupe Christoph <lupe at alanya.Germany.Sun.COM>
+ The Time Manager and Filofax prologue files don't work correctly with
+ printers that are setup for page reversal. The solution (which I've
+ yet to implement), comes from Johan Vromans:
+
+ "The problem is caused by the fact that you insert a "%Page: ? nn"
+ before each *LOGICAL* page. It should be inserted only before *PHYSICAL*
+ pages. For filofax and timemanager (3 cols/page) that means that you
+ need something like:
+
+ %% Preamble
+ %%Page: ? 1
+ ..page1..
+ endpage
+ ..page2..
+ endpage
+ ..page3..
+ endpage
+ %%Page: ? 2
+ ..page4..
+ endpage
+ ..."
------- mp.pro.alt.ps -------
*** /tmp/da00735 Tue Sep 4 11:43:07 1990
--- mp.pro.alt.ps Tue Sep 4 11:41:33 1990
***************
*** 10,19 ****
%%EndComments
/inch { 72 mul } def
/leftedge 0 def
! /rightedge 8.5 inch def
/bottomedge 0 def
! /topedge 11 inch def
/LandscapeMode false def
%Title: backspacefont.ps suggested by Glenn Reid (Adobe Systems).
--- 10,29 ----
%%EndComments
/inch { 72 mul } def
+ %
+ % IMPORTANT NOTE: The following two variables should be set correctly.
+ % Reasonable values for fullwidth and fullheight are
+ % 8.5/11 inch for US Letter, and 8.5/11.4 inch for A4.
+ % Since sites usually have one single format of paper,
+ % mp should be installed with either the USLetter or A4
+ % values.
+ %
+ /fullwidth 8.5 inch def
+ /fullheight 11 inch def
/leftedge 0 def
! /rightedge fullwidth def
/bottomedge 0 def
! /topedge fullheight def
/LandscapeMode false def
%Title: backspacefont.ps suggested by Glenn Reid (Adobe Systems).
***************
*** 122,129 ****
/Landscape
{
/LandscapeMode true def
! /rightedge 11 inch def
! /topedge 8.5 inch def
newpage
} def
--- 132,139 ----
/Landscape
{
/LandscapeMode true def
! /rightedge fullheight def
! /topedge fullwidth def
newpage
} def
More information about the Comp.sources.bugs
mailing list