X386 - Tseng Labs ET4000-based video card question

[Thomas Roell]

>	25.175 28.322        36.000 40.000 44.900       62.000
>However, "clock ET4000" tells me that they are:
>	25.2   28.3   32.5   36.0   40.0   44.9   55.6  64.4
>
>I do not have a lot of faith in the manual because it is so poorly written
>but it seems like numbers would be hard for them to get wrong. Any comments
>or suggestions?

I would rather trust clock.exe. clock.exe just programms the videochip for
a common display mode, and the counts the time needed a horizontal frame.
Every number counted is compared to the wellknown of the 28.322 quartz.
But throught the limiation of this method only about 3 numbers are sigificant.
At higher quartzes there may be even higher errors +- 0.5. But clock.exe
definitively shows all frequencies available.

- Thomas
--
_______________________________________________________________________________
E-Mail (domain):	 roell at lan.informatik.tu-muenchen.de
UUCP (if above fails):   roell at tumult.{uucp | informatik.tu-muenchen.de}
famous last words: "diskspace - the final frontier..."