wsh Size=> Previous

[Brent Bates ViGYAN AAD/TAB]

   This message is mainly directed at SGI people, however, I would like
comments from others.  I find it an annoyance when I select Size=>Previous
from a wsh window and it doesn't put the window in the previous position.
The size is changed back, but it isn't put back in the same location.
   For example I have a small window and I enlarge it by changing the upper
left corner.  If I then select previous, I would expect that corner to move
back to its original position.  However, what actually happens is the the
window is returned to the previous size with the lower left corner NEVER
moving.  All resizing is done with the lower left corner remaining in its
current position.
   Now this may be a mute point with SGI going to X, but if it isn't, it
should be fixed.

	Brent L. Bates
	NASA-Langley Research Center
	M.S. 361
	Hampton, Virginia  23665-5225
	Phone:(804) 864-2854          FAX:(804) 864-6792
	E-mail: blbates at aero36.larc.nasa.gov or blbates at aero8.larc.nasa.gov