Bugs in SCO XENIX uucico?
Florida State U./ISPA
ralph at unifybb.uucp
Wed Aug 22 13:00:20 AEST 1990
I have problem which looked simple at first but got
complicated rather quickly. I have a 386 machine running SCO Xenix.
The machine is connected to a terminal server via an ethernet cable
to provide access to the Xenix box to several users. This
configuration was rather simple to install.
What I want to do now is use one of the terminal ports on the
terminal server and install a printer on it (see figure.) A simple
solution is to configure the scheduler so that it sends its output to
the /dev/tty? to which the printer is connected on the terminal server.
Scenario:
--------- term1 term2 term(n) *
\ \ / ___ * printer *
\ \ | / *
|| | |
+----------+
| Racal |
| Terminal |
| Server |
+-----+----+
| Ethernet cable
<------+-----------------------+-------------------------->
|
+----+----+
| SCO | ( Using Excelan Network Software )
| Xenix |
| box |
+---------+
This actually verks. BUT, I have to first, hook up a
terminal to the port that will be used by the printer and to logon to
Xenix box. Second, I have to remove the terminal from the port and
replace it with printer. And third, I have to reassign the device to
which the printer scheduler sends its output so that it uses the same
/dev/tty? as the printer. Quite a mess, eh? Exactly!
I've also tried making the printer a remote printer by
making the port for the printer on the terminal server a slave port
and assigning a network address to the port. BUT, I can't quite make
it work though, ack!
I'm baffled. Any ideas, anyone? huh? huh?
Mailing address
Reply to this message...
BNetRB@%FSU.BITNET at vtvm1.cc.vt.edu Internet
BNetRB at RAI.CC.FSU.EDU BITNet
More information about the Comp.unix.xenix
mailing list