FAS install fails: kconfig

[Conor P. Cahill]

In article <150 at xyzoom.UUCP> rob at xyzoom.info.com (Rob Lingelbach) writes:
>
>I'm trying to install FAS 2.07 to allow use of the AST 4 port card, and
>the kernel build is failing with the following message (ISC 2.2):
>
>LINE:fas	Y	4	7	1	9	2a0	2bf
                                       ^^^^
The problem is associated with field 5.  This field contains a 1 (as in 
your case) when each sdevice entry requires a separate interrupt (i.e. does
not share the interrupts).

If FAS2.07 does in fact share interrupts, then you need to set this field
to a 2 or 3.  See sdevice(4) for more info.


-- 
Conor P. Cahill            (703)430-9247        Virtual Technologies, Inc.,
uunet!virtech!cpcahil                           46030 Manekin Plaza, Suite 160
                                                Sterling, VA 22170