Getty for ISC/Telebit T-2500 w/autobaud via the CONNECT msg?

[karln at uunet.uu.net]

In article <1991Jun15.030807.28565 at pegasus.com> richard at pegasus.com (Richard Foulk) writes:
>Does anyone have a getty working with ISC Unix and Telebit modems
>that will change the line baud rate according to the `CONNECT xxxx'
>message from the modem?
>
>I'm hoping to get something like this working on ports that are
>used bi-directionally via the kernel/driver based locking scheme,
>not the uugetty approach.  Is this even possible?
>
>(I don't want to lock the port speed on the Telebits because that
>breaks some nice features on programs like vi, etc., that adapt
>their display to the speed of the connection.)
>
	Despite the last comment, I HIGHLY reccomend locking
the speed of the modem. I know someone that tried for a week
or two trying to get the T2500 to work like the manual shows, 
but never really got it off the ground. Furthermore I cannot 
picture were getty is going to get the connect string from, 
but then again I've always gone the locked speed route. The
connect string always seemed to be more for using cu
or some such dialout. I'm not even sure that the modem will
issue a connect string when someone calls in. There should be
a way to query it though. I'll look into it a bit more this 
weekend, but I have to say .. I would just lock the port.
I've seen 9600 baud modems for $179 US. At that, every one
should have one .. (excepting of course students :-)


-- 
***********************************************************************
| Karl Nicholas             | A million monkeys in a million years    |
| karln!karln at uunet.uu.net  | did write Shakespear, we evolved ...    |
***********************************************************************