System dies in ISC 2.2

[Steintor Bjarnason]

>I have ISC 2.2 that was upgraded from 2.0.2, and when I am in vpix.  For
>some reason my computer just dies, and goes into the reboot phase.
>I get no message.  The screen goes blank for an instant, as if I had hit
>reset on my computer, and then starts checking ram on startup and reboots.

>Anybody seen this before.  This has happend to me about three times now.

>Chuck

I had this same problem with vpix and ISC 2.2 when I was trying to get
my NOVELL NE/2 ethernet adapter to work with vpix as a DDA device.  
I made the mistake to configure the NE/2 card for interrupt 2 
AND told vpix that the card was using interrupt 2.  After that I had 
the same problem as you describe, when I started vpix the screen went 
black and the computer rebooted.  
The solution was to configure the DDA device for the NE/2 card as using
interrupt 9 and everything worked after that.

The problem is probably that the DDA driver was receiving all the extended
interrupts (8-15) as IRQ 2 and promptly decided to reboot the computer.

Hope this helps !

Steintor
-- 
Steinthor Bjarnason       Internet: stb at isbank.is
Islandsbanki h.f.         UUCP:     {mcsun,sunic,uunet}!isgate!isbank.is!stb
Kringlan 7                Phone:    354-1-608000
155 Reykjavik, Iceland    Fax:      354-1-679037