Please post
Wm E Davidsen Jr
davidsen at crdos1.crd.ge.COM
Mon Dec 3 19:15:28 AEST 1990
SCO Support Level Supplements - 11/30/90
These are updates and "fixit" distributions from the Santa Cruz Operation.
Many of these are available via anonymous uucp - see the section at the end
of this file. These distributions are available to SCO customers who have
the corresponding products, and have registered the product serial numbers
with SCO. You can call, register your product, and order an SLS at
the same time, or email to support at sco.com. SCO USA,PAL Support can be
reached at 800-347-4381. Support email address is support at sco.com.
Please do not call them to place orders, ask questions about
sales/business matters, etc. Sales questions may
be directed to the general sales numbers:
SCO (USA, Pacific, Asia, Latin America) 800-726-8649
SCO Canada (Canadians, pls use this number) 800-461-6962
SCO Ltd. (Europe, Middle East, Africa) +44 (0)923 816344
... or email to info at sco.com
Product Version Machine Title SLS #
SCO ODT-PS 3.2.1 386GT WD7000 Support Level Supplement unx208
SCO ODT-PS 1.0.0 386GT ODT-DOS/Sio unx217
SCO ODT-PS 1.0.0 n386 X Select and Networking Library unx221
SCO UNIX/ODT-PS3.2.0 KU386 SCO UNIX Irwin Driver unx222
SCO UNIX 3.2.0 V2 386GT SCO UNIX Maintenance Disk Release 1 unx251
SCO UNIX 3.2.0 386GT Unix Utility Update unx162
SCO UNIX 3.2.0 386MC Adaptec 1640 Supplement unx186
SCO UNIX 3.2.0 KU386 SCO Security Supplement unx223
SCO UNIX 3.2.0 U386 Usenet News unx194
SCO UNIX 3.2.0 U386 Custom Update unx235
UNIX/XENIX 2.3.2 n386 Logitech Busmouse Driver unx204
UNIX/XENIX 2.3 n286 Hayes V-Series Modem Support Module unx220
UNIX/XENIX 2.2.3 n386 SCO Xenix/Unix Crypt Support lng190
SCO XENIX 2.3.2 386GT Additional Hard Drive Supplement xnx259
SCO XENIX 2.3.2 286PS SCO ESDI Supplement for SCO XENIX 2 xnx231
SCO XENIX 2.3.2 386GT Intel 303 Installation Supplement xnx151
SCO XENIX 2.3.2 386MC Support for 2 Adaptec 1640's xnx170
SCO XENIX 2.3.2 386MC 16Mb Support for C & T Chip Set xnx171
SCO XENIX 2.3.2 386MC SCO ESDI Supplement for SCO XENIX 3 xnx232
SCO XENIX 2.3.2 386PS Tecmar/Wangtek MicroChannel Qic-02 xnx166
SCO XENIX 2.3.2 n386 Select Pipe Support xnx141
SCO XENIX 2.3.1 386AT Serial Console Driver xnx119
SCO XENIX 2.3.1 386AT Delayed Boot xnx126
SCO XENIX 2.3.1 386AT Tecmar/Wangtek Qic-02 Single Driver xnx149
SCO XENIX 2.3.1 ALL_AT Mountain Multiple Tape Driver xnx102
SCO XENIX 2.3.1 n386 ps(C) seek Supplement xnx120
SCO XENIX 2.3.0 386AT Parallel Printing xnx115
SCO XENIX 2.3.0 386AT RTS/CTS Handshaking xnx105
SCO XENIX 2.3.0 386AT Excelan TCP/IP xnx104
SCO XENIX 2.3.0 386AT fsck Supplement xnx124
SCO XENIX 2.3.0 386AT Update R Supplement xnx137
SCO XENIX 2.3.0 386AT 386 UUCP Binaries xnx129
SCO XENIX 2.3.0 386GT Adaptec High Performance SCSI Drive xnx252
SCO XENIX 2.3.0 n386 MAPKEY Supplement xnx116
SCO XENIX 2.3.0 n386 SCO Xenix 386 Maintenance Supplemen xnx155
SCO XENIX 2.2.3 286AT /etc/rc xnx107
SCO XENIX 2.2.3 286AT VGA Driver xnx084
SCO XENIX 2.2.3 286AT Hercules Plus xnx113
SCO XENIX 2.2.3 386AT VGA Driver xnx086
SCO XENIX 2.2.3 386AT Compaq 386/SX xnx095
SCO XENIX 2.2.3 386PS IBM PS/2 Maintenance Supplement xnx106
SCO XENIX 2.2.3 386PS Sun River Driver xnx134
SCO XENIX 2.2.3 386PS QIC-40 Tape Driver xnx150
SCO XENIX 2.2.3 386PS IBM PS/2 Model 70/80 xnx117
SCO XENIX 2.2.3 ALL_AT Internal Modem Supplement xnx128
SCO XENIX 2.2.3 ALL_AT WD1007A Hard Disk Controller xnx133
SCO XENIX 2.2.3 n286 Irwin Tape Drivers xnx146
SCO XENIX 2.2.3 n286 Cron Supplement xnx080
SCO XENIX 2.2.3 n386 Qic-40/Qic-80 Tape Device Driver xnx118
SCO XENIX 2.2.2 286PS IBM PS/2 Model 50Z xnx103
SCO XENIX 2.2.2 386AT Intel Errata 20 xnx090
SCO XENIX 2.2.2 386AT MS-BASIC Compatibility xnx074
SCO XENIX 2.2.2 386PS Tecmar Microchannel Tape Driver xnx094
SCO XENIX 2.2.2 ALL_PS Archive Microchannel xnx122
Product Version Machine Title SLS #
SCO XENIX 2.2.1 386AT Logger Supplement xnx076
SCO XENIX 2.2.1 ALL_AT Archive/Tecmar Tape Driver xnx097
SCO XENIX 2.2.1 n286 Large Disk Bad Track xnx057
SCO XENIX 2.2.1 n286 Terminfo Database xnx059
SCO XENIX 2.2.0 n286 sort(C) Supplement xnx002
SCO XENIX 2.2.0 n286 cu(C) Lock Files xnx030
SCO XENIX 2.2.0 n286 Mountain QIC-02 Tape Driver xnx071
SCO XENIX 2.2.0 n286 Telebit Modem and uucico xnx072
SCO XENIX 2.2.0 n86 Termcap Database xnx101
SCO XENIX 2.2.0 n86 USENET News xnx143
UNIX Dev Sys 3.2.0 U386 International Crypt SLS lng225
UNIX Dev Sys 3.2.0 n386 SCO UNIX Dev Sys Utilities lng161
UNIX Dev Sys 3.2.0 n386 XPG2 Support Level Supplement lng090
UNIX/XENIX Dev 2.3.0 n386 /lib/ldr Support Level Supplement lng238
XENIX Dev Sys 2.3.1 n386 2.3.1 Development System Supplement lng244
XENIX Dev Sys 2.2.0 286 Development System Update lng061
XENIX Dev Sys 2.2.0 286AT Shared Data lng056
XENIX Dev Sys 2.2.0 386 Development System Update lng060
XENIX Dev Sys 2.2.0 n286 Mouse Driver Example lng044
XENIX Dev Sys 2.2.0 n386 Device Driver Documentation lng062
XENIX Dev Sys 2.1.3 286AT DOS Floating Point Libraries lng013
SCO CGI 1.1.0 n286 HP 7475A Plotter Supplement lng088
MS Word 5.0.0 n386 MS Word Printer Supplement app189
MS Word 5.0.0 n386 International Keyboard Supplement app198
MS Word 3.0.1 n286 MS WORD termdesc/ipa Supplement app099
SCO Fox+ 2.0.0 OTHER Fox/Pro Postscript Translator app196
SCO Fox+ 1.0.4c IBMRT SCO FoxBASE+ 1.0.4c SLS for the IBM app147
SCO Fox+ 1.0.4 ATT3B /usr/lib/foxplus/termcap for AT&T 3 app094
SCO Fox+ 1.0.4 IBMRT SCO FoxBASE+ for the IBM/RT Form Su app187
SCO Fox 1.0.1 n286 cron(C), at(C) Supplement app042
Informix 3.30.12y n286 Memory Use Improvements app077
SCO NFS/ODT-PS 1.1.0 U386 PC NFS lng230
SCO NFS/ODT-PS 1.0.0 U386 ODT-NET (NFS) Serialization lng218
SCO TCP/IP/ODT 1.1.1 KU386 TCP/ip Driver Supplement lng227
SCO SNA-PI0 1.0.0 n386 386 PI0 Libraries app093
Multiview Deskt1.0.0 n386 New Communications File app203
LPI-BASIC 02.07.02 386AT LPI-BASIC Update 02.12.00 lng081
LPI-COBOL 05.41.00 n386 LPI-COBOL Update rev. 05.65.00 lng084
LPI-PASCAL 02.08.00 n386 LPI-PASCAL Update 02.11.00 lng083
LPI-PL/1 03.05.10 n386 LPI-PL/1 Update 03.05.20 lng077
Product Version Machine Title SLS #
All SCO Online Support (SOS) Informatio xnx121
All n86 DiSCOver Articles xnx114
Page 1 XENIX Operating System Support Level Supplements as of 11/30/90
===========================================================================
SLS #xnx259 Additional Hard Drive Supplement
For SCO XENIX version: 2.32 machine: 386GT
Available on: 96tpi, 135tpi
Submitted on: 10/01/90
Description:
This Support Level Supplement will allow for the installation of additional
hard drive types under SCO XENIX 386GT.
===========================================================================
SLS #xnx252 Adaptec High Performance SCSI Drivers
For SCO XENIX version: 2.3.0 to 2.3.2 machine: 386GT
Available on: 48tpi, 135tpi
Submitted on: 09/01/90
Description:
This Support Level Supplement improves performance of SCSI drivers under SCO
XENIX 386GT. Not for use with SCO XENIX 386AT or SCO XENIX 286.
Revision B
===========================================================================
SLS #xnx232 SCO ESDI Supplement for SCO XENIX 386 MCA
For SCO XENIX version: 2.3.2 machine: 386MC
Available on: 135tpi
Submitted on: 08/01/90
Description:
This Support Level Supplement provides ESDI support to SCO XENIX for 386
computers based on Micro Channel architecture (MCA) for IBM machines,
Models 55SX, 65SX, 70 and 80.
===========================================================================
SLS #xnx231 SCO ESDI Supplement for SCO XENIX 286 MCA
For SCO XENIX version: 2.3.2 machine: 286PS
Available on: 135tpi
Submitted on: 09/01/90
Description:
This Support Level Supplement provides ESDI support for SCO XENIX for 286
computers based on Micro Channel Architecture (MCA) for IBM machines,
Models 50 and 60.
===========================================================================
SLS #xnx171 16Mb Support for C & T Chip Set
For SCO XENIX version: 2.3.2 machine: 386MC
Available on: 135tpi
Submitted on: 06/01/90
Description:
This Support Level Supplement disallows DMA in the top 128Kb of memory when
running SCO XENIX 386MC Operating System Release 2.3.2, and using the Chips
and Technologies chip set.
===========================================================================
Page 2 XENIX Operating System Support Level Supplements as of 11/30/90
===========================================================================
SLS #xnx170 Support for 2 Adaptec 1640's
For SCO XENIX version: 2.3.2 machine: 386MC
Available on: 135tpi
Submitted on: 06/01/90
Description:
This Support Level Supplement modifies the Adaptec Driver to allow
installation of 2 host adapters.
===========================================================================
SLS #xnx166 Tecmar/Wangtek MicroChannel Qic-02 Single Chip Tape Driver
For SCO XENIX version: 2.3.2 machine: 386PS
Available on: 135tpi
Submitted on: 02/01/90
Description:
This Support Level Supplement (SLS) xnx166 provides support for the
Tecmar/Wangtek Micro Channel QIC-02 Single Chip Host Adaptor.
===========================================================================
SLS #xnx155 SCO Xenix 386 Maintenance Supplement
For SCO XENIX version: 2.3.0 to 2.3.2 machine: n386
Available on: 96tpi, 135tpi
Submitted on: 04/01/90
Description:
This SCO XENIX 386 Maintenance Supplement UFM corrects and modifies the
SCO XENIX Release 2.3 kernel and utilities.
[REVISION A, SUPERCEDED BY REVISION B]
===========================================================================
SLS #xnx151 Intel 303 Installation Supplement
For SCO XENIX version: 2.3.2 machine: 386GT
Available on: 96tpi
Submitted on: 11/01/89
Description:
This Support Level Supplement allows SCO XENIX 386GT Operating System Release
2.3.2 to operate on an Intel 303 machine.
===========================================================================
SLS #xnx150 QIC-40 Tape Driver
For SCO XENIX version: 2.2.3 machine: 386PS
Available on: 135tpi
Submitted on: 10/01/89
Description:
This Support Level Supplement provides support for the QIC-40 tape drives
under SCO XENIX 386PS Operating System Release 2.2.3.
===========================================================================
Page 3 XENIX Operating System Support Level Supplements as of 11/30/90
===========================================================================
SLS #xnx149 Tecmar/Wangtek Qic-02 Single Driver
For SCO XENIX version: 2.3.1 to 2.3.2 machine: 386AT
Available on: 48tpi, 135tpi
Submitted on: 02/01/90
Description:
This Support Level Supplement provides support for the Tecmar/Wangtek Qic-02
Single Chip Host Adaptor.
===========================================================================
SLS #xnx146 Irwin Tape Drivers
For SCO XENIX version: 2.2.3 to 2.3.2 machine: n286
Available on: 48tpi, 135tpi
Submitted on: 05/01/90
Description:
This SLS provides tape drivers for the Irwin series of tape drives, running
on SCO XENIX 286 and 386 Operating Systems Releases 2.2.3 to 2.3.2. Revision
C aids in the reduction of problems running SCO XENIX on IBM PS/2 machines.
===========================================================================
SLS #xnx143 USENET News
For SCO XENIX version: 2.2.0 to 2.3.2 machine: n86
Available on: 96tpi, 135tpi
Submitted on: 07/21/89
Description:
This Support Level Supplement contains programs, utilities, and documentation
to establish a USENET News site and a news feed to UUNET.
This SLS supercedes the previous USENET News SLS, xnx064.
===========================================================================
SLS #xnx141 Select Pipe Support
For SCO XENIX version: 2.3.2 machine: n386
Available on: 96tpi, 135tpi
Submitted on: 06/01/89
Description:
This Support Level Supplement provides support for the select (s)
call on pipes.
===========================================================================
SLS #xnx137 Update R Supplement
For SCO XENIX version: 2.3.0 to 2.3.1 machine: 386AT
Available on: 96tpi, 135tpi
Submitted on: 06/01/89
Description:
This Support Level Supplement is specifically designed to bring customers
running SCO XENIX 386 Operating System Release 2.3.0 or 2.3.1 on AT machines
to Release 2.3.2.
===========================================================================
Page 4 XENIX Operating System Support Level Supplements as of 11/30/90
===========================================================================
SLS #xnx134 Sun River Driver
For SCO XENIX version: 2.2.3 machine: 386PS
Available on: 135tpi
Submitted on: 05/01/89
Description:
This Support Level Supplement provides the Sun River terminal driver
SCO XENIX Operating System Release 2.2.3 running on IBM PS/2 386 machines.
===========================================================================
SLS #xnx133 WD1007A Hard Disk Controller
For SCO XENIX version: 2.2.3 to 2.3.2 machine: ALL_AT
Available on: 48tpi, 135tpi
Submitted on: 05/01/89
Description:
This Support Level Supplement solves problems with hard disk access on
machines using the Western Digital WD1007A hard disk controller card. All
systems using this controller card should obtain this supplement.
===========================================================================
SLS #xnx129 386 UUCP Binaries
For SCO XENIX version: 2.3.0 to 2.3.1 machine: 386AT
Available on: 96tpi, 135tpi
Submitted on: 07/01/89
Description:
This SLS contains new UUCP binaries for SCO XENIX 386 Operating System
Release 2.3.0 and 2.3.1 which correct timing problems and occasional core
dumping of UUCP processes in these releases.
===========================================================================
SLS #xnx128 Internal Modem Supplement
For SCO XENIX version: 2.2.3 to 2.3.2 machine: ALL_AT
Available on: 48tpi, 135tpi
Submitted on: 04/01/89
Description:
This supplement allows an internal modem to answer incoming calls.
Previously, the error message "Garbage or loose cable on serial dev x, port
shut down." was displayed on console.
===========================================================================
SLS #xnx126 Delayed Boot
For SCO XENIX version: 2.3.1 to 2.3.2 machine: 386AT
Available on: 96tpi, 135tpi
Submitted on: 03/01/89
Description:
This supplement provides a new /boot with additional timing delays for 2.3
kernels larger than 640K that return a boot prompt instead of booting.
===========================================================================
Page 5 XENIX Operating System Support Level Supplements as of 11/30/90
===========================================================================
SLS #xnx124 fsck Supplement
For SCO XENIX version: 2.3.0 to 2.3.1 machine: 386AT
Available on: 48tpi, 135tpi
Submitted on: 03/01/89
Description:
This Support Level Supplement provides a new /bin/fsck utility (from the
2.3.2 386AT Release) that corrects problems with fsck quitting prematurely,
usually in Phase 1.
===========================================================================
SLS #xnx122 Archive Microchannel
For SCO XENIX version: 2.2.2 to 2.2.3 machine: ALL_PS
Available on: 135tpi
Submitted on: 01/01/89
Description:
This Support Level Supplement adds support for the Archive VP409 Microchannel
tape system for SCO Xenix 286 and 386 Operating System Release 2.2.2 and
2.2.3, running on IBM PS/2 machines.
===========================================================================
SLS #xnx121 SCO Online Support (SOS) Information
For All version: machine:
Available on: Documentation
Submitted on: 01/01/89
Description:
This document contains answers to the most commonly asked questions
about SOS, the SCO Online Support System.
===========================================================================
SLS #xnx120 ps(C) seek Supplement
For SCO XENIX version: 2.3.1 machine: n386
Available on: 48tpi, 135tpi
Submitted on: 01/01/88
Description:
The ps command in 2.3 halts execution and displays the error message
"ps: seek error".
===========================================================================
SLS #xnx119 Serial Console Driver
For SCO XENIX version: 2.3.1 machine: 386AT
Available on: 96tpi, 135tpi
Submitted on: 01/01/89
Description:
This supplement allows use of a serial console with SCO XENIX 386
Release 2.3.1. This supplement consists of a modified kernel on a
revised N1 disk.
===========================================================================
Page 6 XENIX Operating System Support Level Supplements as of 11/30/90
===========================================================================
SLS #xnx118 Qic-40/Qic-80 Tape Device Driver
For SCO XENIX version: 2.2.3 to 2.3.2 machine: n386
Available on: 96tpi, 135tpi
Submitted on: 02/01/89
Description:
This Support Level Supplement provides support for Qic-40/Qic-80 tape drives
from Alloy, Archive, Mountain, Tecmar and Wangtek.
(rev.e)
===========================================================================
SLS #xnx117 IBM PS/2 Model 70/80
For SCO XENIX version: 2.2.3 machine: 386PS
Available on: 135tpi
Submitted on: 02/01/90
Description:
This SLS provides a maintenance supplement for the SCO XENIX 386 Operating
System Release 2.2.2 (and 2.2.3 with Update K installed) for the IBM PS/2.
(This is xnx117, revision c.)
===========================================================================
SLS #xnx116 MAPKEY Supplement
For SCO XENIX version: 2.3.0 machine: n386
Available on: 48tpi, 135tpi
Submitted on: 12/01/88
Description:
This fix contains a new copy of the mapkey program for SCO XENIX Releases
2.3.0 and 2.3.1, which allows key files in prior releases to be read in 2.3.
===========================================================================
SLS #xnx115 Parallel Printing
For SCO XENIX version: 2.3.0 machine: 386AT
Available on: 48tpi, 135tpi
Submitted on: 11/01/88
Description:
This fix corrects problems with slow parallel printing under SCO XENIX 386
Operating System Release 2.3.0 and 2.3.1 for AT class machines.
===========================================================================
SLS #xnx114 DiSCOver Articles
For All version: machine: n86
Available on: 96tpi, 135tpi
Submitted on: 12/01/88
Description:
This supplement provides technical articles from the DiSCOver Technical
Bulletin text files that can be installed on your SCO XENIX system.
===========================================================================
Page 7 XENIX Operating System Support Level Supplements as of 11/30/90
===========================================================================
SLS #xnx113 Hercules Plus
For SCO XENIX version: 2.2.3 to 2.2.3 machine: 286AT
Available on: 96tpi, 135tpi
Submitted on: 01/01/89
Description:
This Support Level Supplement corrects the loss of output and the appearance
of spurious graphics characters when using the Hercules Graphics PLUS card
with SCO Xenix 286 Operating System Release 2.2.3.
===========================================================================
SLS #xnx107 /etc/rc
For SCO XENIX version: 2.2.3 machine: 286AT
Available on: 48tpi
Submitted on: 10/01/88
Description:
Provides a full /etc/rc file to replace the truncated /etc/rc included in
the standard distribution.
===========================================================================
SLS #xnx106 IBM PS/2 Maintenance Supplement
For SCO XENIX version: 2.2.3 machine: 386PS
Available on: 135tpi
Submitted on: 02/01/90
Description:
Maintenance Supplement for SCO Xenix Operating System release 2.2.3 for
the IBM PS/2. This is revision C for the Support Level Supplement (SLS)
Xnx106.
===========================================================================
SLS #xnx105 RTS/CTS Handshaking
For SCO XENIX version: 2.3.0 machine: 386AT
Available on: 96tpi, 135tpi
Submitted on: 10/01/88
Description:
Corrects problems using RTS/CTS handshaking.
===========================================================================
SLS #xnx104 Excelan TCP/IP
For SCO XENIX version: 2.3.0 to 2.3.1 machine: 386AT
Available on: 96tpi
Submitted on: 10/01/88
Description:
Allows Excelan TCP/IP driver 8011-05 Version 9 to work with SCO XENIX Release
2.3.0 and 2.3.1.
===========================================================================
Page 8 XENIX Operating System Support Level Supplements as of 11/30/90
===========================================================================
SLS #xnx103 IBM PS/2 Model 50Z
For SCO XENIX version: 2.2.2 to 2.2.3 machine: 286PS
Available on: 135tpi
Submitted on: 10/01/88
Description:
This allows installation on the 30mb IBM PS/2 Model 50Z. It requires the
N diskettes from the SCO XENIX 286 Release 2.2.3 for the PS/2.
===========================================================================
SLS #xnx102 Mountain Multiple Tape Driver
For SCO XENIX version: 2.3.1 to 2.3.2 machine: ALL_AT
Available on: 48tpi, 135tpi
Submitted on: 11/01/88
Description:
Allows use of multiple Mountain tape drives in SCO XENIX 286/386 Operating
System Release 2.3.1 and 2.3.2.
===========================================================================
SLS #xnx101 Termcap Database
For SCO XENIX version: 2.2.0 to 2.2.3 machine: n86
Available on: 48tpi, 135tpi
Submitted on: 11/01/88
Description:
Previously unsupported terminals now are described/listed in SCO XENIX
Operating System Release 2.3. /etc/termcap.
===========================================================================
SLS #xnx097 Archive/Tecmar Tape Driver
For SCO XENIX version: 2.2.1 to 2.2.3 machine: ALL_AT
Available on: 48tpi, 135tpi
Submitted on: 06/01/88
Description:
This Support Level Supplement allows Archive SC499R, VP402, and Tecmar QA
short cards to work with SCO XENIX Release 2.2 AT Class machines.
===========================================================================
SLS #xnx095 Compaq 386/SX
For SCO XENIX version: 2.2.3 machine: 386AT
Available on: 96tpi
Submitted on: 06/01/88
Description:
New SCO XENIX "N" volumes for the Compaq "Panther" Model 386S Intel
P9-based computer.
===========================================================================
Page 9 XENIX Operating System Support Level Supplements as of 11/30/90
===========================================================================
SLS #xnx094 Tecmar Microchannel Tape Driver
For SCO XENIX version: 2.2.2 to 2.2.3 machine: 386PS
Available on: 135tpi
Submitted on: 07/01/88
Description:
Device Driver for Tecmar Microchannel Adapter for IBM PS/2 Model 80.
===========================================================================
SLS #xnx090 Intel Errata 20
For SCO XENIX version: 2.2.2 to 2.2.3 machine: 386AT
Available on: 48tpi, 135tpi
Submitted on: 05/01/88
Description:
This Support Level Supplement will correct problems with the ALR 386/2,
386/220s and other 386 based machines which intermittently hang under SCO
Xenix Releases 2.2.2 and 2.2.3. Addresses Intel 386 Errata 20.
===========================================================================
SLS #xnx086 VGA Driver
For SCO XENIX version: 2.2.3 to 2.2.3 machine: 386AT
Available on: 96tpi, 135tpi
Submitted on: 07/01/88
Description:
Corrects the font problem experienced with ATI, IBM, and Olivetti VGA
cards in EGA mode upon exit from SCO CGI or SCO ImageBuilder.
===========================================================================
SLS #xnx084 VGA Driver
For SCO XENIX version: 2.2.3 to 2.2.3 machine: 286AT
Available on: 96tpi, 135tpi
Submitted on: 07/01/88
Description:
This fixes the font problem experienced with ATI, IBM, and Olivetti
VGA cards in EGA mode, upon exit from SCO CGI or SCO ImageBuilder.
===========================================================================
SLS #xnx080 Cron Supplement
For SCO XENIX version: 2.2.3 to 2.3.2 machine: n286
Available on: 48tpi, 135tpi
Submitted on: 05/01/88
Description:
This SLS corrects problem with cron that caused it to incorrectly run jobs
twice, or not run them at all.
===========================================================================
Page 10 XENIX Operating System Support Level Supplements as of 11/30/90
===========================================================================
SLS #xnx076 Logger Supplement
For SCO XENIX version: 2.2.1 to 2.2.3 machine: 386AT
Available on: 48tpi, 135tpi
Submitted on: 03/01/88
Description:
Corrects the problem that gives the error "logger error - bad
address (errno = 14)" when going into multiuser mode.
===========================================================================
SLS #xnx074 MS-BASIC Compatibility
For SCO XENIX version: 2.2.2 to 2.2.3 machine: 386AT
Available on: 48tpi
Submitted on: 02/01/88
Description:
Corrects a 286 system call incompatibility that caused certain programs
compiled with the Microsoft BASIC compiler to fail.
===========================================================================
SLS #xnx072 Telebit Modem and uucico
For SCO XENIX version: 2.2.0 to 2.2.3 machine: n286
Available on: 96tpi, 135tpi
Submitted on: 02/01/88
Description:
Provides a dial program for the Telebit Trailblazer and Racal-Vadic
9600 baud modems. This includes a version of uucico and cu that
accept speeds up to 38400 baud.
===========================================================================
SLS #xnx071 Mountain QIC-02 Tape Driver
For SCO XENIX version: 2.2.0 machine: n286
Available on: 48tpi
Submitted on: 02/01/88
Description:
Provides support for the Mountain QIC-02 tape drive on AT class
machines.
===========================================================================
SLS #xnx059 Terminfo Database
For SCO XENIX version: 2.2.1 to 2.2.3 machine: n286
Available on: 48tpi
Submitted on: 09/01/87
Description:
Corrects a problem with the terminfo compiler, tic(C), which
produces incorrect compiled terminfo descriptions for some terminals
===========================================================================
Page 11 XENIX Operating System Support Level Supplements as of 11/30/90
===========================================================================
SLS #xnx057 Large Disk Bad Track
For SCO XENIX version: 2.2.1 to 2.2.3 machine: n286
Available on: 48tpi
Submitted on: 09/01/87
Description:
Corrects a problem with badtrk(C) that caused the error message
"couldn't malloc" when scanning large hard disks.
===========================================================================
SLS #xnx030 cu(C) Lock Files
For SCO XENIX version: 2.2.0 to 2.2.3 machine: n286
Available on: 48tpi
Submitted on: 02/01/87
Description:
Corrects a problem that caused cu(C) to remove lock files when it
shouldn't.
===========================================================================
SLS #xnx002 sort(C) Supplement
For SCO XENIX version: 2.2.0 to 2.2.3 machine: n286
Available on: 48tpi
Submitted on: 02/01/87
Description:
Corrects problems with sorting floating point numbers, and correctly
handling null characters in its input.
===========================================================================
Page 12 UNIX Operating System Support Level Supplements as of 11/30/90
===========================================================================
SLS #unx251 SCO UNIX Maintenance Disk Release 1.0
For SCO UNIX version: 3.2.0 V2 machine: 386GT
Available on: 48tpi, 135tpi
Submitted on: 09/01/90
Description:
This Support Level Supplement corrects problems with plock(), 14 character
directories, and the file system name cache.
===========================================================================
SLS #unx235 Custom Update
For SCO UNIX version: 3.2.0 machine: U386
Available on: 48tpi, 135tpi
Submitted on: 07/01/90
Description:
This SLS updates the binaries: tar, compress, uncompress, and idtune on SCO
UNIX System V/386 Operating System Release 3.2.0, so that installation of
other SCO products is possible.
===========================================================================
SLS #unx223 SCO Security Supplement
For SCO UNIX version: 3.2.0 to 1.0.0 machine: KU386
Available on: 96tpi, 135tpi
Submitted on: 07/01/90
Description:
This Support Level Supplement addresses problems in SCO UNIX System V 386,
Release 3.2.0 and SCO Open Desktop, Release 1.0.0. Adds "addxusers"
utility to automatically create UNIX users from XENIX password files.
===========================================================================
SLS #unx222 SCO UNIX Irwin Driver
For SCO UNIX/ODT Personal Sys version: 3.2.0 to 1.0.0 machine: KU386
Available on: 48tpi, 135tpi
Submitted on: 08/01/90
Description:
This Support Level Supplement allows SCO UNIX System V/386, release 3.2.0 to
3.2.1 to use Irwin Tape Drives. It addresses problems found in IBM PS/2
machines (model 50,60 and 80).
===========================================================================
SLS #unx221 X Select and Networking Library
For SCO ODT Personal System version: 1.0.0 machine: n386
Available on: 96tpi, 135tpi
Submitted on: 06/01/90
Description:
This Support Level Supplement provides correct functionality for the X system
calls XtAddInput and XtAppAddInput. This SLS corrects problems with the
linking of X11 and networking libraries.
===========================================================================
Page 13 UNIX Operating System Support Level Supplements as of 11/30/90
===========================================================================
SLS #unx220 Hayes V-Series Modem Support Module
For SCO UNIX/XENIX version: 2.3 to 3.2.0 machine: n286
Available on: 96tpi, 135tpi
Submitted on: 08/01/90
Description:
This Support Level Supplement adds Hayes V-Series 9600 modem support to SCO
Operating Systems.
===========================================================================
SLS #unx217 ODT-DOS/Sio
For SCO ODT Personal System version: 1.0.0 machine: 386GT
Available on: 96tpi, 135tpi
Submitted on: 05/10/90
Description:
This SLS allows the use of multiple ports on dumb serial multiport boards. It
also allows a serial mouse to be attached to dumb multiport boards.
===========================================================================
SLS #unx208 WD7000 Support Level Supplement
For SCO ODT Personal System version: 3.2.1 to 1.0.0 machine: 386GT
Available on: 96tpi, 135tpi
Submitted on: 07/01/90
Description:
This Support Level Supplement allows the SCO Open Desktop Personal System to
be installed on machines with the WD7000 SCSI Host Adapter.
===========================================================================
SLS #unx204 Logitech Busmouse Driver
For SCO UNIX/XENIX version: 2.3.2 to 3.2.0 machine: n386
Available on: 96tpi, 135tpi
Submitted on: 05/01/90
Description:
This Support Level Supplement corrects the Logitech busmouse
initialization problem.
===========================================================================
SLS #unx194 Usenet News
For SCO UNIX version: 3.2.0 machine: U386
Available on: 96tpi, 135tpi
Submitted on: 03/01/90
Description:
This Support Level Supplement contains version B release 2.11 of the
Usenet News software and release notes patchlevel 40, compiled to run
UNIX
===========================================================================
Page 14 UNIX Operating System Support Level Supplements as of 11/30/90
===========================================================================
SLS #unx186 Adaptec 1640 Supplement
For SCO UNIX version: 3.2.0 machine: 386MC
Available on: 135tpi
Submitted on: 01/01/90
Description:
This Support Level Supplement allows the installation of SCO UNIX System V/
386 OS Release 3.2.0 on MCA machines with the Adaptec 1640 SCSI controller.
===========================================================================
SLS #unx162 Unix Utility Update
For SCO UNIX version: 3.2.0 machine: 386GT
Available on: 96tpi, 135tpi
Submitted on: 03/01/90
Description:
This Support Level Supplement (SLS) unx162 repairs 8 bit parallel port
problem, adds robustness to SCSI drivers and fixes miscellaneous
utilities.
===========================================================================
Page 15 Languages and Development Support Level Supplements as of 11/30/90
===========================================================================
SLS #lng244 2.3.1 Development System Supplement
For SCO XENIX Development Sys version: 2.3.1 machine: n386
Available on: 96tpi, 135tpi
Submitted on: 08/01/90
Description:
This Support Level Supplement contains new 286 and 386 C compiler passes and
event libraries and new Incremental Loader (ldr) for SCO XENIX Development
System, Release 2.3.1.
===========================================================================
SLS #lng238 /lib/ldr Support Level Supplement
For SCO UNIX/XENIX Dev Sys version: 2.3.0 to 3.2.0 machine: n386
Available on: 48tpi, 135tpi
Submitted on: 07/01/90
Description:
This Support Level Supplement addresses problems where the incremental loader
fails to link modules which have static functions declared.
===========================================================================
SLS #lng230 PC NFS
For SCO NFS/ODT Personal Syst version: 1.1.0 to 1.0.0 machine: U386
Available on: 48tpi, 135tpi
Submitted on: 07/01/90
Description:
This Support Level Supplement provides NFS server capability for DOS NFS
products.
===========================================================================
SLS #lng227 TCP/ip Driver Supplement
For SCO TCP/IP/ODT Personal S version: 1.1.1 machine: KU386
Available on: 48tpi, 135tpi
Submitted on: 07/01/90
Description:
This Support Level Supplement replaces the icmp,tcp,cp and udp protocol
drivers. It also contains a new /etc/cpd binary, which prevents unwanted
network broadcasts. Applicable only to SCO TCP/IP for SCO UNIX or ODT PS.
===========================================================================
SLS #lng225 International Crypt SLS
For SCO UNIX Development Syst version: 3.2.0 machine: U386
Available on: 48tpi, 135tpi
Submitted on: 07/01/90
Description:
This Support Level Supplement provides the International Crypt Library, and
may be shipped to customers outside of the Continental United States.
[Revision B]
===========================================================================
Page 16 Languages and Development Support Level Supplements as of 11/30/90
===========================================================================
SLS #lng218 ODT-NET (NFS) Serialization
For SCO NFS/ODT Personal Syst version: 1.0.0 machine: U386
Available on: 96tpi, 135tpi
Submitted on: 05/10/90
Description:
This Support Level Supplement (SLS) provides NFS Server capability for the
SCO Open Desktop Personal System Release 1.0.0.
===========================================================================
SLS #lng190 SCO Xenix/Unix Crypt Support
For SCO UNIX/XENIX version: 2.2.3 to 3.2.0 machine: n386
Available on: 96tpi, 135tpi
Submitted on: 02/01/90
Description:
This Support Level Supplement (SLS) provides crypt libraries and editor
binaries for SCO XENIX and UNIX Operating Systems. This supplement
obsoletes lng073. May be shipped to domestic destinations only.
===========================================================================
SLS #lng161 SCO UNIX Dev Sys Utilities
For SCO UNIX Development Syst version: 3.2.0 machine: n386
Available on: 48tpi, 135tpi
Submitted on: 12/01/89
Description:
This SLS provides newer versions of the SCO UNIX Development System utilities
which include cvtcoff, cvtomf, ar, ld, nm, size, strip, sdb, prof, ranlib,
and a new libm.a math library enhanced for speed.
===========================================================================
SLS #lng090 XPG2 Support Level Supplement
For SCO UNIX Development Syst version: 3.2.0 machine: n386
Available on: 96tpi
Submitted on: 07/01/90
Description:
This Support Level Supplement allows SCO UNIX System V 386 Release 3.2.0
to make it XPG2 complient.
===========================================================================
SLS #lng088 HP 7475A Plotter Supplement
For SCO CGI version: 1.1.0 machine: n286
Available on: 96tpi, 135tpi
Submitted on: 10/01/89
Description:
This Support Level Supplement corrects handshaking problems with the HP
plotter agent.
===========================================================================
Page 17 Languages and Development Support Level Supplements as of 11/30/90
===========================================================================
SLS #lng084 LPI-COBOL Update rev. 05.65.00
For LPI-COBOL version: 05.41.00 to 05.61.00 machine: n386
Available on: 96tpi, 135tpi
Submitted on: 03/01/89
Description:
This supplement includes enhancements to the compiler, support for alternate
character sets, improvements on the ACCEPT command's capabilities, & the SORT
statement now processes files with record sizes exceeding 1019 characters.
===========================================================================
SLS #lng083 LPI-PASCAL Update 02.11.00
For LPI-PASCAL version: 02.08.00 to 02.10.00 machine: n386
Available on: 96tpi, 135tpi
Submitted on: 06/01/89
Description:
This Support Level Supplement improves the compiler so that it now correctly
compiles external function definitions.
===========================================================================
SLS #lng081 LPI-BASIC Update 02.12.00
For LPI-BASIC version: 02.07.02 to 02.09.02 machine: 386AT
Available on: 96tpi, 135tpi
Submitted on: 02/01/89
Description:
This supplement has the following enhancements: MODE2 in open stmnt is now
case insensitive. Tabbing past the margin has been fixed. Precision problems
of single float data types have been corrected.
===========================================================================
SLS #lng077 LPI-PL/1 Update 03.05.20
For LPI-PL/1 version: 03.05.10 machine: n386
Available on: 96tpi, 135tpi
Submitted on: 12/01/88
Description:
Lng077 updates previous versions of LPI-PL/1 to version 03.05.20. Problems
corrected include opening STREAM OUTPUT FILES with the -APPEND option, and
using SUBSTR as a pseudo-variable with an aligned bit argument.
===========================================================================
SLS #lng062 Device Driver Documentation
For SCO XENIX Development Sys version: 2.2.0 to 2.2.3 machine: n386
Available on: Documentation
Submitted on: 10/01/87
Description:
Documentation describing additional device driver support routines
provided by the SCO XENIX 386 kernel.
===========================================================================
Page 18 Languages and Development Support Level Supplements as of 11/30/90
===========================================================================
SLS #lng061 Development System Update
For SCO XENIX Development Sys version: 2.2.0 machine: 286
Available on: 96tpi, 135tpi
Submitted on: 09/01/87
Description:
Enhancements and fixes to the SCO XENIX Release 2.2.0 Development
System for 286-based machines only. Order lng060 for 386-based machines.
===========================================================================
SLS #lng060 Development System Update
For SCO XENIX Development Sys version: 2.2.0 machine: 386
Available on: 96tpi, 135tpi
Submitted on: 09/01/87
Description:
Enhancements and fixes to the SCO XENIX Release 2.2.0 Development
System, for 386-based machines only. Order SLS number xnx061 for 286
-based machines.
===========================================================================
SLS #lng056 Shared Data
For SCO XENIX Development Sys version: 2.2.0 to 2.2.1 machine: 286AT
Available on: 48tpi
Submitted on: 09/01/87
Description:
Corrects several problems with shared data and shared memory in
SCO XENIX Releases 2.2.0 and 2.2.1.
===========================================================================
SLS #lng044 Mouse Driver Example
For SCO XENIX Development Sys version: 2.2.0 to 2.2.1 machine: n286
Available on: 48tpi
Submitted on: 07/01/87
Description:
Example mouse device driver. This is for information only, it is
not supported.
===========================================================================
SLS #lng013 DOS Floating Point Libraries
For SCO XENIX Development Sys version: 2.1.3 machine: 286AT
Available on: 48tpi
Submitted on: 02/01/87
Description:
Adds DOS floating point libraries used by the -FP flag that were
omitted from Release 2.1.3 of the Development System.
===========================================================================
Page 19 Applications Support Level Supplements as of 11/30/90
===========================================================================
SLS #app203 New Communications File
For SCO Multiview Desktop version: 1.0.0 machine: n386
Available on: 48tpi, 135tpi
Submitted on: 05/01/90
Description:
This Support Level Supplement (SLS) contains a new mvw_ixsru file for
JSB Multiview Desktop 1.0.0.
===========================================================================
SLS #app198 International Keyboard Supplement
For Microsoft Word version: 5.0.0 machine: n386
Available on: 96tpi, 135tpi
Submitted on: 03/01/90
Description:
This Support Level Supplement (SLS) is intended for users with non-english
keyboards. It also includes a fix for the existing MS Word 5.0.0 product
regarding random "signal 11 received" word terminated error.
===========================================================================
SLS #app196 Fox/Pro Postscript Translator
For SCO FoxBASE+ version: 2.0.0 to 2.1.1 machine: OTHER
Available on: 135tpi, QIC Tape
Submitted on: 03/01/90
Description:
This Support Level Supplement (SLS) app196 includes ASCII to postscript
filter for SCO Foxbase+ 2.1.1 and SCO Professional 2.0.0 on the Sun
Operating System.
===========================================================================
SLS #app189 MS Word Printer Supplement
For Microsoft Word version: 5.0.0 machine: n386
Available on: 96tpi, 135tpi
Submitted on: 02/01/90
Description:
This Support Level Supplement (SLS) provides additional printer files (.prx)
not included in the MS Word 5.0.0 package.
===========================================================================
SLS #app187 SCO FoxBASE+ for the IBM/RT Form Supplement
For SCO FoxBASE+ version: 1.0.4 machine: IBMRT
Available on: 96tpi
Submitted on: 03/01/90
Description:
This Support Level Supplement (SLS) solves some of the problems present
in porting form files from other Operating Systems to the IBM/RT.
===========================================================================
Page 20 Applications Support Level Supplements as of 11/30/90
===========================================================================
SLS #app147 SCO FoxBASE+ 1.0.4c SLS for the IBMRT
For SCO FoxBASE+ version: 1.0.4c machine: IBMRT
Available on: 96tpi
Submitted on: 09/01/89
Description:
This Support Level Supplement corrects problems such as null date fields
and illegal seek errors with memo fields.
===========================================================================
SLS #app099 MS WORD termdesc/ipa Supplement
For Microsoft Word version: 3.0.1 to 3.0.3 machine: n286
Available on: 48tpi, 135tpi
Submitted on: 06/01/89
Description:
This Support Supplement corrects some problems found in MS WORD Release
3.0.1 through 3.0.3 with the vt100 and wyse50 termdesc entries, and with
the interactive printing. It also provides support for the IBM 3151 terminal.
===========================================================================
SLS #app094 /usr/lib/foxplus/termcap for AT&T 3B2
For SCO FoxBASE+ version: 1.0.4 machine: ATT3B
Available on: 96tpi
Submitted on: 03/01/89
Description:
This copy of /usr/lib/foxplus/termcap replaces the termcap originally shipped
with SCO FoxBASE+, release 1.0.4 for the AT&T 3B2.
===========================================================================
SLS #app093 386 PI0 Libraries
For SCO uniPATH SNA-PI0 version: 1.0.0 machine: n386
Available on: 96tpi, 135tpi
Submitted on: 02/01/89
Description:
This Support Level Supplement provides 386 libraries for the SCO uniPATH
Programmatic Interface 0 Mainframe Communication Package.
===========================================================================
SLS #app077 Memory Use Improvements
For Informix version: 3.30.12y machine: n286
Available on: 48tpi
Submitted on: 03/01/88
Description:
This SLS corrects problems with perform (and other Informix utilities)
running out of memory.
===========================================================================
Page 21 Applications Support Level Supplements as of 11/30/90
===========================================================================
SLS #app042 cron(C), at(C) Supplement
For SCO FoxBASE version: 1.0.1 to 1.0.3 machine: n286
Available on: 48tpi
Submitted on: 07/01/87
Description:
This SLS allows SCO FoxBASE to work correctly when called by cron(C) or at(C
This does not apply to SCO FoxBASE+.
===========================================================================
SCO Support Level Supplements Available via UUCP
Selected Support Level Supplements (SLS) are available for anonymous
UUCP transfer. Anonymous UUCP means that anyone who knows the phone number
and the login name can access. The login name to use is "uusls" (the fourth
character is the letter "l" rather than the numeral "1"), and there is no
password. The system name is "sosco". There are two modems available: a
2400-baud modem at (408) 425-3502, and a Telebit Trailblazer 9600-baud modem
at (408) 429-1786. Users should be familiar with UUCP transfers, and must
set up their system for UUCP transfer as described in the chapter "Building
a Remote Network with UUCP" in the SCO System Administrator's Guide.
All files reside in the directory /usr/spool/uucppublic/SLS. The first file
that should be requested is /usr/spool/uucppublic/SLS/info. This file
contains the names of all the other files that are available, and
instructions on how to install the SLS's once they have been received.
The info file will be updated as new SLS's are added, so customers
can periodically obtain this file to check for SLS's that have been
added to the system.
Not all SLS's will be available for uucp. SLS's that would not be
appropriate are those which correct problems with a product installation,
or consist of a substantial portion of a product.
--
bill davidsen (davidsen at crdos1.crd.GE.COM -or- uunet!crdgw1!crdos1!davidsen)
VMS is a text-only adventure game. If you win you can use unix.
More information about the Comp.unix.sysv386
mailing list