Problems with Floppies and SCO XENIX-386 *SOLVED*

[nat-3 System Administrator]

Hello --

	Thanks to those who responded to my problem with my floppy
disk drives.  You were right:  I needed to move my VGA card to an
8-bit slot.

	Paul Zola at SCO responded and said that he knew of no problems
with the Paradise card, so let me correct him.  I am using a Paradise
1024 card and had to move it to an 8-bit slot.  Setting the DIP switch
to force using an 8-bit BIOS is *NOT* enough.  Fortunately, I do not
seem to be experiencing any speed problems when I run even 800x600
graphics applications.  Perhaps this tidbit could be stashed in SCO's
repository of wisdom.

					Thanks again,

						John
-- 
John R. Meyer			Path:   ...!uunet!nat-3!root
10208-C Ashbrooke Ct.		Domain: root at nat-3.UUCP
Oakton, VA  22124-3106		Phone:  (703) 281-5157 (H)
USA					(703) 802-1872 (O)