August 1988 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]

Starting: Mon Aug 1 00:03:06 AEST 1988
Ending: Wed Aug 31 13:24:49 AEST 1988
Messages: 306

• Clock.shar / revised nbs_time   Sanford 'Sandy' Zelkovitz
• Bell Tech Unix Review #2   James Van Artsdalen
• Unbundling - we all do it, so let's stop complaining   Phil C. Miller
• 2 ESDI drives, and misc. flames   John M. Sully
• LISP and Microport V/AT   Tom Frauenhofer
• LISP and Microport V/AT   Tom Frauenhofer
• Request for info on converting DOS to Unix on ATs   Eric Johnson
• Bell Tech Unix Review #2   Karl Denninger
• catie/patch01 -- fixes to catie (Configure Ansi TermInfo Entries)   Rick Wargo
• Unbundling - we all do it, so let's stop complaining   John Plocher
• catie/patch02 -- Graphics chars fix for catie   Rick Wargo
• Bell Tech Unix Review #2   Michael Grenier
• Unbundling - we all do it, so let's stop complaining   John C. Rossmann
• Clock.shar update number 1   Sanford 'Sandy' Zelkovitz
• Speed Change Program for AT clones?   Wolf N. Paul
• Bell Tech Unix Review #2   Larry Williamson
• Bell Tech 386 SysVr3   id for use with uunet/usenet
• Bell Tech 386 SysVr3   Andrew Valencia
• Unbundling - we all do it, so let's stop complaining   Jon Zeeff
• WD1006 Controller on 386/ix   Chip Salzenberg
• LISP and Microport V/AT   Rob Peck
• Bell Tech Unix Review #2   William E. Davidsen Jr
• Bell Tech 386 SysVr3   William E. Davidsen Jr
• Unbundling - we all do it, so let's stop complaining   Michael T Sullivan
• Unbundling - we all do it, so let's stop complaining   Eric Varsanyi
• X-window drivers   Innovus Inc.
• Bell Tech System V   Charles Hedrick
• catie/patch01 -- fixes to catie (Configure Ansi TermInfo Entries)   Derek E. Terveer
• Anxiously awaiting ksh-e   Michael J. Young
• Bell Tech Unix Review #2   karl lehenbauer#
• Bell Tech 386 SysVr3   William R. Pearson
• Sticky Bits (was: Re: WD1006 ...)   John F. Haugh II
• Bell Tech 386 SysVr3   John Owens
• WD1006 Controller on 386/ix   Andrew Valencia
• Bell Tech Unix Review #2   William E. Davidsen Jr
• Bell Tech 386 SysVr3   Peter da Silva
• Bell Tech System V   John Plocher
• Unbundling - we all do it, so let's stop complaining   Bill Kennedy
• Bell Tech 386 SysVr3 (really a put-down of Xenix)   Greg Woods
• Bell Tech 386 SysVr3   Greg Woods
• Bell Tech Unix Review #2   Jon Zeeff
• Unbundling - we all do it, so let's stop complaining   Pete Holsberg
• Bell Tech 386 SysVr3   Mike Howard
• Bell Tech 386 SysVr3 (really a put-down of Xenix)   Steve Dyer
• FP PROBLEM RESOLUTION   Steve Neighorn
• serial printers under microport 386   Randy Menna
• 2 ESDI drives, and misc. flames   steve at cdp.UUCP
• Xenix reliability (Was: Re: Bell Tech 386 SysVr3)   Karl Denninger
• Bell Tech 386 SysVr3 (really a put-down of Xenix)   Sanford 'Sandy' Zelkovitz
• Disk tables in ROM suck (was Re: Bell Tech Unix Review #2)   Larry Campbell
• Unbundling - we all do it, so let's stop complaining   karl
• Bell Tech System V   Charles Hedrick
• Unbundling - we all do it, so let's stop complaining   Jon Zeeff
• Need INFO about possibilities of IBM Mainframe connection   Andrew Valencia
• Tape drivers for DOS   Dominick Samperi
• serial printers under microport 386   David F. Carlson
• /etc/shmcreate, how does it do it?   Larry Williamson
• Xenix reliability (Was: Re: Bell Tech 386 SysVr3)   Earl H. Kinmonth
• More Microport Bugs   Dominick Samperi
• FP PROBLEM RESOLUTION   Rick Richardson
• catie/patch01 -- fixes to catie (Configure Ansi TermInfo Entries)   Rick Richardson
• Unbundling - we all do it, so let's stop complaining   Rick Richardson
• serial printers under microport 386   Greg Hackney
• Bell Tech. Hubcard and Microport 286 V/AT   Mark Zenier
• Bell Tech 386 SysVr3 (really a put-down of Xenix)   Greg Woods
• Bell Tech 386 SysVr3 (really a put-down of Xenix)   Greg Woods
• Bell Tech 386 SysVr3   Mike Clarkson
• Bell Tech 386 SysVr3   Greg Woods
• Bell Tech. Hubcard and Microport 286 V/AT   John C. Rossmann
• Bell Tech 386 SysVr3 (really a put-down of Xenix)   John Plocher
• /etc/shmcreate, how does it do it?   John Plocher
• Bell Tech 386 SysVr3   John Plocher
• /etc/shmcreate, how does it do it?   wtr at moss.ATT.COM
• Far pointers and 386   Brad Templeton
• gcc 1.25 under microport sysV/386   Luis Soltero
• X-window drivers   tucker at urbsdc.Urbana.Gould.COM
• Xenix reliability (Was: Re: Bell Tech 386 SysVr3)   John F. Haugh II
• Bell Tech 386 SysVr3   Rick Richardson
• Xenix/UNIX/Weirdix/...   Peter da Silva
• Support matters   Bill Kennedy
• Support matters   Dominick Samperi
• /etc/shmcreate, how does it do it?   Derek E. Terveer
• Anybody heard of Thoroughbred Basic?   Brian Beattie
• Bell Tech Unix Review #2   Stacy L. Millions
• Support matters   Karl Denninger
• RFS under Bell Tech Sys V/386   Karl Lehenbauer
• Support matters   William Vajk
• Bell Tech 386 SysVr3   Howard Leadmon
• /etc/shmcreate, how does it do it?   Larry Williamson
• HELP! Floating Point Problems   Dimitri Rotow
• serial printers under microport 386   John M. Sully
• Uport Graphics Library by D. Lewis   Benyukhis
• Support matters   Jeff Bowles
• serial printers under microport 386   Keith Hankin
• Bell Tech. Hubcard and Microport 286 V/AT   Keith Hankin
• /etc/shmcreate, how does it do it?   Keith Hankin
• Xenix/UNIX/Weirdix/...   Andrew Valencia
• Support matters   Bill Kennedy
• Support matters (no shit!)   Burt Janz
• Xenix reliability (Was: Re: Bell Tech 386 SysVr3)   Greg Woods
• Xenix/UNIX/Weirdix/...   Greg Woods
• Bell Tech 386 SysVr3 (really a put-down of Xenix)   Eric Pederson
• RAM disk driver   Bill Kennedy
• Support matters   Wolf N. Paul
• Bringing up GNU C on the 386   James Van Artsdalen
• compress.c & GNU C 1.25   James Van Artsdalen
• compress.c & GNU C 1.25   James Van Artsdalen
• Bell Tech 386 SysVr3   wtr at moss.ATT.COM
• Anybody heard of Thoroughbred Basic?   Joe Bob Willie
• ad-hominem attacks go to hell   David F. Carlson
• Newsgroup names (Re: Bell Tech 386 SysVr3)   Peter da Silva
• Support matters   Howard Leadmon
• Xenix reliability (Was: Re: Bell Tech 386 SysVr3)   Andrew Valencia
• Driver for console and the like   Jeff Bowles
• Bell Tech 386 SysVr3   Dimitri Rotow
• X-window drivers   John Plocher
• HELP! Floating Point Problems   James Van Artsdalen
• Bell Tech 386 SysVr3   John Plocher
• Support matters   Keith Hankin
• Xenix reliability (Was: Re: Bell Tech 386 SysVr3)   John F. Haugh II
• Fix for GNU C 1.25 signed extension   James Van Artsdalen
• Anybody heard of Thoroughbred Basic?   Brandon S. Allbery
• ad-hominem attacks go to hell   Ken Seefried iii
• Bell Tech 386 SysVr3 (really a put-down of Xenix)   Greg Woods
• Support matters   william vajk
• Support matters   fred at cdin-1.UUCP
• Support matters (no shit!)   samperi at djs.UUCP
• More RFS questions: advertising subdirectories   Karl Lehenbauer
• Support matters   tanner at ki4pv.UUCP
• Support matters   Dominick Samperi
• Group names   rja
• Bell Tech 386 SysVr3 (really a put-down of Xenix)   Haller
• More RFS questions: advertising subdirectories   Jeff Bowles
• serial ports on the '286   Jon Zeeff
• Wanted UNIX SCSI/SASI driver   Jonathan J. Jefferies
• Disk drives   Chip Salzenberg
• HDB uucp and uport SV/AT (have you tried it?)   Larry Williamson
• serial ports on the '286   James Van Artsdalen
• ad-hominem attacks go to hell   Leroy Dorman
• Xenix Question ( was: Re: Bell Tech 386 SysVr3 (really a put-down of Xenix))   Ken Seefried iii
• Disabling 'date' prompt in SysV/At   Tim Evans
• Bell Tech 386 SysVr3 (really a put-down of Xenix)   David Farber
• serial ports on the '286   David F. Carlson
• Support matters   Barnacle Wes
• serial ports on the '286   James Van Artsdalen
• Disabling 'date' prompt in SysV/At   Wolf N. Paul
• HDB uucp and uport SV/AT (have you tried it?)   Wolf N. Paul
• Bell Tech 386 SysVr3   Rick Richardson
• serial ports on the '286   Rick Richardson
• serial ports on the '286   Rick Richardson
• Disabling 'date' prompt in SysV/At   John Gayman
• Disabling 'date' prompt in SysV/At   John Plocher
• more gcc diffs   James Van Artsdalen
• Support matters   william vajk
• serial ports on the '286   Jon Zeeff
• serial ports on the '286   pri=-10 Stuart Lynne
• Support matters   Doug Salot
• Bell Tech 386 SysVr3   Howard Leadmon
• FP PROBLEM RESOLUTION   Steve Neighorn
• Newsgroup content   John Plocher
• Xenix reliability (Was: Re: Bell Tech 386 SysVr3)   Peter da Silva
• Disk drives   Andrew Valencia
• Disabling 'date' Prompt in SysV/AT--SUMMARY   Tim Evans
• Bell Tech 386 SysVr3   John Owens
• Support matters   Jeff Bowles
• Bell Tech 386 SysVr3   Brian Cuthie
• call for discussion: how should these U**X/*86 newsgroups be named?   Paul Vixie
• Intel UNIX group   Steve Dyer
• new groups for iX86 unix (was: Bell Tech 386 SysVr3)   Greg Woods
• Xenix reliability (Was: Re: Bell Tech 386 SysVr3)   Greg Woods
• HDB uucp and uport SV/AT (have you tried it?)   Wolf N. Paul
• uport BBS (was HDB uucp and uport SV/AT (have you tried it?))   Pete Holsberg
• new groups for iX86 unix (was: Bell Tech 386 SysVr3)   Steve Dyer
• serial ports on the '286   Jon Zeeff
• CURSES keypad - terminfo problem   Merlin Wilkerson
• Support matters   John Peters
• Need PC Pursuit software   Bruce A. Kern
• new groups for iX86 unix (was: Bell Tech 386 SysVr3)   rja
• Second disk drive, partitions   The Wizard of UN*X
• V/286==merge problem   rohan kelley
• 3.5", 1.44 MB floppy disk driver for uport V/286   Lennartz Elektronik
• HDB uucp and uport SV/AT (have you tried it?)   Phil Hughes
• new groups for iX86 unix (was: Bell Tech 386 SysVr3)   Evan Wallace
• Modem I/O   Steven G. Madere
• new groups for iX86 unix (was: Bell Tech 386 SysVr3)   The Beach Bum
• SVR3 console message capturing   Keith Gregoire
• SVR3 console message capturing   Jeff Bowles
• 386 Unix (In)compatibilities Summary   Michael T Sullivan
• SVR3 console message capturing   John Fenk
• Disk drives   Randy Jarrett WA4MEI
• new groups for iX86 unix (was: Bell Tech 386 SysVr3)   Paul Vixie
• call for discussion: how should these U**X/*86 newsgroups be named?   Paul Vixie
• SVR3 console message capturing   Eric Varsanyi
• Disk drives   Rick Richardson
• new groups for iX86 unix (was: Bell Tech 386 SysVr3)   Rick Richardson
• call for discussion: how should these U**X/*86 newsgroups be named?   W. Fred Rump
• new groups for iX86 unix (was: Bell Tech 386 SysVr3)   Wolf N. Paul
• new groups for iX86 unix (was: Bell Tech 386 SysVr3)   Brian Beattie
• AST 4-port under uport /386 v 3.0-2.2L   Keld J|rn Simonsen
• new groups for iX86 unix (was: Bell Tech 386 SysVr3)   Chip Salzenberg
• SVR3 console message capturing   WU SHI-KUEI
• new groups for iX86 unix (was: Bell Tech 386 SysVr3)   The Cat in the Hat
• new groups for iX86 unix (was: Bell Tech 386 SysVr3)   The Cat in the Hat
• new groups for iX86 unix (was: Bell Tech 386 SysVr3)   The Cat in the Hat
• SVR3 console message capturing   Joe Bob Willie
• Disk drives   Phil Hughes
• CURSES keypad - terminfo problem   Greg Woods
• 386 Unix (In)compatibilities Summary   Greg Woods
• Disk drives   Rich Sands
• HDB uucp and uport SV/AT (have you tried it?)   John Plocher
• uport BBS (was HDB uucp and uport SV/AT (have you tried it?))   John Plocher
• new groups for iX86 unix (was: Bell Tech 386 SysVr3)   John Plocher
• new groups for iX86 unix (was: Bell Tech 386 SysVr3)   John Plocher
• Modem I/O   John Plocher
• new groups for iX86 unix (was: Bell Tech 386 SysVr3)   Dominick Samperi
• HDB uucp and uport SV/AT (have you tried it?) Yes!   John Plocher
• new groups for iX86 unix (was: Bell Tech 386 SysVr3)   pri=-10 Stuart Lynne
• 3.5", 1.44 MB floppy disk driver for uport V/286   John Plocher
• 386 Unix (In)compatibilities Summary   John Plocher
• I think we have a proposal on our hands (re: intel U**X)   Paul Vixie
• new groups for iX86 unix (was: Bell Tech 386 SysVr3)   Paul Vixie
• dcopy (1M) doesn't work properly on Sys V/386 or Sys V/AT   Karl Lehenbauer
• new groups for iX86 unix   James Van Artsdalen
• GNU C/386 v1.26 bug   James Van Artsdalen
• new groups for iX86 unix (was: Bell Tech 386 SysVr3)   Robert Claeson
• new groups for iX86 unix   John Plocher
• (386) Unix (In)compatibilities Summary   Steven L. Baur
• SVR3 console message capturing   Larry Philps
• new groups for iX86 unix (was: Bell Tech 386 SysVr3)   Derek E. Terveer
• gcc 1.26/80386 patch   James Van Artsdalen
• silly newsgroup stuff...   Ken Seefried iii
• I think we have a proposal on our hands (re: intel U**X)   John Owens
• I think we have a proposal on our hands (re: intel U**X)   Paul Vixie
• I think we have a proposal on our hands (re: intel U**X)   Greg Laskin
• Another Great Renaming?   John Plocher
• silly newsgroup stuff...   Pete Holsberg
• 386 Unix (In)compatibilities Summary   Michael T Sullivan
• I think we have a proposal on our hands (re: intel U**X)   Fred Rump
• I think we have a proposal on our hands (re: intel U**X)   Chip Salzenberg
• PC UNIX SIG MTG: Fiedler & Hunter   hemenway at cdp.UUCP
• help with malloc on microport   coan at cdp.UUCP
• Another Great Renaming?   Bill Wisner
• why we have to keep comp.unix.xenix   Paul Vixie
• comp.unix.sys5-intel   Paul Vixie
• GNU C/386 v1.26 bug fix   James Van Artsdalen
• I think we have a proposal on our hands (re: intel U**X)   John Owens
• call for NOMINATIONS   John Owens
• Another Great Renaming?   Dominick Samperi
• Names   John Plocher
• call for NOMINATIONS   John Plocher
• why we have to keep comp.unix.xenix   Paul Vixie
• why comp.unix.{segment,linear} won't work   Paul Vixie
• why we have to keep comp.unix.xenix   Howard Leadmon
• help with malloc on microport   Charles Hedrick
• I think we have a proposal on our hands (re: intel U**X)   Bruce A. Kern
• Bell Tech 386 SysVr3 (really a put-down of Xenix)   Ronald O. Christian
• everex internal 2400 baud modem under uport 2.3   Brian Beattie
• 386 Unix (In)compatibilities Summary   Richard A. O'Keefe
• AST 4-port under uport /386 v 3.0-2.2L   Wain Dobson
• GNU C 1.26 (80386) - Yet Another Patch   James Van Artsdalen
• Bell Tech 386 SysVr3 (really a put-down of Xenix)   John Owens
• everex internal 2400 baud modem under uport 2.3   Marcio de Carvalho
• call for NOMINATIONS   John Owens
• comp.unix.sys5-intel   Chip Salzenberg
• Bell Tech 386 SysVr3 (really a put-down of Xenix)   The Beach Bum
• help with malloc on microport   John Plocher
• Bell Tech 386 SysVr3 (really a put-down of Xenix)   Fred Rump from home
• AST 4-port under uport /386 v 3.0-2.2L   Lindsay Cleveland
• Bell Tech 386 SysVr3 (really a put-down of Xenix)   Dave Hammond
• call for NOMINATIONS   William E. Davidsen Jr
• help with malloc on microport   coan at cdp.UUCP
• (386) Unix (In)compatibilities Summary   Greg Woods
• 386 Unix (In)compatibilities Summary   Greg Woods
• Unix Release 3.1 (was: new groups for iX86 unix)   Steve Neighorn
• Bell Tech 386 SysVr3 (really a put-down of Xenix)   Pete Rourke
• 386 Unix (In)compatibilities Summary   Barnacle Wes
• why comp.unix.{segment,linear} won't work   Barnacle Wes
• using an above board's serial port   Derek E. Terveer
• everex internal 2400 baud modem under uport 2.3   Wain Dobson
• AT&T 386 UNIX Vr3.1   Bill Kennedy
• Bell Tech 386 SysVr3 (really a put-down of Xenix)   Dr. T. Andrews
• uport questions   Bill Hatch
• AT&T 386 UNIX Vr3.1   John Canning
• AT&T 386 UNIX Vr3.1   Michael Grenier
• AT&T 386 UNIX Vr3.1   Clarence Dold
• uport questions   Greg Hackney
• Bell Tech 386 SysVr3 (really a put-down of Xenix)   Ronald O. Christian
• Unix Release 3.1 (was: new groups for iX86 unix)   Michael T Sullivan
• KA9Q - Compiler error ?   Per Andersson
• AT&T 386 UNIX Vr3.1   Keith Hankin
• uport questions   John Plocher
• uport questions   John Plocher
• VGA with V/AT   Bill Kennedy
• (386) Unix (In)compatibilities Summary   Brian Litzinger
• Bell Tech 386 SysVr3 (really a put-down of Xenix)   Bill Kennedy
• 1600bpi Drive and driver   Pleschutznig Andreas
• PC Token ring network under DosMerge ?   System Administrator
• 3COM 3C501 ethernet driver for V/386   Ken
• AT&T 386 UNIX Vr3.1   William E. Davidsen Jr
• AT&T 386 UNIX Vr3.1   Richard Pettit
• Bell Tech 386 SysVr3 (really a put-down of Xenix)   William E. Davidsen Jr
• AT&T 386 UNIX Vr3.1   Pim Zandbergen
• Couple of Questions   Mitchell Ludwig
• AT&T 386 UNIX Vr3.1   Dominick Samperi
• uport questions   Daniel Senie
• (386) Unix (In)compatibilities Summary   Greg Woods

Last message date: Wed Aug 31 13:24:49 AEST 1988
Archived on: Mon Feb 1 19:43:21 AEST 2016

• Messages sorted by: [ thread ] [ subject ] [ author ]