October 1990 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]

Starting: Mon Oct 1 00:43:15 AEST 1990
Ending: Wed Oct 31 23:31:23 AEST 1990
Messages: 867

• WD1007V + big Maxtor + DOS + UNIX   Pete Holsberg
• Cheap or free auto-shutdown setup (was: Reliability Sys V file sys)   Bill Vermillion
• Here's how to stop shell escapes from vi   Daniel A. Glasser
• Replacement su for SCO Unix   Steve Friedl
• Wanted: Multiple SLIP's on 386/ix !   Petri Helenius
• NEED Xmodem or Zmodem (even Kermit)   theresa
• File Xfer between mainframe and unix via token ring   Phil Scott
• Esix Mailing List   Bill Heiser
• Take out memory to speed up kernel build!?   Tim W Smith
• How Do You Solve the Multi-OS Development Nightmare?   Tim W Smith
• Colorado Memory Systems "Jumbo" tape drive.   Erik Ch. Ohrnberger
• Dumb questions on SCO System V.3.2   Frederick Lin
• Cheap or free auto-shutdown setup (was: Reliability Sys V file sys)   Tim Wright
• vpix under x11r4 under 386/ix 2.02   Thomas Roell
• Sockets in 386/ix   Richard Foulk
• Here's how to stop shell escapes from vi   Eamonn McManus
• WD1007V + big Maxtor + DOS + UNIX   Tom Neff
• Seeking driver for Bell Tech Blit card and SV Rel 4.0   Never Kid A Kidder
• Cheap or free auto-shutdown setup (was: Reliability Sys V file sys)   andrew.d.hay
• AHA1542B & MiniScribe 9380S & The Friggin Floppy Drive   Stephen M. Youndt
• "p ? a : b"   Chip Salzenberg
• Protecting against downloads   Karl Denninger
• SC (Spreadhseet Calculator) for sco Unix sysV 3.2   Ian R. Searle
• Anybody running ISC 2.2 on a 486?   tom hampton
• Does Open Look run over Ethernet?   Steve Friedl
• vpix in xterm under X11R4   3531] Gregg W. Jensen
• Cheap or free auto-shutdown setup (was: Reliability Sys V file sys)   Julian Macassey
• FAS   Dmitry V. Volodin
• IDE controllers   Support account
• Reading/writing IBM 9 track tapes under UNIX   Doug
• Replacement su for SCO Unix   Guy Harris
• Here's how to stop shell escapes from vi   Jonathan I. Kamens
• ODT questions   Per Andersson
• Choosing a 386 unix -- summary   Wade Guthrie
• Here's how to stop shell escapes from vi   Peter da Silva
• screen blanker?   Pete Holsberg
• What the . . . (ISC2.0.2 cu(1) problem)   Bruce M Ong
• Memory Leak in Motif 1.0 Dialog Widgets (Interactive port)   Bruce M Ong
• Novice X-windows question on i386 2.0.2   Lars Tunkrans
• How to install Adaptec AHA-1542B on UHC SVR4   Hai-Chuan Teoh
• Upgrade to Multi User on 386ix   dave
• Esix Mailing List   Pim Zandbergen
• Here's how to stop shell escapes from vi   Jean-Pierre Radley
• G++ V386 Success   Bill Hatch
• Take out memory to speed up kernel build!?   Steve Scherf
• ODT 1.0 on clone 486/25   Michael Squires
• FAS   Wm E. Davidsen Jr
• Diffs to FAQ posting   Conor P. Cahill
• ISC unix FIONBIO PTY bug?   James Van Artsdalen
• Need format util for Adaptec 1542B   Neal Pollack
• Reading/writing IBM 9 track tapes under UNIX   Dmitry V. Volodin
• Sockets in 386/ix   Richard Foulk
• Memory Leak in Motif 1.0 Dialog Widgets (Interactive port)   Conor P. Cahill
• AHA1542B & MiniScribe 9380S & The Friggin Floppy Drive   Gary Coffman
• Xenix 2.3.3 386 floating point problem   Roland van Hout
• FAS   Phil Hughes
• Wcl crashes on startup   John R. Levine
• AHA1542B & MiniScribe 9380S & The Friggin Floppy Drive   Robert Ransbottom
• NS16550 chips with FAS   Eric Varsanyi
• Upgrading 386 for UNIX and DOS - disks? SCSI? Mice? COM boards?   Bill Stewart 201-949-0705 erebus.att.com!wcs
• Looking for low price for OpenDesktop (SCO)   Wade Guthrie
• Replacement su for SCO Unix   Eamonn McManus
• Emacs   Wade Shen
• WD1007V + big Maxtor + DOS + UNIX   Bruce Adler
• NS16550 chips with FAS   Robert A. Kukura
• Take out memory to speed up kernel build!?   Sean Fagan
• i860/V386 Info   Bill Hatch
• Take out memory to speed up kernel build!?   Martin Sandiford
• Take out memory to speed up kernel build!?   Christoph Badura
• What the . . . (ISC2.0.2 cu(1) problem)   Bruce M Ong
• Memory Leak in Motif 1.0 Dialog Widgets (Interactive port)   Bruce M Ong
• Esix mailing list   Bill Heiser
• C compatability between SCO UNIX and Altos 2000 XENIX   Bill Irwin
• Xenix 2.3.3 386 floating point problem   Conor P. Cahill
• Backing up two computers on one tape with UUCP   Bill Irwin
• FTP site   Ross Biro
• Replacement su for SCO Unix   Warren Tucker
• bad sectors   Michael Lodman
• Cheap or free auto-shutdown setup   Bernd Felsche
• HARD DRIVES INTERNATIONAL BEWARE !!!!   Jim Reisert
• Everex Tape-Motherboard Conflict under Unix but not DOS   Rock Kent
• WD1007V + big Maxtor + DOS + UNIX   Tim Wright
• Cheap or free auto-shutdown setup   David Mason
• Take out memory to speed up kernel build!?   Jeff Liebermann
• >= 1024 cyls under ISC 2.0.2   Dmitry V. Volodin
• screen blanker?   Tom Neff
• WD1007V + big Maxtor + DOS + UNIX   Tom Neff
• i386 binaries on sequent.mcs.kent.edu   Yaser K. Doleh
• Serial mouse under Esix rev D   Stephen M. Youndt
• i860/V386 Info   Conor P. Cahill
• What the . . . (ISC2.0.2 cu(1) problem)   Conor P. Cahill
• C compatability between SCO UNIX and Altos 2000 XENIX   Conor P. Cahill
• Backing up two computers on one tape with UUCP   Conor P. Cahill
• Fortran compiler for ISC 2.2 et al   J. Keith Alston
• Upgrade to Multi User on 386ix   Peter Ziobrzynski
• Looking for timed for Interactive Unix 2.2   Adnan Yaqub
• Take out memory to speed up kernel build!?   Steve Monroe
• problem with inbound anonymous uucp sessions   heiser at tdw201.ed.ray.com
• more FAS&RTS   Dmitry V. Volodin
• Fortran compilers for ISC 2.2 et al   J. Keith Alston
• ESIX 3.2 - Opinions Wanted   Merge Technologies Inc.
• 386ix && How to setup dialout lp ??   Paul D. Anderson
• librpcsvc.a on Open Desktop 1.0 (problem ??)   Pierre Noel
• problem with inbound anonymous uucp sessions   Wm E Davidsen Jr
• Esix mailing list   Pim Zandbergen
• Does anybody know LM-X or Lackman?   Leif Andrew Rump
• PC-Interface   Joe Broniszewski
• Untamo on sysV3.2 (was Re: Program to log off idle users)   Bob Posert
• Reading/writing IBM 9 track tapes under UNIX   alan denney
• SCO copy protection daemon   Paul Ashton
• Esix mailing list   Bill Heiser
• SCO UNIX, VPIX, and Screen Blanking   Roger Cornelius
• problem with inbound anonymous uucp sessions   Bill Heiser
• HARD DRIVES INTERNATIONAL BEWARE !!!!   Jim Reisert
• Jetscript board under VP/IX   daniel mocsny
• >= 1024 cyls under ISC 2.0.2   Conor P. Cahill
• C compatability between SCO UNIX and Altos 2000 XENIX   Ti Kan
• FAS   Jean-Pierre Radley
• HARD DRIVES INTERNATIONAL BEWARE !!!!   Darryl Okahata
• problem with inbound anonymous uucp sessions   karl_kleinpaste at cis.ohio-state.edu
• Take out memory to speed up kernel build!?   Ray Shwake
• Cheap or free auto-shutdown setup (was: Reliability Sys V file sys)   Jeff Liebermann
• Replacement su for SCO Unix   Charles Bryant
• Adaptec 154xB   Torkel Hasle
• vpix under x11r4 under 386/ix 2.02   Piercarlo Grandi
• TeX under ISC 386/ix   Dan Rich
• Chantal, Fuji 2263S, and Intel SysV386 problems...   Steve Monroe
• Backing up two computers on one tape with UUCP   Bill Campbell
• 286 -> 386sx Upgrades   Kent L Shephard
• s5ialloc under ISC 2.2   William Miskovetz
• MicroPort Unix V/386   Matthew Frohman
• ISC 1.2 slip   Jim Deitch
• Does anybody know LM-X or Lackman?   Lars Poulsen
• Consensys Powerports board   Gerry Swetsky
• NS16550 chips with FAS   Andrew A. Burgess
• screen blanker?   Pete Holsberg
• GNU EMACS + X11 + Interactive Unix 2.2   Adnan Yaqub
• Email parsers   HIM
• more FAS&RTS   Raymond Nijssen
• Summary of responses: 3C505 ethernet on ISC 2.2   Robert Scott
• TeX under ISC 386/ix   James Van Artsdalen
• Request for Comments: 386 Unix vs Sun vs HP   Mike Verstegen
• HP/SCO UNIX SVR3.2   Alan H. Mintz
• SCO CGI   K. Wade Turner
• ISC UNIX and aha1542b   Brad Karp
• Esix mailing list   Bill Heiser
• Does anybody know LM-X or Lackman?   Sharon Fisher
• HP Laserjet not working under SCO Unix   Dave Armbrust
• HP Laserjet not working under SCO Unix   Jim Burns
• SCO Mailing List   Dave Armbrust
• Backing up two computers on one tape with UUCP   Bill Vermillion
• Cheap or free auto-shutdown setup (was: Reliability Sys V file sys)   Bill Kennedy
• bug jove   eh at phenix pour news
• SC Spreadhseet Calculator on sysV/386   Roland van Hout
• UPS story (Was Re: Cheap or free auto-shutdown setup)   Otto J. Makela
• MicroPort Unix V/386   Tony Becker
• MicroPort Unix V/386   Russell B. Jorgensen
• Does anybody know LM-X or Lackman?   John R. Levine
• system status/debugging tools for ICS 2.0.2 or 2.2   pri=-20*kevin p burke
• SCSI tape install problem with ISC 2.2   Larry Williamson
• SC Spreadhseet Calculator on sysV/386   Bob Bond
• Cheap or free auto-shutdown setup (was: Reliability Sys V file sys)   Doug Pintar
• Intel-8086/80186-Assembler for System-V available ?   Joachim Riedel
• Re^2: AHA1542B & MiniScribe 9380S & The Friggin Floppy Drive   Jon McCown
• vpix under x11r4 under 386/ix 2.02   News Administrator
• crontabs   Richard Foulk
• HP Laserjet not working under SCO Unix   Kristoffer Eriksson
• 4 Port Serial Boards   Paul Emerson
• system status/debugging tools for ICS 2.0.2 or 2.2   Conor P. Cahill
• HARD DRIVES INTERNATIONAL BEWARE !!!!   Norman Kohn
• ISC UNIX and aha1542b   Bill Fulton
• ISC 2.2 and ESDI controllers.   Geraldo Veiga
• Throughput Problem With TB+ and ODT   Mark J. Bailey
• MicroPort Unix V/386   Conor P. Cahill
• Does anybody know LM-X or Lackman?   eric.a.olson
• Running X windows on a 16MHz 386sx   Bob Amstadt
• Intel-8086/80186-Assembler for System-V available ?   Tom Neff
• ISC kernel symbol 'machenv'?   Tom Neff
• File Xfer between mainframe and unix via token ring   Jack F. Vogel
• Cheap or free auto-shutdown setup (was: Reliability Sys V file sys)   Norman Kohn
• 386/ix & ISC X release 1.2   Larry Snyder
• 4 Port Serial Boards   Larry Snyder
• Everex ESIX System V question   Andrew Gillham
• ISC kernel symbol 'machenv'?   Conor P. Cahill
• bad sectors   Heiko Blume
• more FAS&RTS   Heiko Blume
• Running X windows on a 16MHz 386sx   Bill Heiser
• Comsole hangs with ISC X r1.2 and fas2.07 controlled Logitech serial mouse   Saul Lubkin
• fas2.07 and ISC X v1.2 with Logitech serial mouse: Problem Solved!   Saul Lubkin
• SC Spreadhseet Calculator on sysV/386   Joseph E Poplawski
• Looking for low price for OpenDesktop (SCO)   Warren D. Calhoun
• MicroPort Unix V/386   Pete Holsberg
• more FAS&RTS   Uwe Doering
• Driver for Stargate 0C8000 multiport; fas; mouse drivers   Saul Lubkin
• Esix is almost perfect but one little problem :)   Larry Foard
• pcomm, memcpy and bcopy   Saul Lubkin
• Development System --- malloc --- xloadimage and sc   Bill England
• Reading DC6150 XENIX 2.3.2 tapes under ODT   Michael Squires
• Archive Viper 2150s jumpers, etc?   Robert Ransbottom
• funny mail things   Bill Heiser
• Running X windows on a 16MHz 386sx   Tim Pozar
• Reading DC6150 XENIX 2.3.2 tapes under ODT   Michael Squires
• VGA Super and ISC   HIM
• Running X windows on a 16MHz 386sx   Larry Snyder
• funny mail things   Larry Snyder
• MicroPort Unix V/386   Matthew Frohman
• Reading DC6150 XENIX 2.3.2 tapes under ODT   Ronald S H Khoo
• Fortran compiler?   Conor P. Cahill
• 4 Port Serial Boards   Jeffrey K. Johnson
• need a program/script to automatically unpack maps for pathalias   Jim Chandler
• streams, layers   Chuck Luciano
• tar under Interactive unix   Richard Tobin
• Coherent Info   jxholzri at wsuiar.uucp
• Specialix serial card + SCO TCP/IP   =Ronald van der Pol
• Intelligent video cards for ODT   Rob Freyder
• /bin/su - + /bin/sh + long TIMEZONE == big problems on 386/ix 2.0.2   Greyham Stoney
• tar under Interactive unix   Gregory G. Woodbury
• Running X windows on a 16MHz 386sx   Tin Le
• Wyse 60 terminal + VP/ix + ESIX sVrD   Jay Ts
• Here's how to stop shell escapes from vi   Daniel A. Glasser
• Disk benchmark (long)   Shawn Hayes
• Running X windows on a 16MHz 386sx   Bill Heiser
• WD1007V + big Maxtor + DOS + UNIX   Gordon W. Ross
• Running X windows on a 16MHz 386sx   Bill Heiser
• Consensys Powerports board   Keith Walker
• Archive Viper 2150s jumpers, etc?   Jeff Liebermann
• 4 Port Serial Boards   Ralph Engwall
• Specialix serial card + SCO TCP/IP   John Pettitt
• norton utilities - questions about internals   Volker Eggeling
• tar under Interactive unix   Conor P. Cahill
• Running X windows on a 16MHz 386sx   Conor P. Cahill
• tar under Interactive unix   Conor P. Cahill
• Partition table - system types   Leendert van Doorn
• Running X windows on a 16MHz 386sx   Larry Snyder
• 4 Port Serial Boards   Jim Deitch
• 386/ix 2.20 and 12 megs RAM   Larry Snyder
• SCO ODT and wd8013e ethernet card   Rickey E. Chevrie
• Here's how to stop shell escapes from vi   Jonathan I. Kamens
• SCSI tape install problem with ISC 2.2   Support account
• 386/ix & ISC X release 1.2   Support account
• Installing Open Desktop   Wade Shen
• tar under Interactive unix   Paul Gillingwater
• Serial board with 16550's   Gary Grebus
• Looking Glass desktop manager   stig kristensen
• UNIX S/W for CMS Tape Drive!   Dave Levenson
• MicroPort Unix V/386   Student - 44
• Running X windows on a 16MHz 386sx   Bill Heiser
• tar under Interactive unix   Guy Harris
• Removable media on ISC Unix   Stephen M. Youndt
• Getting to my new memory.   Stephen M. Youndt
• 386/ix & ISC X release 1.2   Conor P. Cahill
• 386/ix 2.20 and 12 megs RAM   WB3FFV
• Crisp/Brief/Grief on Unix (Summary)   Rohit Mehrotra
• Running X windows on a 16MHz 386sx   Steve Schoch
• ISC 2.0.2 possibly damaged file system   bhutch at shine7.waterloo.edu
• hosts file for all sites   Larry Snyder
• Telebit T2500 and Intel UNIX 3.2.2   Steven C. Monroe
• mouseadmin   Jeff Row
• HARD DRIVES INTERNATIONAL BEWARE !!!!   Richard Foulk
• tar under Interactive unix   Ronald S H Khoo
• SC Spreadhseet Calculator on sysV/386   Piercarlo Grandi
• Fortran compiler?   Piercarlo Grandi
• 386/ix 2.20 and 12 megs RAM   Conor P. Cahill
• ESIX and RLL contollers   Glenn Geers
• tar under Interactive unix   Doug McCallum
• VGA tall screen in SVR4   Tom Neff
• MicroPort Unix V/386   John Plocher
• Rebuilding the rom.img under DOSMERGE (Microport V/386 3.0e)   Rock Kent
• UNIX S/W for CMS Tape Drive!   Ralph Engwall
• X / Unix Driver for TIGA board?   Robert J. Berger
• 4 Port Serial Boards   Christian Seyb
• UNIX Commands under VPIX on Interactive 2.2 on a T5200/100   Jim Smithson
• /bin/su - + /bin/sh + long TIMEZONE == big problems on 386/ix 2.0.2   Tom Neff
• Running X windows on a 16MHz 386sx   Larry Snyder
• Running X windows on a 16MHz 386sx   Larry Snyder
• getting lines and columns of terminal   Eric Beser
• ISC 2.0.2 possibly damaged file system   Conor P. Cahill
• tar under Interactive unix   Conor P. Cahill
• /bin/su - + /bin/sh + long TIMEZONE == big problems on 386/ix 2.0.2   Ulf Reimann
• tar under Interactive unix   Conor P. Cahill
• Fortran compiler?   Conor P. Cahill
• 386/ix & ISC X release 1.2   Conor P. Cahill
• 386 ABI Document   Doug Ingraham
• tar under Interactive unix   Ti Kan
• 3-6 Computers to good to be true?   Bob Ford
• UHC Unix System V.4   Michael Almond
• Mixture of ISC 2.0.2 and 2.2 system softwares   Willy Paine
• cat problem, file too large   Tim
• 256 colors for SCO Xsight 2.2.0   Phil Kemp
• What's this? "Out of ddms"?   Robert Terry
• Summary of why csh doesn't work for root login   Bruce Himebaugh
• Writing Video/Device Drivers.   Kenny Goers
• Mixture of ISC 2.0.2 and 2.2 system softwares   Geraldo Veiga
• Tricks to getting anon uucp to work with Esix   Bill Heiser
• UNIX C Pragma Directive   David Lau
• FAS with NS16550A versus a smart serial card?   Richard Foulk
• idbuild fails   Tim
• u386mon in 43 line mode   Bill Heiser
• u386mon in 43line mode   Bill Heiser
• Mixture of ISC 2.0.2 and 2.2 system softwares   Larry Snyder
• u386mon in 43 line mode   Tom Neff
• cat problem, file too large   Conor P. Cahill
• Rebuilding the rom.img under DOSMERGE (Microport V/386 3.0e)   Sassan Behzadi
• Installing Open Desktop   Roger Knopf 5502
• Re^2: bad sectors   Chris Old
• tar under Interactive unix   Matthew Farwell
• Re^2: 4 Port Serial Boards   Chris Old
• tar under Interactive unix   Conor P. Cahill
• Mixture of ISC 2.0.2 and 2.2 system softwares   Larry Snyder
• FAS with NS16550A versus a smart serial card?   Larry Snyder
• Summary of Request for Comparison of Altos and NCR   Bruce Himebaugh
• Running X windows on a 16MHz 386sx   Randy Suess
• ISC V2.2.1 was Re: Mixture of ISC 2.0.2 and 2.2 system softwares   Support account
• u386mon in 43 line mode   Joel Swan
• WD8013/8003 boards & SCO ODT   Michael Squires
• init and /etc/TIMEZONE (SCO ODT at least)   Paul Ashton
• tar under Interactive unix   Ronald S H Khoo
• ISC2.2/TCP problem - broken connection remains CLOSED forever   c/o Peter Gaal
• Mixture of ISC 2.0.2 and 2.2 system softwares   Willy Paine
• Questions about AT&T's System V for PC's   Conway Yee
• Writing UNIX video /graphics drivers   Kenny Goers
• Here's how to stop shell escapes from vi   BBS login
• 256 colors for SCO Xsight 2.2.0   BBS login
• 4 Port Serial Boards   Thomas Hoberg
• fas2.07 and ISC X v1.2 with Logitech serial mouse: Problem Solved!   Thomas Hoberg
• pcomm, memcpy and bcopy   Thomas Hoberg
• Partition table - system types   Thomas Hoberg
• tar under Interactive unix   Eric Varsanyi
• MicroPort Unix V/386   Timothy Murphy
• NFS on ISC 386/ix   Paul Gillingwater
• Shell says... is not an identifier (was TIMEZONE).   Tony Olekshy
• Reference manual for 386 assembly language on AT&T Sys V   Stuart Celarier,<None>,2369490,2369386
• Gcc with GNU ld/gas on 386/ix   Dan Rich
• X Windows on SCO V3.2   K. Wade Turner
• GNU libg++ 1.37.1 under ISC UNIX 2.2   Brad Karp
• Spurious Parity Panics w/SCSI under ISC 2.2   Brad Karp
• Running X windows on a 16MHz 386sx   John Mundt
• atof() in SCO UNIX DEV   =Ronald van der Pol
• VGA Super and ISC   Robert Scott
• Disk benchmark (long)   Shawn Hayes
• Adaptec 1542B help: compliments to Microport & many others   Hai-Chuan Teoh
• UUCP protocols   Jim Deitch
• u386mon in 43 line mode   Warren Tucker
• Shell says... is not an identifier (was TIMEZONE).   Conor P. Cahill
• sys5 release 4 unix   Larry Snyder
• Need advice on disk drive selection for ISC 2.2   David Buonomo
• What does this msg from netutil mean?   John Beaudin
• multiport serial board info needed   Shyh Pei Yen
• Need advice on disk drive selection for ISC 2.2   Conor P. Cahill
• Adding second disk on Xenix 2.3.1   Jerry H. Chan
• screen blanker?   Jean-Pierre Radley
• Disk benchmark (long)   Bruce Adler
• Running X windows on a 16MHz 386sx   Timothy Murphy
• 3com ethernetcard + SCO TCP/IP   =Ronald van der Pol
• multiport serial board info needed   Conor P. Cahill
• SC Spreadhseet Calculator on sysV/386   Richard Foulk
• alloca for V.4?   Wm E. Davidsen Jr
• UHC Unix System V.4   Wm E. Davidsen Jr
• multiple bootable partitions   Ralph Reid
• sys5 release 4 unix   Conor P. Cahill
• FAS with NS16550A versus a smart serial card?   Frank Kaefer
• atof() in SCO UNIX DEV   Jack Cloninger
• X / Unix Driver for TIGA board?   Gary Blumenstein
• Screen Dumps   Chip Rosenthal
• Adaptec 1540 & WD1007VSE2 conflict   Michael Squires
• screen blanker?   Tom Neff
• Re^2: 4 Port Serial Boards   Bill Heiser
• Possibly damaged file system on ISC 2.0.2   bhutch at shine7.waterloo.edu
• Getting smail with ISC 2.2 to work   Dante_A_Nicolello at cup.portal.com
• Reference manual for 386 assembly language on AT&T Sys V   Marco S Hyman
• Disk benchmark (long)   Shawn Hayes
• Unix support for 1024x768 VGA card   Vassilis Prevelakis
• FTP speed under TCP/IP for SCO Unix   Tim W Smith
• ISC 2.2 & SL/IP & NFS problems   Petri Helenius
• 4 Port Serial Boards   Larry Snyder
• Converting DOS text files   Eric Johnson
• Getting smail with ISC 2.2 to work   Rolfe Tessem
• SCO CGI under SCO Unix SysV 3.2   Yermo M. Lamers
• Running X windows on a 16MHz 386sx   Dan Mutchler
• FTP speed under TCP/IP for SCO Unix   Michael Squires
• FAS 2.07 SCO problem   Jay Libove
• 4 Port Serial Boards   Jeffrey K. Johnson/65536
• Looking for i386 versions that support >16Meg memory   John M. Haugen
• crontab for ordinary users   Shiping Zhang
• Re^2: bad sectors   Doug Pintar
• 3com ethernetcard + SCO TCP/IP   Hidetoshi Shimizu
• multiple bootable partitions   Stig Jacobsen
• How can I spawn shells in all my virtual terminals   Tom Reingold
• More general questions about HD MTBF   Dick Dunn
• Running X windows on a 16MHz 386sx   Dick Dunn
• WordPerfect under VP/ix 1.02.00   Bill Heiser
• Disk benchmark (long)   Conor P. Cahill
• Getting smail with ISC 2.2 to work   Robert Rothe
• Getting smail with ISC 2.2 to work   Gil Kloepfer Jr.
• vpix in xterm under X11R4   E.J. McKernan
• Proper UNIX FS, ISC disk performance <was: Disk benchmark (long)>   Ray Shwake
• Converting DOS text files   Tom Neff
• norton utilities - questions about internals   Paul Guthrie
• Running X windows on a 16MHz 386sx   0000-Admin0000
• Free Memory Question   Tim Brown
• Disk benchmark (long)   Jeff Turner
• X Windows on SCO V3.2   Tore Solvar Karlsen
• Unix support for 1024x768 VGA card   Larry Snyder
• vpix in xterm under X11R4   Larry Snyder
• Converting DOS text files   John R. Levine
• Wyse 8-port boards forsale -- $200 each   Dan Chaney
• Spurious Parity Panics w/SCSI under ISC 2.2   Larry Williamson
• Desperately Need Electronic Data Interchange Software -- PLEASE HELP!!   Bruce M. Himebaugh
• multiple bootable partitions   Norman Kohn
• Who sells 4.0? Does Intel??   Doug Jacobson
• Running X windows on a 16MHz 386sx   Kaleb Keithley
• Converting DOS text files   John G. DeArmond
• VP/ix on FAS drivers.   Ed Cooley
• Which vendors sell Unix/386 for both ISA and MC?   Chip Salzenberg
• Getting smail with ISC 2.2 to work   Chip Salzenberg
• need C++ compiler for Interactive Unix 2.2   Annette Myjak
• Who sells 4.0? Does Intel??   =Ronald van der Pol
• replace 8250's with 16550's (and FAS)?   Ken Seefried iii
• crontab for ordinary users   Tin Le
• Converting DOS text files   Dick Dunn
• ISC 2.2 & SL/IP & NFS problems   Joe Broniszewski
• Dos partitions   Jerry D. Pierce
• Consensys Powerports board   alan denney
• Appletalk hardware/software for SCO Unix or VP/ix?   Bjorn R. Bjornsson
• Running X windows on a 16MHz 386sx   Larry Snyder
• multiple bootable partitions   Tom Frauenhofer
• multiple bootable partitions   Harri Valkama LAKE
• Modems faster than 2400 BPS under ESIX   COBIA,FRANK NAYLOR
• How do you make COM3 work?   Checkpoint Technologies
• Proper UNIX FS, ISC disk performance <was: Disk benchmark (long)>   Shawn Hayes
• Running X windows on a 16MHz 386sx   Scott Wiesner
• Consensys Powerports board   alan denney
• 386/ix 2.20 and 12 megs RAM   alan denney
• 386/ix 2.20 and 12 megs RAM   alan denney
• Dell v AT&T   alan denney
• Summary of Request for Comparison of Altos and NCR   Peter da Silva
• T2500 on Esix system   Bill Heiser
• FAS and Everex 2400 internal modem   Jonathan R. Senning
• Proper UNIX FS, ISC disk performance <was: Disk benchmark (long)>   Dick Dunn
• Backing up two computers on one tape with UUCP   Scott Bertilson
• Bruce's 386 kernel   Bob McDermott
• kernel tuning   Bruce M Ong
• Getting smail with ISC 2.2 to work   staff
• ISC 2.2 & SL/IP & NFS problems   Larry Snyder
• Which vendors sell Unix/386 for both ISA and MC?   Pim Zandbergen
• Buying a 386 - questions   Eugene Styer
• Converting DOS text files   Rob Peglar
• Disk benchmark (long)   John Kennedy
• simple Internet mailers   Ronald Florence
• WD8013 & SCO UNIX   Michael Squires
• cpio -ivt   Thad P Floryan
• Fortran compiler?   Ian R. Searle
• SCO CGI problems under SCO Unix 3.2 (OPENDESKTOP)   Yermo M. Lamers
• Summary of Request for Comparison of Altos and NCR   Carl Edman
• How to access dos partition from vpix?   Dick Schlotfeldt
• SCO-Unix - booting to single user mode and then crash   Willy Paine
• Converting DOS text files   ken
• Coherent and ESDI drives (again?)   Ty Lasky
• ESIX+ethernet card trouble   Larry Foard
• 286 -> 386sx Upgrades   Dick Dunn
• 286 -> 386sx Upgrades   Clarence Wilkerson
• SCO-Unix - booting to single user mode and then crash   =Ronald van der Pol
• Summary of Request for Comparison of Altos and NCR   Mike Faber
• multiple bootable partitions   Mark T. Spence
• reading tapes on 386/ix written to SCO's /dev/erct0   Pim Zandbergen
• Unix support for 1024x768 VGA card   mark hilliard
• Re^2: 4 Port Serial Boards   Craig W. Shaver
• Looking for i386 versions that support >16Meg memory   Grant DeLorean
• YP for ISC 2.2?   Stan Voket
• 286 -> 386sx Upgrades   John C. Archambeau
• WD8013 & SCO UNIX   Marc Unangst
• Let's support Pete's book!   Bill Kennedy
• FTP speed under TCP/IP for SCO Unix   Petri Helenius
• WD8013 & SCO UNIX   Brad Willcott
• Questions about AT&T's System V for PC's   John Core
• Who sells 4.0? Does Intel??   Tris Orendorff
• CASE Tools   Vic Rice
• SCO SYSV/386 3.2.0 -- Accurate Procedure for "Emergency Boot Floppy"   A J Annala
• Monitors for X-Windows on i386 machine   Allen M. Cohen
• alloca for V.4?   vrs at lint.hf.intel.com.ogi.edu
• what does this msg from netutil mean? (result)   John Beaudin
• Summary of Request for Comparison of Altos and NCR   Marcus J. Ranum
• Running X windows on a 16MHz 386sx   Tin Le
• SCO UNIX/ODT - Adaptec 154X[ab] as secondary controller   Michael Squires
• UUCP protocols   John B. Milton
• Buying a 386 - questions   Jay Ts
• screen blanker?   John B. Milton
• For sale: Unisys 6000/5x Eight port serial card (2) and I/O card (1)   John B. Milton
• X Windows on SCO V3.2   Linas Petras
• Looking for i386 versions that support >16Meg memory   Linas Petras
• Who sells 4.0? Does Intel??   Linas Petras
• partition table - system indices revisited   Leendert van Doorn
• Summary of Request for Comparison of Altos and NCR   John F. Haugh II
• VOTE: voting continues on comp.unix.wizards   John F. Haugh II
• SCO-Unix - booting to single user mode and then crash   Tony Becker
• 286 -> 386sx Upgrades   Tom Frauenhofer
• 386/ix 2.20 and 12 megs RAM   Conor P. Cahill
• Who sells 4.0? Does Intel??   Thad P Floryan
• SCO SYSV/386 3.2.0 -- Accurate Procedure for "Emergency Boot Floppy"   Jack Cloninger
• Summary of Request for Comparison of Altos and NCR   Paul Chamberlain
• Permissions Entry for UUCP rmail   Robert A Bullington
• cmd line args (Was: Re: Converting DOS text files)   Paul Bijnens
• replacing SCO mmdf mail   Eric S. Deese
• Monitors for X-Windows on i386 machine   Larry Snyder
• multiple bootable partitions   Thomas Hoberg
• FAS Help   Paul Emerson
• Problems with ESIX TIOCGWINSZ/SIGWINCH   Andreas Koch
• NFS set file attribute problem on 386/ix   Niklas Hallqvist
• VOTE: voting continues on comp.unix.wizards   Ed McGuire
• Buying a 386 - questions   Larry Snyder
• Summary of Request for Comparison of Altos and NCR   John Cowan
• WD8013 & SCO UNIX   Dick Dunn
• reading tapes on 386/ix written to SCO's /dev/erct0   Pim Zandbergen
• alloca for V.4?   Dick Dunn
• SCO-Unix - booting to single user mode and then crash   Warren Tucker
• cpio -itv solved   Pete Holsberg
• ditroff -> PCL ?   David Arko
• How to access dos partition from vpix?   Bill Heiser
• Monitors for X-Windows on i386 machine   Rob Freyder
• Configuring SCSI drives   Dan Vehr
• 286 -> 386sx Upgrades   Bill Heiser
• VOTE: voting continues on comp.unix.wizards   Eliot Lear
• Who sells 4.0? Does Intel??   Wolf Kozel
• How to access dos partition from vpix?   Pete Holsberg
• Let's support Pete's book!   Pete Holsberg
• Buying a 386 - questions   Pete Holsberg
• 286 -> 386sx Upgrades   John C. Archambeau
• Converting DOS text files   Melinda Shore
• Installing a WD7000A SCSI Controller for SCO Unix 3.2.2   Andrew Kleiman
• YP for ISC 2.2?   Ed Whittemore
• Who sells 4.0? Does Intel??   Michael Almond
• cpio -ivt   Tom Neff
• reading tapes on 386/ix written to SCO's /dev/erct0   Tom Neff
• How to access dos partition from vpix?   Tom Neff
• Who sells 4.0? Does Intel??   Tom Neff
• UNIX binary compatibility   Tom Neff
• FAS Help   John Kennedy
• UNIX binary compatibility   Jim Nelson
• How do you make COM3 work?   Andreas Hoepfner
• atof() in SCO UNIX DEV   Eamonn McManus
• Who sells 4.0? Does Intel??   Larry Snyder
• Who sells 4.0? Does Intel??   Pim Zandbergen
• 286 -> 386sx Upgrades   Ray Shwake
• ESDI disk controllers for EISA   Eric S. Deese
• Looking for bigger fonts and no color in DOS window   Kevin W. Rudd
• Loadable device drivers...in V.4?   ian reid
• SCO SYSV/386 3.2.0 -- Accurate Procedure for "Emergency Boot Floppy"   Gary Heston
• Private C: drive work-around in Simultask (VPix)   peter bye
• crontab for ordinary users   Joe Smith
• Pascal compiler for 386s   Timothy M. Sigmon
• TeX on a System V Rel. 3.2 machine   bhutch at shine7.waterloo.edu
• ESIX vs AT&T documentation   1593]
• Let's support Pete's book!   John G. DeArmond
• How to access dos partition from vpix?   Boyd Ostroff
• 286 -> 386sx Upgrades   Tom Frauenhofer
• How does KDQUEMODE work? (This time for sure!)   Peter M. Jansson
• ISC X11R3 v1.2 vs. C&T based VGA cards (Cardinal 500/600)   Daniel A. Glasser
• xgif on ODT   Rob Peglar
• 386/ix 2.20 and 12 megs RAM   Randy Suess
• multiple bootable partitions   Jeff Turner
• Who sells 4.0? Does Intel??   Dick Dunn
• Herc Graphics Programming for Xenix   Robert Lin
• SCO-Unix - booting to single user mode and then crash   Sean Fagan
• FAS driver works under Bell Tech/Intel; DigiBoard 8 question   Karl Lehenbauer
• YP for ISC 2.2?   Bill Kennedy
• Looking for i386 versions that support >16Meg memory   Roger Knopf 5502
• UNIX binary compatibility   Conor P. Cahill
• Looking for i386 versions that support >16Meg memory   James Van Artsdalen
• Do any UNIX vendors run on IDE disks ?   James Van Artsdalen
• ESIX vs AT&T documentation   1593]
• Who sells 4.0? Does Intel??   Conor P. Cahill
• FAS Help   Uwe Doering
• multiple ACU devices   Larry Snyder
• multiport serial board info needed   Bruce M. Himebaugh
• How to access dos partition from vpix?   Steve McClure
• atof() in SCO UNIX DEV   Bill Heiser
• ADAPTEC 1542b FAILS DMA TEST ON ATI 386-25   Erez N. Carmel
• Buying a 386 - questions   Bill Vermillion
• How to access dos partition from vpix?   rick furniss
• VOTE: voting continues on comp.unix.wizards   Laird J. Heal
• Roell's X11r4 server (success?)   James Van Artsdalen
• Who sells 4.0? Does Intel??   Conor P. Cahill
• ISC 2.2 & SL/IP & NFS problems   Brian Beattie
• Loadable device drivers...in V.4?   Tim W Smith
• u386mon in 43 line mode   Jean-Pierre Radley
• Installing MICROPORT Text Package   Pete Holsberg
• tar under Interactive unix   Karl-P. Huestegge
• Crosstalk Mk.4 not working under VPIX   Robert Scott
• alloca for V.4?   James Van Artsdalen
• X widget set for Interactive Unix   Robert Lin
• Loadable device drivers...in V.4?   Chris Torek
• multiport serial board info needed   Larry Snyder
• ADAPTEC 1542b FAILS DMA TEST ON ATI 386-25   Larry Snyder
• Installing MICROPORT Text Package   Conor P. Cahill
• Loadable device drivers...in V.4?   Rahul Dhesi
• Crosstalk Mk.4 not working under VPIX   Chuck Forsberg WA7KGX
• Loadable device drivers...in V.4?   Tim W Smith
• Loadable device drivers...in V.4?   Tim W Smith
• Patch for MS Bus mouse for Roell's X11r4   James Van Artsdalen
• Are the Prentice Hall books the real McCoy?   Robert Marks
• Can't find function "gethostent" in ISC 2.2   Olof Dahm
• vpix in xterm under X11R4   Thomas Roell
• Interactive 2.2 And Multiple User Groups   Peter Radig
• YP for ISC 2.2?   Wiljo Heinen
• ISC 2.2 & SL/IP & NFS problems   Larry Snyder
• multiport serial board info needed   Gary Lewin
• Summary of Request for Comparison of Altos and NCR   Floyd Ferguson ENG
• 4 Port Serial Boards   Norbert Bladt
• Looking for i386 versions that support >16Meg memory   Bob Palowoda
• FAS Working - Thanks   Paul Emerson
• COM3 & COM4 on XENIX 2.3.2   Marty Wiedmeyer
• Buying a 386 - questions   Pete Holsberg
• System V.4   Michael Almond
• Development Package?   Michael Almond
• Who sells 4.0? Does Intel??   Michael Almond
• emacs config file for 386/ix   Peter Gutmann
• Installing MICROPORT Text Package   Richard Ducoty
• Looking for i386 versions that support >16Meg memory   Richard Trivett
• No Passwd for nuucp   Pete Holsberg
• Who sells 4.0? Does Intel??   Richard Ducoty
• ld -z problem on ESIX Rev D   Arnold Robbins
• alloca for V.4?   Piercarlo Grandi
• Who sells 4.0? Does Intel??   Richard Ducoty
• Suggestions/Recommendations?   Robert Terry
• SCO-Unix - booting to single user mode and then crash   =Ronald van der Pol
• Interactive 2.2 And Multiple User Groups   Conor P. Cahill
• ADAPTEC 1542b FAILS DMA TEST ON ATI 386-25   Norman Kohn
• alloca for V.4?   Wm E. Davidsen Jr
• System V.4   Bill Heiser
• 286 -> 386sx Upgrades   Systems Staff
• COFF gcc and shared libraries on Esix release D   Glenn Geers
• alloca for V.4? (mutter, grumble...)   Tom Neff
• Roell's X11r4 server (success?)   News Administrator
• alloca for V.4?   Tom Neff
• Bruce's 386 kernel   Bruce.Evans
• Who sells 4.0? Does Intel??   Tom Neff
• What about a Microport System V/386 3.0.1e --> 3.2.2 Upgrade?   wolf paul
• Looking for i386 versions that support >16Meg memory   Tim Addington
• Looking for i386 versions that support >16Meg memory   Conor P. Cahill
• Development Package?   Conor P. Cahill
• multiport serial board info needed   Larry Snyder
• Who sells 4.0? Does Intel??   Steve Monroe
• Converting DOS text files   Mark A. Emanuele
• Trouble with hanging virtual terminals   Tom Reingold
• Getting smail with ISC 2.2 to work   John Kennedy
• System V.4   Ray Shwake
• Development Package?   Ray Shwake
• BOOTMENU and PFDISK 1.3 (see comp.sources.misc)   Gordon W. Ross
• alloca for V.4? (mutter, grumble...)   Dick Dunn
• SCO-Unix - booting to single user mode and then crash   Jim Beveridge
• Reading/writing IBM 9 track tapes under UNIX   Valdis Kletnieks
• Getting smail with ISC 2.2 to work   Dick Dunn
• yargs posted to alt.sources   Wm E. Davidsen Jr
• Token Ring, 386 & Unix   brian douglass personal account
• Who sells 4.0? Does Intel??   John Core
• more than 2 drives   John Core
• multiport serial board info needed   John Core
• COM3 & COM4 on XENIX 2.3.2   Marty Wiedmeyer
• Let's support Pete's book!   Jean-Pierre Radley
• What about a Microport System V/386 3.0.1e --> 3.2.2 Upgrade?   Conor P. Cahill
• alloca for V.4? (mutter, grumble...)   Wm E. Davidsen Jr
• Development Package?   D'Arcy J.M. Cain
• Adding SCSI drive to SCO Xenix 2.3.1 as secondary drive   Jerry H. Chan
• ESIX : Socket Trouble (ICMP)   Godeaux Darell
• atof() in SCO UNIX DEV   Sean Fagan
• System V.4   Michael Almond
• Development Package?   Michael Almond
• Mailing List For Brief/Crisp/Grief editor users   Rohit Mehrotra
• multiple bootable partitions   Raymond Nijssen
• Who sells 4.0? Does Intel??   Richard Foulk
• Looking for Maintenance software   Jerry H. Chan
• Getting smail with ISC 2.2 to work   Jim Deitch
• Can you poll a pipe?   John R. Levine
• STREAMS tty watcher...   Lance Ellinghouse
• ISC 2.2: How To Force System Dump?   Jeff Roth
• Development Package?   Conor P. Cahill
• Another thing to check if FAS is locking up...   Karl Lehenbauer
• LPR for ISC -- anyone got a WORKING one?   Karl Denninger
• AIX for a 386 clone   Christopher Widmann
• COM3 & COM4 on XENIX 2.3.2   Alan H. Mintz
• Summary of Request for Comparison of Altos and NCR   Greg Pavlov
• X11R4 for Esix?! who has it   Tim
• Are the Prentice Hall books the real McCoy?   Berny Goodheart
• HELP! Problems installing INGRES on SCO unix 386   Constantinos Papaconstantinou
• Help! INGRES installation problems.   Constantinos Papaconstantinou
• SMTP port not listened   Peter Mason
• atof() in SCO UNIX DEV   Ronald S H Khoo
• UUCP timeout on role change/ sendmail problems ISC 2.0.2   the hacker
• No Passwd for nuucp   Greg A. Woods
• Getting smail with ISC 2.2 to work   Gary Heston
• No Passwd for nuucp   D'Arcy J.M. Cain
• Let's support Pete's book!   Pete Holsberg
• Text editor for visually impaired students   Mickey Boyd
• SMTP port not listened   =Ronald van der Pol
• How To Force System Dump (NMI switch)   Gordon W. Ross
• Can you poll a pipe?   Eric Gisin
• virtual terminals on SVR4 i386   Tom Stewart
• Can you poll a pipe?   Doug McCallum
• multiport serial board info needed   Bill Heiser
• UNIX WP 5.0 + HP LJ III problem   =Ronald van der Pol
• Does GNU's C Compiler Have a Full Screen Debugger?   Bruce M. Himebaugh
• Development Package?   Jean-Pierre Radley
• Communications and other questions.   2flmlife at kuhub.cc.ukans.edu
• Two ethernet cards on 386/ix   Bruce M Ong
• RFS over Streamlined TCP   Paul H Allen
• virtual terminals on SVR4 i386   James Howard
• virtual terminals on SVR4 i386   Larry Snyder
• ISC 2.2: How To Force System Dump?   Joern Lubkoll
• No Passwd for nuucp   Kenneth Herron
• Looking for i386 versions that support >16Meg memory   Brian Chapman
• info on monochrome/grayscale 16" monitor   Bruce Cheng
• alloca for V.4? (mutter, grumble...)   Steve Alexander
• multi-Boot solution   arion at peg.UUCP
• Tapecntl replacement ?   Frank Kaefer - Sun Germany F+A MIS - Munich
• Bad login user id(sco-unix)   Ronald S H Khoo
• No Passwd for nuucp   david.r.connet
• vpix in xterm under X11R4   Richard Foulk
• virtual terminals on SVR4 i386   Tom Stewart
• What about a Microport System V/386 3.0.1e --> 3.2.2 Upgrade?   Richard Ducoty
• multiport serial board info needed   Jeffrey K. Johnson/65536
• Two ethernet cards on 386/ix   Karl Denninger
• UUCP timeout on role change/ sendmail problems ISC 2.0.2   Ray Shwake
• Floppy / dma / video problems?   Jerry H. Chan
• Does GNU's C Compiler Have a Full Screen Debugger?   Bob Sutterfield
• Bad login user id(sco-unix)   pri=20 Chris Halpin
• multiport serial board info needed   Mike Faber
• Can you poll a pipe?   gaf
• virtual terminals on SVR4 i386   Vincent R. Slyngstad
• Reviewers needed (again)   Tom Yager
• System V Release 4.0 for 80x86 systems   Conor P. Cahill
• No Passwd for nuucp   Alex Martelli
• What about a Microport System V/386 3.0.1e --> 3.2.2 Upgrade?   J.T. Conklin
• Communications and other questions.   Chip Rosenthal
• System V Release 4.0 for 80x86 systems   Raymond Nijssen
• SCO UNIX 3.2.0 + DEVSYS + TCP/IP RTS (X Windows & TLI???)   A J Annala
• No Passwd for nuucp   Richard Foulk
• No Passwd for nuucp   Richard Foulk
• What about a Microport System V/386 3.0.1e --> 3.2.2 Upgrade?   wolf paul
• Bad login user id(sco-unix)   John F. Haugh II
• System V Release 4.0 for 80x86 systems   Dewey Coffman
• No Passwd for nuucp   Pete Holsberg
• virtual terminals on SVR4 i386   Pete Holsberg
• Does GNU's C Compiler Have a Full Screen Debugger?   Francois Pinard
• What about a Microport System V/386 3.0.1e --> 3.2.2 Upgrade?   Dick Dunn
• How To Force System Dump (NMI switch)   Robert Ransbottom
• SCO Open Desktop with both ESDI and SCSI   Michael Reamy
• System V Release 4.0 for 80x86 systems   Mark L. Milliman
• Virtual terminals   Pete Holsberg
• SCO Unix and SL/IP   Jim Deitch
• No Passwd for nuucp   Jean-Pierre Radley
• UUCP timeout on role change/ sendmail problems ISC 2.0.2   Vick De Giorgio
• Need help with backups, ISC 2.0.2/floppies   Vick De Giorgio
• System V Release 4.0 for 80x86 systems   ken
• Is osu-cis still out there? Has the number changed?   Bruce M. Himebaugh
• Can you poll a pipe?   Doug McCallum
• SCO-Unix - booting to single user mode and then crash   Barton A. Fisk
• Are the Prentice Hall books the real McCoy?   Jay A. Konigsberg
• TCP/IP on SCO   Ben Knox
• System V Release 4.0 for 80x86 systems   Larry Snyder
• System V Release 4.0 for 80x86 systems   Larry Snyder
• SCO Unix and SL/IP   Larry Snyder
• 'learn' Unix tutorial   Bill Heiser
• uucp vs. nuucp logins <was: No Passwd for nuucp>   Ray Shwake
• Who sells 4.0? Does Intel??   Peter da Silva
• No Passwd for nuucp   Greg A. Woods
• No Passwd for nuucp   Jack F. Vogel
• No Passwd for nuucp   Pete Holsberg
• No Passwd for nuucp   Jeff Liebermann
• Virtual Terminals   Pete Holsberg
• EISA + Wangtek + ESIX = pffft...   Evan Leibovitch
• Getting smail with ISC 2.2 to work   Michael Richardson
• Who sells 4.0? Does Intel??   Larry Snyder
• SCO Unix and SL/IP   Jim Deitch
• Development Package?   Doug Ingraham
• alloca for V.4?   Wm E. Davidsen Jr
• System V.4   Wm E. Davidsen Jr
• 386ix For Sale   Randy Floyd
• Time set program for ESIX Rev. D   Jim Chandler
• vpix in xterm under X11R4   James Van Artsdalen
• rm of files on floppy causes panic...   Lauren Weinstein
• SysV.3 to SysV.4 binary compatibility.   Geoffrey R Graham
• Future Domain SCSI help needed   John G. DeArmond
• SCO Unix and SL/IP   Larry Snyder
• System V.4   Larry Snyder
• cron on ISC UNIX 2.2 has problems with EDT/EST change   Conor P. Cahill
• Is osu-cis still out there? Has the number changed?   karl_kleinpaste at cis.ohio-state.edu
• System V Release 4.0 from Dell   Dewey Coffman
• Pcomm 1.2   Jim Deitch
• Computone   Jim Deitch
• accessing keyboard ports under SCO-Unix   David Mosberger
• ISBN numbers of documenters workbench books wanted   Peter Brouwer
• anyone selling ksh binary for '386 unix (ISC and/or ESIX)   Arnold Robbins
• Loadable device drivers...in V.4?   Erik Sean Nolte
• DOSmerge for Interactive?   Willy Paine
• Virtual Terminals   Greg A. Woods
• inode limit in SCO/Unix.   Phil Trubey
• Virtual terminals   Leslie Mikesell
• No Passwd for nuucp   Bob Daniel
• SCO Unix and SL/IP - should be ESIX   uri at arnor.uucp
• Interactive rlogin problem with nn   Andrew H. Marrinson
• Problem with installation of TCP/IP in kernel   Ellis Carter
• Magic number problems   Jim Santos
• Re^2: Who sells 4.0? Does Intel??   Mark McWiggins
• SysV.3 to SysV.4 binary compatibility.   Dick Dunn
• curses and screen colors   Roger Cornelius
• UN*X Vendors   Gregory K. Ramsey
• Does GNU's C Compiler Have a Full Screen Debugger?   Paul Stachour
• Virtual terminals   Jim Rosenberg
• Who sells 4.0? Does Intel??   Phil Hughes
• inode limit in SCO/Unix.   Conor P. Cahill
• What about a Microport System V/386 3.0.1e --> 3.2.2 Upgrade?   Richard Ducoty
• linking GNU's g++   Rick Moll
• Interactive rlogin problem with nn SOLVED (w/diff)   Andrew H. Marrinson
• SMTP port not listened   David S. Herron
• GCC bug?   John Temples
• SCO UUCP and XON/XOFF - Is HW handshake a requirement ?   Rob Freyder
• Interactive rlogin problem with nn SOLVED (w/diff)   Jaap Vermeulen
• Shrinking the size of your executables (mcs(1) command)   Karl Lehenbauer
• Treasure Chest (was 286 -> 386sx Upgrades)   Steve Ralston
• uucp f protocol on ISC 2.0.2   Chris Old
• Looking for example code for Zilog 8530 in BiSync mode   John Kennedy
• Bad login user id(sco-unix)   Eamonn McManus
• What about a Microport System V/386 3.0.1e --> 3.2.2 Upgrade?   Conor P. Cahill
• Can you poll a pipe?   William G. Bunton
• Can you poll a pipe?   William G. Bunton
• Magic number problem   Jim Santos
• Intel, Bell Tech. & Unix   Richard Griffiths
• Virtual Terminals   Kenneth Herron
• Does GNU's C Compiler Have a Full Screen Debugger?   Erkki Ruohtula
• ftp address for ESIX software   Martin J. Schedlbauer
• 386 unix summaries wanted   Keane Arase
• Are the Prentice Hall books the real McCoy?   Richard Trivett
• Data exchange problems   Markus Kempf
• SysV.3 to SysV.4 binary compatibility.   Jay Logue
• System V Printer Spool   Ed Suh
• SUMMARY: C++ compilers for Interactive Unix (Long)   Annette Myjak
• man pages   Dick Dunn
• Shrinking the size of your executables (mcs(1) command)   Ray Shwake
• Can you poll a pipe?   Dave Lee
• UNIX Performance Penalties   Gregory K. Ramsey
• VGA 800x600 (256/16 colors)   Pete Sridharan
• New 386 UNIX Binary Site   Glenn Geers
• Interactive rlogin problem with nn   Ian Donaldson
• System V.4   Conor P. Cahill
• Magic number problems   Michael Bloom
• anyone selling ksh binary for '386 unix (ISC and/or ESIX)   Wm E. Davidsen Jr
• What about a Microport System V/386 3.0.1e --> 3.2.2 Upgrade?   Norman Kohn
• DOSmerge for Interactive?   Wm E. Davidsen Jr
• System V.4   Wm E. Davidsen Jr
• multiport serial board info needed   Richard Foulk
• curses and screen colors   Stacey Campbell
• Does GNU's C Compiler Have a Full Screen Debugger?   Richard Michael Todd
• Specialix Boards   Paul Guthrie
• UNIX Performance Penalties   Wm E. Davidsen Jr
• SQ55 and Adaptec   Michael Reamy
• Text editor for visually impaired studen.unix.sysv386,misc.wanted   KRW1 at Lehigh
• What about a Microport System V/386 3.0.1e --> 3.2.2 Upgrade?   Richard Foulk
• DOS commands from UNIX command prompt   William Miskovetz
• Argosoft 4.3 BSD on OS/2   Alex Martelli
• Shrinking the size of your executables (mcs(1) command)   Glenn Geers
• SCO Manual pages (WAS Re: System V.4)   Ronald S H Khoo
• vpix in xterm under X11R4   Thomas Roell
• slip   Larry Snyder
• SLIP on Computone under 386/ix   Larry Snyder
• Who sells 4.0? Does Intel??   Larry Snyder
• SysV.3 to SysV.4 binary compatibility.   Larry Snyder
• Non-X11 VGA Graphics Interface   Stephen M. Youndt

Last message date: Wed Oct 31 23:31:23 AEST 1990
Archived on: Mon Feb 1 19:47:45 AEST 2016

• Messages sorted by: [ thread ] [ subject ] [ author ]