Source of modem connect message (was Re: Getty for ISC w/autobaud)

[Greg Andrews]

In article <1991Jun15.154304.25987 at uunet.uu.net> karln!karln at uunet.uu.net (Karl Nicholas) writes:
>
>Furthermore I cannot picture were getty is going to get the connect 
>string from, but then again I've always gone the locked speed route. 
>  [...]
>I'm not even sure that the modem will issue a connect string when someone 
>calls in. There should be a way to query it though. I'll look into it a 
>bit more this weekend, but I have to say .. I would just lock the port.
>

The modem can indeed issu a connect message (result code) on dial-in.

Take a look at the description of the Q0 setting, which is the modem's
default setting when it comes from the factory.


> Karl Nicholas 
> karln!karln at uunet.uu.net

-- 
 .------------------------------------------------------------------------.
 |  Greg Andrews   |       UUCP: {apple,amdahl,claris}!netcom!gandrews    |
 |                 |   Internet: gandrews at netcom.COM                      |
 `------------------------------------------------------------------------'