April 1991 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]

Starting: Mon Apr 1 01:50:52 AEST 1991
Ending: Tue Apr 30 23:57:08 AEST 1991
Messages: 1067

• "Can't find database" error on SCO UNIX   COBIA,FRANK NAYLOR
• "Can't find database" error on SCO UNIX   Ken Lerman
• "Mastering UNIX Serial Communications"   TECHbooks Official Login
• "Mastering UNIX Serial Communications"   Chuck Murcko
• "Pauses" while cu'ing between two SCO systems with Intel 9600EX V.32   Mark J. Bailey [ADMIN]
• "pwd.h" is lost and my floppy's broken. Please, HELP!!   Stephen M. Youndt
• "pwd.h" is lost and my floppy's broken. Please, HELP!!   Stephen M. Youndt
• "struct itimerval" and "setitimer" in SCO Unix   Mark J. Bailey
• (...) Can we make it smaller?   Dick Dunn
• (LONG) problem with multiple scsi devices on ESIX machine   Jeff Carroll
• (LONG) problem with multiple scsi devices on ESIX machine   Rick Kelly
• (LONG) problem with multiple scsi devices on ESIX machine   Bill Heiser
• ** IPX and VP/ix and WD 8013 problems   Antoni Bronislaw Przygienda
• -Xp optionin ISC cc   Saul Lubkin
• -Xp optionin ISC cc   Karl Denninger
• -Xp optionin ISC cc   Uwe Doering
• 2 user ESIX Rev D and X386   Timothy A. Melton
• 386ix   Wim Philipsen
• 5 microsecond delays in device driver - how?   Paul Slootman
• < Problems with SCSI Streamer on ISC 2.2.1 with AHA1542B >   Robert Rothe
• a better analogy for the warranty discussion?   Super user
• ADTECH 486-25 Motherboard   Leigh Clayton
• ADVICE REQUESTED: SCO UNIX vs. Intel Inboard 386 + Everex RAM-3000-AT   V P Demikhov
• Another GCC 1.39 and Sys Vr4 problem.   Tom Armistead
• Another GCC 1.39 and Sys Vr4 problem.   Andrew Herbert
• Another GCC 1.39 and Sys Vr4 problem.   Tony Becker
• Another GCC 1.39 and Sys Vr4 problem.   Scott Evernden
• Another GCC 1.39 and Sys Vr4 problem.   Dave McCracken
• Another GCC 1.39 and Sys Vr4 problem.   Robert Withrow
• Another GCC 1.39 and Sys Vr4 problem.   Michael Meissner
• ANSI C/gcc1.39 question on Sys Vr4   Tom Armistead
• ANSI C/gcc1.39 question on Sys Vr4   Tony Becker
• ANSI C/gcc1.39 question on Sys Vr4   James Van Artsdalen
• Any good books on SCO Xenix 2.3.2 esp System Administration ?   Nirad Sharma
• Anyone running UN*X on a ZEOS box??   Jeff VanDyke
• Archive 2150s drives   jim at cdp.UUCP
• Archive 2150S Tape Drive   Micheline Liddle
• Archive 2150S Tape Drive   Ken Seefried iii
• Archive Qic-36 controller register info ?   Carlos G. Mendioroz
• AT&T 6386E WGS: how to get rid of "System name: xxx" before login   Eric Thompson
• AT&T 6386 SVR3 - Looking for applications   James G. Baker
• auto dial slip (was Re: Exabyte and ..)   Stuart Lynne
• auto dial slip (was Re: Exabyte and ..)   Larry Snyder
• A Wangtek Quiz (what is this board?)   Marco S Hyman
• A Wangtek Quiz (what is this board?)   Martin Luddite
• Backup of DOS partitions   Wm E. Davidsen Jr
• Backup of DOS partitions   Leslie Mikesell
• Bad Hertz on SCO   Evan B. Ross
• Bad Hertz on SCO   Peter da Silva
• Bad permissions SCO Unix   Andre van Brussel
• belltech (ne intel) ICC multiport card sysVr4 drivers?   Derek E. Terveer
• belltech (ne intel) ICC multiport card sysVr4 drivers?   Stew Ellis
• Best Video for SCO ODT   Robert Hoquim
• Best Video for SCO ODT   Steve Cohen
• Best way to backup SCO Xenix/UNIX   Wm E. Davidsen Jr
• Best way to backup SCO Xenix/UNIX   Connor MacLeod
• Best way to backup SCO Xenix/UNIX   Ronald S H Khoo
• Bidirectional modem under ISC 2.2   John R. Levine
• Binary patch to os.o fixes POSIX panics using VP/ix with job controlled bash   Saul Lubkin
• Bogus WRONG TIME TO CALL from uustat   John Temples
• Bogus WRONG TIME TO CALL from uustat   Greg Hackney
• boot floppy   Michael Lodman
• booting DOS on ISC+SCO, and DOS filesys handling (long-ish)   colin manning
• booting DOS on ISC+SCO, and DOS filesys handling (long-ish)   John J. Rushford Jr
• booting DOS on ISC+SCO, and DOS filesys handling (long-ish)   john.urban
• bug in /etc/dfspace   Jim Gottlieb
• building gcc,g++, libg++, and gdb on SCO   Andrew Davidson
• Building GCC on SVR4   Lee Crocker
• Buying UNIX for a clone   Richard A. Lethin
• Buying UNIX for a clone   James Deibele
• Buying UNIX for a clone   Larry Snyder
• Buying UNIX for a clone   Larry Snyder
• Buying UNIX for a clone   John Temples
• Buying UNIX for a clone   Conor P. Cahill
• Buying UNIX for a clone   Bill Heiser
• Buying UNIX for a clone   Larry Snyder
• Buying UNIX for a clone   Larry Snyder
• Buying UNIX for a clone   Larry Snyder
• Buying UNIX for a clone   John Temples
• Buying UNIX for a clone   John Temples
• Buying UNIX for a clone   Bill Heiser
• Buying UNIX for a clone   Bill Heiser
• Buying UNIX for a clone   Larry Snyder
• Buying UNIX for a clone   Larry Snyder
• Buying UNIX for a clone   Conor P. Cahill
• Buying UNIX for a clone   Huver
• Buying UNIX for a clone   Robert Withrow
• Buying UNIX for a clone   Dave Remien
• Buying UNIX for a clone   Bill Heiser
• Buying UNIX for a clone   Bill Heiser
• C-news and SCO Xenix 2.3.3   Ronald S H Khoo
• Can't bring up ethernet on SCO UNIX   James J Dempsey
• Can't get X386 to Work   Terry Mitchem
• Can't get X386 to Work   Terry Mitchem
• Can't get X386 to Work   Conor P. Cahill
• Can't get X386 to Work   Larry Snyder
• Can't get X386 to Work   Michael Stefanik
• Can't get X386 to Work   Chin Fang
• Can my UNIX run X386?   Shaun T. Erickson
• Can somone help me put Emacs on an ESIX system?   Ernest Adams
• cant execute /bin/sh in gdb   Andrew Davidson
• Can VP/ix "see" secondary controller DOS part.?   Stephen Hite
• CD-ROM and ISC Unix and VP/ix? Help!   James P. H. Fuller
• CD-ROM w/ISC   Joern Lubkoll
• CD-ROM w/ISC   Trygve Storr|nningen
• CD-ROM w/ISC   Hans Oey
• CD-ROM w/ISC   alex
• CERT and ISC (was: Hack-Attempt on dobag (ISC-Bugs))   Phillip M. Vogel
• Changing hard disk partitions   Paul Moore
• Changing hard disk partitions   Conor P. Cahill
• Changing hard disk partitions   Peter da Silva
• Changing hard disk partitions   Conor P. Cahill
• Changing hard disk partitions   Tim Wright
• Changing hard disk partitions   Conor P. Cahill
• Changing hard disk partitions   peter da silva
• Changing hard disk partitions   Peter da Silva
• Cheap source for Archive tape drives?   Jeff Davis
• CMS Jumbo Tape on ISC2.2 finally works   Michael C. Murray
• CMS tape backup and sysv386 (Has ANYONE been successful??)   David Wojtowicz
• CMS tape backup and sysv386 (Has ANYONE been successful??)   Kent Karrer
• CMS tape backup and sysv386 (Has ANYONE been successful??)   Kayvan Sylvan
• CMS tape backup and sysv386 (Has ANYONE been successful??)   WB3FFV
• Colorado Tape driver for SCO UNIX (wanted)   Santiago Newbery
• compiling 'less'   Jim Gottlieb
• Compiling GNUCPIO under SCO UNIX SDS (and comparables)   Ray Shwake
• Compiling GNUCPIO under SCO UNIX SDS (and comparables)   Warren Tucker
• compiling X386 in ESIX 5.3.2D   Bob Willcox
• compiling X386 in ESIX 5.3.2D   Thomas Roell
• compiling X386 in ESIX 5.3.2D   Pim Zandbergen
• compiling X386 in ISC 2.2   Stu Donaldson
• compress -d   C. S. Huang
• compress -d   Conor P. Cahill
• compress -d   Gary Coffman
• compress -d   Mark A. Emanuele
• compress -d   Thomas Hoberg
• configuring FAS   Bill Heiser
• configuring FAS   Uwe Doering
• configuring FAS   Dave McLane
• configuring FAS   Bill Heiser
• configuring FAS   Uwe Doering
• Connect Speed   BBS Administration
• Connect Speed   Larry Snyder
• Console running ISC setcolor goes bizarro after CU disconnect   Ray Shwake
• Ctl-S on SCO?   Evan B. Ross
• ct won't run (was: SCO 'su' replacement)   Ralf U. Holighaus
• ct won't run (was: SCO 'su' replacement)   Ronald van der Pol
• ct won't run (was: SCO 'su' replacement)   Marc Unangst
• ct won't run (was: SCO 'su' replacement)   Daniel A. Glasser
• ct won't run (was: SCO 'su' replacement)   Marc Unangst
• ct won't run (was: SCO 'su' replacement)   Chip Rosenthal
• Current Run-Level: How can you tell?   Steve Ralston
• Current Run-Level: How can you tell?   Daniel A. Graifer
• Current Run-Level: How can you tell?   Ernie Englehart
• Current Run-Level: How can you tell?   Peter da Silva
• Current Run-Level: How can you tell?   Scott Schwartz
• Current Run-Level: How can you tell?   Peter Lamb
• Current Run-Level: How can you tell?   Conor P. Cahill
• Current Run-Level: How can you tell?   Kartik Subbarao
• Current Run-Level: How can you tell?   Paul Slootman
• Current Run-Level: How can you tell?   Peter da Silva
• Current Run-Level: How can you tell?   Guangliang He
• Current Run-Level: How can you tell?   Dick Dunn
• Curses again   Mark Reid
• Curses again   Tom Armistead
• Curses again   Warren Tucker
• Dangerous to back up too much?   Jim Gottlieb
• Databus runtime under SCO Vpix 1.2   UUNET News Administrator
• Databus runtime under SCO Vpix 1.2   Jan Ivar Soerby
• Daylight Savings Time..   Bill Vermillion
• Daylight Savings Time..   Kevin W. Reed
• DBM/ LQ-Text question   John G. DeArmond
• DELETING (or remaking) SCO User accounts   Chip Yamasaki
• DELETING (or remaking) SCO User accounts   David J. MacKenzie
• DELETING (or remaking) SCO User accounts   Rich Braun
• DELETING (or remaking) SCO User accounts   Jean-Pierre Radley
• DELETING (or remaking) SCO User accounts   System Operator
• Device Driver   Brian Beattie
• Difference between Sys V.3 and V.4   Barton A. Fisk
• Documentation on UNIX serial drivers   harry kobetitsch
• Does Dell ship manuals with SVR4?   Randy Howard
• Does Dell ship manuals with SVR4?   Richard Foulk
• Does Dell ship manuals with SVR4?   John Steczkowski
• Does Dell ship manuals with SVR4?   Dave McCracken
• Does ESIX still not support RLL?   Kent Karrer
• Does ESIX still not support RLL?   Kaleb Keithley
• Does ESIX still not support RLL?   Rahul Dhesi
• Does ESIX still not support RLL?   David Kessner
• Does ESIX still not support RLL?   wjb at cogsci.cog.jhu.edu
• Does ESIX still not support RLL?   Bill Pechter
• Does ESIX still not support RLL?   Bill Pechter
• Does ESIX still not support RLL?   Kaleb Keithley
• Does ESIX still not support RLL?   Colonel Panic
• Does ESIX still not support RLL?   brian
• Does ESIX still not support RLL?   Rahul Dhesi
• Does ESIX still not support RLL?   David Kessner
• Does ESIX still not support RLL?   Kent Karrer
• Does ESIX still not support RLL?   Bill Pechter
• Does ESIX still not support RLL?   Pete Holsberg
• Does ESIX still not support RLL?   Jon Gefaell
• Does ESIX still not support RLL?   Jon Gefaell
• Does ESIX still not support RLL?   Mark A. Emanuele
• Does ESIX still not support RLL?   James Deibele
• Does ESIX still not support RLL?   Nathan D. Lane
• Does ISC UNIX support Colorodo Tape (Was: Re: Colorado Tape driver for SCO UNIX (wanted))   James Tsillas
• Does the tabs(1) command work?   John Temples
• DOS & UNIX co-existance   Andrew Gallo
• Dos and unix on same Disk   Tom Stewart
• Dos and unix on same Disk   Aris Zakinthinos
• Educational Discounts.   Alex Goykhman
• EISA 1740 SCSI drivers under ISC 2.2.1 and SCO 3.2.2   colin manning
• Emacs 18.57, ISC 2.2.1, continued...   leo at aai.com
• Emacs 18.57, ISC 2.2.1, continued...   Kayvan Sylvan
• Emacs 18.57, ISC 2.2.1, Protocol rev, TERM variable   leo at aai.com
• Emacs 18.57, ISC 2.2.1, Protocol rev, TERM variable   Kayvan Sylvan
• Emacs 18.57, ISC 2.2.1, Protocol rev, TERM variable (SUMMARY)   leo at aai.com
• Emacs 18.57, ISC 2.2.1, Protocol rev, TERM variable (SUMMARY)   wilson w ma
• Emacs term def -- Message Summary   geoff at vax1.mankato.msus.edu
• Epoch on ISC's Sys-V3.2   Alan M. Carroll
• ESIX "pauses" and panics   Dave Shepperd
• ESIX (and other) SVR4   bstrong at sleepy.bmd.trw.com
• ESIX (and other) SVR4   Chuck Murcko
• ESIX (and other) SVR4   dj
• ESIX (and other) SVR4   Brandon S. Allbery KB8JRR/AA
• ESIX (and other) SVR4   Larry Snyder
• ESIX (and other) SVR4   Dick Dunn
• ESIX (and other) SVR4   Bill Hatch
• ESIX (and other) SVR4   Peter Wemm
• ESIX (and other) SVR4   Larry Snyder
• ESIX (and other) SVR4   Larry Snyder
• ESIX (and other) SVR4   john gay
• ESIX (and other) SVR4   Paul Nash
• ESIX (and other) SVR4   John Temples
• ESIX (and other) SVR4   Evan Leibovitch
• ESIX (and other) SVR4   Len Reed
• ESIX (and other) SVR4   Alex Goykhman
• ESIX *does* support RLL (was Re: Does ESIX still not support RLL?)   Glenn Geers
• ESIX *does* support RLL (was Re: Does ESIX still not support RLL?)   Karl Denninger
• ESIX, IDE drives, and FAS...   Gray Watson
• ESIX 4.0   Evan Leibovitch
• ESIX 4.0   John Temples
• ESIX 4.0   Robert den Hartog
• ESIX 4.0   Larry Snyder
• ESIX 4.0   Peter da Silva
• ESIX 4.0   Chin Fang
• ESIX 4.0   -Jeff Ellis
• ESIX 4.0   Scott Evernden
• ESIX 5.3.2 question   john.k.sun
• ESIX and Caching Motherboards   Paul De Bra
• ESIX and Caching Motherboards   Paul De Bra
• ESIX and Caching Motherboards   James Van Artsdalen
• ESIX and Caching Motherboards   Pascal Gosselin
• Esix and getpeername   Wayne McCormick
• ESIX does support RLL, was Re: Does ESIX still not support RLL?   Kaleb Keithley
• ESIX email addresses needed badly!   Peter Wemm
• ESIX price and Cohearant   Madison MadMan Miles
• ESIX price and Cohearant   Rick Kelly
• Esix rfs and Sun rfs, have anyone used these together?   Joergen Haegg
• ESIX sockets   Darryl Okahata
• ESIX sockets   Ross Biro
• ESIX sockets   Chip Salzenberg
• ESIX sockets   Uri Blumenthal
• ESIX sockets   Ross Biro
• ESIX sockets   Darryl Okahata
• ESIX sockets again   Peter Wemm
• ESIX SVR4.0 pricing?   -Jeff Ellis
• ESIX SVR4.0 pricing?   Jian Yuan Peng
• ESIX SVR4.0 pricing?   -Jeff Ellis
• ESIX System V R4 Pricing   TECHbooks Official Login
• ESIX Sys V.4 - where to buy?   Peter Wemm
• ESIX Updates?   christophe a egert
• ESIX X386,NFS Questions   Larry Snyder
• ESIX X386 and NFS Questions   Bob Palowoda
• EtherCard Plus vs. Digiboard PC/16i??   Todd Ogasawara
• EtherCard Plus vs. Digiboard PC/16i??   Todd Ogasawara
• Exabyte and Multiple SCSI device performance   Stuart Lynne
• Exabyte and Multiple SCSI device performance   Larry Snyder
• Exabytes and SCO ODT 1.0   Justin R Shuttleworth
• fas 2.08 problems   Bill Heiser
• fas 2.08 problems   Uwe Doering
• fas 2.08 problems   Dick Dunn
• fas 2.08 problems   Bill Heiser
• fas 2.08 problems   Robert Withrow
• fas 2.08 problems   -Jeff Ellis
• FAS on ESIX   Roland van Hout
• fatal error in ISC compiler   David Van Beveren
• File Size Error under VPIX and PCNFS   Tillmann A. Basien
• Finally!! CTL-S works on SCO   Evan B. Ross
• Floppy Tape problems   Bob Barker
• Formatting manual pages   Paul Moore
• Formatting manual pages   Ronald van der Pol
• Formatting manual pages   Conor P. Cahill
• Formatting manual pages   Marc Unangst
• Fortran Compilers for 386 Unix   Studenten Vereniging Stack
• Fortran Compilers for 386 Unix   Vic Rice
• Frustration with GCC, G++ and ISC 2.2   0000-Admin0000
• Fujitsu 2663SA + AHA1542B + 2.2.1 == ok?   Tan Bronson
• FYI : Side effect of increasing ULIMIT in /usr/lib/cron/logchecker   Jim Smithson
• GCC 1.39 & G++ 1.39.0 with COFF GAS 1.38 on ISC 2.2   Brad Karp
• GCC 1.39 & G++ 1.39.0 with COFF GAS 1.38 on ISC 2.2   David Dawes
• GCC 1.39 & G++ 1.39.0 with COFF GAS 1.38 on ISC 2.2   Heiko Blume
• GCC 1.39 & G++ 1.39.0 with COFF GAS 1.38 on ISC 2.2   Wilson W Ma
• GDB "Can't exec" Problem   Sean Eric Fagan
• GDB "Can't exec" Problem   Eric Newton x2092
• GDB "Can't exec" Problem   Heiko Blume
• GDB "Can't exec" Problem (+some other quirks)   Steve Ralston
• Genoa 6400/X386 1024x768ni   Mike Hickey,508W,x324
• Getting AT&T SVR4 up on SCSI   jrd at cc.usu.edu
• Getting AT&T SVR4 up on SCSI   Kent Karrer
• getty/uugetty -- what is the difference, really?   Kent Karrer
• getty/uugetty -- what is the difference, really?   Conor P. Cahill
• Goofy problem with SCO Unix and Xenix   Dave Shepperd
• Goofy problem with SCO Unix and Xenix   Michael Squires
• Goofy problem with SCO Unix and Xenix   Chris Durham
• Groff docs: where to get?   Rob Lingelbach
• Groff docs: where to get?   David Dawes
• Hack-Attempt on dobag (ISC-Bugs)   Rick Farris
• Hack-Attempt on dobag (ISC-Bugs)   Paul De Bra
• Hack-Attempt on dobag (ISC-Bugs)   Ralph-Diether Marzusch
• Hack-Attempt on dobag (ISC-Bugs)   Richard Foulk
• Hack-Attempt on dobag (ISC-Bugs)   Joern Lubkoll
• Hardware callback devices for frontending/backending a modem.   Peter da Silva
• Hardware callback devices for frontending/backending a modem.   Leslie Mikesell
• Has anybody built ATI drivers for X386?   Tim Tyhurst
• Has anyone got X386 working under Dell SysV R 4.0?   Bret Rothenberg
• Has anyone got X386 working under Dell SysV R 4.0?   Larry Snyder
• Has anyone got X386 working under Dell SysV R 4.0?   Bret Rothenberg
• Having problems with zmodem on ESIX SysV 3.2 Rev D   Sean Owens
• Having problems with zmodem on ESIX SysV 3.2 Rev D   Tim Pozar
• HELP !!!!! rnews -U WON'T work   Mark A. Emanuele
• Help! I think I screwed up. (/etc/issue)   Harry A Levinson
• HELP, Ethernet installation failure on SCO Unix   Knut Alfredsen
• HELP, Ethernet installation failure on SCO Unix   Michael Squires
• HELP, Ethernet installation failure on SCO Unix   W. Paul Zola
• Help 9-track tape for ISC   jim rybacki
• Help building ESIX kernel for X386   Bob Willcox
• Help Please with Telebit and SCO RTS/CTS Setup.   Greg Andrews
• Help Please with Telebit and SCO RTS/CTS Setup?! (LONG)   Mark J. Bailey
• Help Please with Telebit and SCO RTS/CTS Setup?! (LONG)   Steve Watt
• Help Please with Telebit and SCO RTS/CTS Setup?! (LONG)   Connor MacLeod
• Help Please with Telebit and SCO RTS/CTS Setup?! (LONG)   Uwe Doering
• Help Please with Telebit and SCO RTS/CTS Setup?! (LONG)   Uwe Doering
• Help Please with Telebit and SCO RTS/CTS Setup?! (LONG)   Dmitry V. Volodin
• Help trying to add SCSI Connor Peripherals 104M to ICS 2.2   George Aguiar
• help with X386?   mareb at levels.sait.edu.au
• help with X386?   David Rector
• help with X386?   flinton at eagle.wesleyan.edu
• help with X386?   Daniel A. Glasser
• Help with X386?? (Please!!!)   geoff at vax1.mankato.msus.edu
• High-speed SLIP/PPP   Rich Braun
• High-speed SLIP/PPP   Brian Lloyd
• High-speed SLIP/PPP   Aris Stathakis
• High-speed SLIP/PPP   Larry Snyder
• High-speed SLIP/PPP   William Miskovetz
• High-speed SLIP/PPP   Michael Haberler
• How about a <flame> on UHC R4 Unix?   Jim Lick
• How about a <flame> on UHC R4 Unix?   Andrew Herbert
• How do I disable flow control for an rlogin session?   Rick Farris
• How do I disable flow control for an rlogin session?   Petri Wessman
• How do I disable flow control for an rlogin session?   Jim Beveridge
• How do I map I/O in ESIX?   Joergen Haegg
• how do I use ioctl(,MCAIO,) in ISC2.2   Dave Bullis
• how do I use ioctl(,MCAIO,) in ISC2.2   John Hughes
• How do you get SLIP fot ISC?   Staff- Bob S Turner
• How do you get SLIP fot ISC?   Larry Snyder
• How do you get Tom Roell's X11R4 Server for ISC   Jim B. Huber
• How do you increase the number of ptyp00's to 15??   jim morris
• How to execute 'sz' and 'rc' ?   Hermann Behrens
• How to make a laserjet work with Xroff?   Richard Karasik
• How to make a laserjet work with Xroff?   Chris Lewis
• How to make kernel calls to SCO XENIX System V?   Bruce A. Mitchell
• How to translate from f/s block # to absolute disk sector?   James P. H. Fuller
• How to translate from f/s block # to absolute disk sector?   John Temples
• How to translate from f/s block # to absolute disk sector?   Ed Gould
• How to unify Unix386, MAC, DOS/Windows under one network?   Harry A Levinson
• Ignoring carrier detect   Paul S Secinaro
• Ignoring carrier detect   Leslie Mikesell
• INIT: Command is respawning too rapidly...   Paul Moore
• INIT: Command is respawning too rapidly...   Conor P. Cahill
• INIT: Command is respawning too rapidly...   Paul Slootman
• INIT: Command is respawning too rapidly...   Johannes Sjogren
• INIT: Command is respawning too rapidly...   Dick Heijne CCS/TS
• INIT: Command is respawning too rapidly...   Robert den Hartog
• INIT: Command is respawning too rapidly...   Dick Heijne CCS/TS
• INIT: Command is respawning too rapidly...   Stu Donaldson
• INIT: Command is respawning too rapidly...   Richard Karasik
• INIT: Command is respawning too rapidly...   Fred Walter
• Installation problem on EISA-Compaq   felix brunner
• Installing perl 4.0/03 on SCO UNIX 3.2.2   Jan-Piet Mens
• Installing perl 4.0/03 on SCO UNIX 3.2.2   Jean-Pierre Radley
• Installing X11R4 on SCO UNIX   Gary Blumenstein
• Interactive UNIX bsd libraries   Paul Gillingwater
• Interactive UNIX bsd libraries   Duncan McEwan
• Interactive UNIX bsd libraries   Charlie Lear
• Interested in Setting up UNIX on my 386   Shannon D. Appel
• isc, slip, X   Steven H. Izen
• ISC 2.0.2 X/TCP problem   Prashanth Prakash
• ISC 2.2 - DOS partitions and COMPAQ?   Randy Jarrett
• ISC 2.2.1 + Fujitsu 1.2Gb drive + AHA 1740 EISA SCSI   colin manning
• ISC 2.2.1 - which C compilers do you use? Why?   leo at aai.com
• ISC 2.2.1 groups != Sun/BSD groups   Tan Bronson
• ISC 2.2.1 groups != Sun/BSD groups   Conor P. Cahill
• ISC 2.2.1 groups != Sun/BSD groups   Grant DeLorean
• ISC 2.2.1 groups != Sun/BSD groups   Greg Onufer
• ISC 2.2.1 groups != Sun/BSD groups (+ patch)   Uwe Doering
• ISC 2.2.1 groups != Sun/BSD groups (+ patch)   Sean Eric Fagan
• ISC 2.2.1 groups != Sun/BSD groups (+ patch)   Uwe Doering
• ISC 2.2.1 groups != Sun/BSD groups (+ patch)   Eric Gisin
• ISC2.2 and uugetty-does it work?   Doug Mr-Science Stein
• ISC2.2 and uugetty-does it work?   kent karrer
• ISC2.2 and uugetty-does it work?   Conor P. Cahill
• ISC2.2 and uugetty-does it work?   John R. Levine
• ISC2.2 and uugetty-does it work?   Fred Walter
• ISC2.2 and uugetty-does it work?   Gary Coffman
• ISC2.2 and uugetty-does it work?   Larry Snyder
• ISC cc optimizer options   Pat Myrto
• ISC linker reports permissions error (help)   David Van Beveren
• ISC linker reports permissions error (help)   David Van Beveren
• ISC linker reports permissions error (help)   Conor P. Cahill
• ISC linker reports permissions error (help)   Conor P. Cahill
• ISC RPC NFS v1.2 rexd   Bill Kennedy
• ISC RPC NFS v1.2 rexd   Bill Kennedy
• ISC SWAP QUESTION   Phill St. Louis
• ISC SWAP QUESTION   Heiko Blume
• ISC ver3.2 for sale   C. S. Huang
• ISC X11/logitec 3 button mouse   Rick Wagner
• ISC X11/logitec 3 button mouse   Gregory F. Hogg
• ISC xtrek help   Steven C. Monroe
• Is there a KCL for ISC 386ix ?   Juergen Nickelsen
• Is this a reasonable platform for SCO Unix?   Charles Blair
• Is this a reasonable platform for SCO Unix?   Dave Fenske
• Is this a reasonable platform for SCO Unix?   Ray Shwake
• Is this a reasonable platform for SCO Unix?   Rick Farris
• Is this a reasonable platform for SCO Unix?   Dick Dunn
• Is this a reasonable platform for SCO Unix?   Michael Squires
• Is this a reasonable platform for SCO Unix?   Rick Farris
• Is this a reasonable platform for SCO Unix?   Jean-Jacques Drolet
• Is this a reasonable platform for SCO Unix?   Peter Yeung
• Is this a reasonable platform for SCO Unix?   Ray Shwake
• JUMBO tape device driver wanted.   phillips at qut.edu.au
• Kernel Message Routing (sVr4)   David Dave Kraus
• Kernel Messages   David Dave Kraus
• Kernel Sizes   Dick Dunn
• Kernel Sizes (was Re: Since Most Everythings's right... )   Gary Heston
• Keypad defs' for EMACS under AT386 terminal type..????   geoff at vax1.mankato.msus.edu
• Keypad defs' for EMACS under AT386 terminal type..????   Dave Hayes
• Layers and Multitech V.32/v.42 modems   eric.a.olson
• Layers and Multitech V.32/v.42 modems   Robert White
• Less misbehaves when used for "man" pager...   Doug Fields
• Less misbehaves when used for "man" pager...   Curt Sampson
• Less misbehaves when used for "man" pager...   Victor Gavin
• Less misbehaves when used for "man" pager...   Paul Slootman
• Less misbehaves when used for "man" pager...   Marc Unangst
• Less misbehaves when used for "man" pager...   Chip Salzenberg
• Less misbehaves when used for "man" pager...   Michael Stefanik
• Less misbehaves when used for "man" pager...   Jean-Pierre Radley
• Line printers under ISC   Richard Karasik
• Line printers under ISC   Chris Lewis
• Loading msWindow's APPLICATIONS under VP/ix (386ix)   Tom Neff
• Logitech mouse compatibility ?   Didier Poirot
• Logitech mouse compatibility ?   Wu Liu
• Long File Names in sys V.4   Grant Munsey
• Long File Names in sys V.4   Tony Becker
• Long File Names in sys V.4   Bill Heiser
• Looking for old/used Unix   Benjamin Cline
• Looking for terminals for AT&T SysV r3.2   Jonathan Herr
• Low-cost 386 system   Wes Peters
• Low-cost 386 system   phil at sequent.com
• Low-cost 386 system   Checkpoint Technologies
• LPR for 386 UNIX (part 1/2)   Paul Fox
• LPT2: Vpix under SCO UNIX   Kenneth Jamieson
• malloc() problems   Charlie Root
• malloc() problems   Conor P. Cahill
• malloc() problems   Robert White
• malloc() problems   Conor P. Cahill
• malloc() problem solved(?)   Dan Rich
• malloc() problem solved(?)   Conor P. Cahill
• malloc() problem solved(?)   terry a jones
• malloc() problem solved(?)   John Temples
• malloc() problem solved(?)   Conor P. Cahill
• malloc() problem solved(?)   Rich Stevens
• Memory for NEC Powermate <was: Dell SysVr4 on NEC Powermate>   Ray Shwake
• Memory for NEC Powermate <was: Dell SysVr4 on NEC Powermate>   Ray Shwake
• Memory for NEC Powermate <was: Dell SysVr4 on NEC Powermate>   Jan Mikkelsen
• MGR and Interactive/ESIX Patches   mdm at cocktrice.uucp
• mh running on Interactive 386/ix   Kevin J. Dunlap
• Microport SYS V Rel. 4.0   Bernd Hennig
• MicroSoft Word under Vp/ix   Jon Ryshpan
• missing driver in Esix 5.3.2?   robsch
• MIT C-Scheme   Darryl Trujillo
• MMDF & bounced mail   John R. MacMillan
• MMDF & bounced mail   Tim Wright
• mmdf configuration   Superuser
• More about CTL-S under SCO   Evan B. Ross
• More about CTL-S under SCO   Jim Balter
• More about CTL-S under SCO   Peter da Silva
• Motif on ISC 2.2   Kevin L. McBride
• Motif on ISC 2.2   Siamak Ghasemian
• Motif vs Open Look vs reality (Re: ESIX 4.0)   Peter da Silva
• Motif vs Open Look vs reality (Re: ESIX 4.0)   Chin Fang
• Mouseman, C9, Trackman   Grant DeLorean
• MS-DOS cross compiler   ken.m.krakman
• Multiport I/O cards: for which cards is driver source available?   Michael Haberler
• Multiport I/O cards: for which cards is driver source available?   Chip Rosenthal
• Multiport I/O cards: for which cards is driver source available?   Larry Snyder
• Multiport I/O cards: for which cards is driver source available?   John Pettitt
• Multiport I/O cards: intelligent or dumb?   Tony Shepps
• Multiport I/O cards: intelligent or dumb?   Grant DeLorean
• Multiport I/O cards: intelligent or dumb?   Uwe Doering
• Multiport I/O cards: intelligent or dumb?   Wm E. Davidsen Jr
• Multiport I/O cards: intelligent or dumb?   Larry Snyder
• Multiport I/O cards: intelligent or dumb?   Super user
• NAMEI panic - trap "E", address and info follows   Karl Denninger
• NAMEI panic - trap "E", address and info follows   Rodney Volz
• NAMEI panic - trap "E", address and info follows (+ patch)   Uwe Doering
• NCR NFS endianism   Bill Kennedy
• Need 'localize.sh' for V.3.2 (ESIX)   Tim Evans
• Need debugger for SCO Unix   Evan B. Ross
• need for RTS/CTS at high speeds (was re: SCO RTS/CTS Setup)   Greg Andrews
• need for RTS/CTS at high speeds (was re: SCO RTS/CTS Setup)   Pete Holsberg
• need for RTS/CTS at high speeds (was re: SCO RTS/CTS Setup)   Greg Andrews
• need help compiling TeX3.1 on SCO xenix   klaus u schallhorn
• Need helping getting X386 started.   David William Vrona
• Need help on X11R4   C. S. Huang
• Need help with PC-Interface for RS-232 only   Harry A Levinson
• Need help with Roell X11R4   Hendrik Groeneveld
• Need help with Unisys 6000 hangup time   Winfried Koenig
• Need help with Unisys 6000 hangup time   Pete Gregory
• Need help with Unisys 6000 hangup time   Kevin Thomas
• Need to read DOS files from tape made by ATT_TAPE   Jim Smithson
• Networking DOS to Unix (Know about commercial products...)   Nathan D. Lane
• Network Time Server   Rich Braun
• Network Time Server   Klaus Steinberger
• Network Time Server   Marc Unangst
• Network Time Server   Georg S. Nikodym
• Network Time Server   Rich Braun
• New Login: need crypt   Eamonn McManus
• New Login: need crypt   Carl Ellison
• New Login: need crypt   Eamonn McManus
• New Login: need crypt   Nachiappan Muthu
• NFS problems ISC v2.1   Bill Kennedy
• No, nobody is left-handed (update on mouse silliness)   Dick Dunn
• node name, X386   Wei Jen Yeh
• node name, X386   Wm E. Davidsen Jr
• non-blocking accept(3I) wanted. (ISC's tcp/ip)   Hans Bayle
• non-blocking accept(3I) wanted. (ISC's tcp/ip)   David Burren
• Note for: ANDY BAKEN ....   geoff at vax1.mankato.msus.edu
• Olwm woes using Roell's X386   Thomas Hoberg
• Open Desktop and OS/2 on same machine   HERKERT,RALPH M.
• Open Desktop and OS/2 on same machine   Chuck Forsberg WA7KGX
• Orchid Prodesigner II and ISC   Richard Karasik
• Out of queue messages ???   John R. Brinkema
• out of swap space??   Andrew Davidson
• out of swap space??   Mark Garrett
• out of swap space??   Conor P. Cahill
• out of swap space??   Rick Farris
• out of swap space??   Andrew Davidson
• out of swap space??   Ray Shwake
• out of swap space??   terry linhardt
• out of swap space??   Jay Ts
• out of swap space??   Conor P. Cahill
• out of swap space??   Conor P. Cahill
• out of swap space??   Robert Withrow
• out of swap space??   Bill Vermillion
• out of swap space??   Phillip M. Vogel
• out of swap space??   terry linhardt
• out of swap space??   Michael Stefanik
• out of swap space??   Marco S Hyman
• out of swap space??   Gary Blumenstein
• panel.h missing from Esix 5.3.2-D?   Derek E. Terveer
• Parity error on AMI Mark IV motherboard   Stephen Hite
• PC UNIX SIG Meeting   Daniel P. Kionka
• PEMM.sys EMS.sys in VP/IX under ISC UNIX 2.2   Jose Dias
• Performance Monitor for Xenix   Bob Barker
• POSIX and ISC 2.2.x -- and gcc?   Marc Rossner
• POSIX and ISC 2.2.x -- and gcc?   Scott Bartram
• POSIX and ISC 2.2.x -- and gcc?   Jim Balter
• POSIX and ISC 2.2.x -- how many people are using this?   Karl Denninger
• POSIX and ISC 2.2.x -- how many people are using this?   Heiko Blume
• POSIX and ISC 2.2.x -- how many people are using this?   Eric Gisin
• POSIX and ISC 2.2.x -- how many people are using this?   Jim Balter
• POSIX and ISC 2.2.x -- how many people are using this?   Alex Martelli
• POSIX and ISC 2.2.x -- how many people are using this?   Heiko Blume
• POSIX and ISC 2.2.x -- how many people are using this?   Jim Balter
• POSIX and ISC 2.2.x -- how many people are using this?   Heiko Blume
• POSIX and ISC 2.2.x -- how many people are using this?   Van Gale
• PPP with SCO unix or ISC?   deraadt
• printer problem   C. S. Huang
• Problem Configuring SLIP   Paul Oddo
• Problems on resize Xwindow on ISC 2.02   Ralph Berg
• Problems to resize a Xwindow on ISC 2.0.2   Ralph Berg
• Problems with running VPIX from within an xterm   Paul Moore
• Problems with SIGPOLL using libsocket.a (BSD)   Christian Kasperbauer
• Problem with 3C503 card with ISC Unix 2.2   Eric Feigenson
• Problem with 3C503 card with ISC Unix 2.2   Michael J. Hammel
• Problem with C news under ISC 1.0.6 with history file size   Gary Heston
• Problem with C news under ISC 1.0.6 with history file size   Richard Todd
• Problem with X386   Christoph Splittgerber
• Problem with X386   Jim McKim
• Query: ESDI controllers for SCO Unix   Petri Wessman
• Question on 150 / 500 MB SCSI tape drives.   Studenten Vereniging Stack
• Questions about UNIX viruses   Dave Gilmour
• Questions about UNIX viruses   Robert Raisch
• Questions about UNIX viruses   Link_-_APO at cup.portal.com
• Questions about UNIX viruses   Rich Braun
• Radio clock time for Unix   Jan-Piet Mens at Logix GmbH, Wiesbaden
• Radio clock time for Unix   Ed Vielmetti
• ramdisk1of1 - RAM Disk Driver for UNIX on the PC   Berny Goodheart
• Rebooting Sys V/386   Derek E. Terveer
• Rebooting Sys V/386   Bob Daniel
• Rebooting Sys V/386   Thomas Hoberg
• references/books on 386 h/ware support for HLLs   Richard Siggs
• Remember 'conslog'?   Tom Armistead
• REPOST: Need advice on partitioning a HD   mhoffos at janus.mtroyal.ab.ca
• request for reviews - Unix, X   Andrew Gallo
• Request for source   DeVossA
• Retensioning tapes through wt(7) under ISC 3.2.2.1   Daniel A. Glasser
• Retensioning tapes through wt(7) under ISC 3.2.2.1   Support Account
• Retensioning tapes through wt(7) under ISC 3.2.2.1   Conor P. Cahill
• Rewritable optical drives and Interactive UNIX   John Vert
• RISC (Reduced Instruction-Set Chip) vs. CISC   Jason W. Tice
• RISC (Reduced Instruction-Set Chip) vs. CISC   Chin Fang
• RISC (Reduced Instruction-Set Chip) vs. CISC   terry a jones
• RISC (Reduced Instruction-Set Chip) vs. CISC   Chris Torek
• RISC (Reduced Instruction-Set Chip) vs. CISC   Robert Bernecky
• root and boot floppy on ISC   Greg A. Woods
• root and boot floppy on ISC   Marc Rossner
• root and boot floppy on ISC   Gary Heston
• root and boot floppy on ISC   Marc Rossner
• root and boot floppy on ISC   James P. H. Fuller
• root and boot floppy on ISC   Thomas Hoberg
• root and boot floppy on ISC   Jan Mikkelsen
• root and boot floppy on ISC   Brandon Brown
• RPC for Esix ?   Heiko Weber jun.
• RTS/CTS (was re: Help Telebit and SCO RTS/CTS Setup)   Pete Holsberg
• RTS/CTS (was re: Help Telebit and SCO RTS/CTS Setup)   Aron Burns
• RTS/CTS (was re: Help Telebit and SCO RTS/CTS Setup)   Pete Holsberg
• ruptime and rwho   Larry Snyder
• Saber-C for 386 unix   David Van Beveren
• Saber-C for 386 unix   Chin Fang
• Saber-C for 386 unix   Conor P. Cahill
• Saber-C for 386 unix   Checkpoint Technologies
• Saber-C for 386 unix   Ravinder Dhiman
• Scheme & 386 Unix   Patrick R. Brown
• SCO's curses   m.proudman
• SCO's curses   Paul Barton-Davis
• SCO's curses   Brandon S. Allbery KB8JRR/AA
• SCO's curses   Larry Philps
• SCO's execmail   JIM PICKERING
• SCO's execmail   Chip Yamasaki
• SCO 'su' replacement   Marc Unangst
• SCO 'su' replacement   Paul Slootman
• SCO 'su' replacement   Eamonn McManus
• SCO 'su' replacement   Doug Fields
• SCO 'su' replacement   Eamonn McManus
• sco.opendesktop newsgroup/mailing list gateway   Ed Hew happily using ksh
• SCO / ESIX / Interactiv Sys - UNIX ?   Andre Graber
• SCO 3.2.2 timezone bug   Ronald van der Pol
• SCO development on V.4   Wm E. Davidsen Jr
• scoinfo: Invalid Argument - where does is come from?   Chip Yamasaki
• SCO License security - another flame   Paul Barton-Davis
• SCO License security - another flame   Stuart Lynne
• SCO License security - another flame   Ralf U. Holighaus
• SCO License security - another flame   Marc Unangst
• SCO Mailing List   Dave Armbrust
• SCO ODT-NET Install problems   Santiago Newbery
• SCO ODT-NET Install problems   Ralf U. Holighaus
• sco odt install   Robert L. Holder at lone
• SCO ODT rebooting during installation   Tim Wright
• SCO printer-devices   Ilja Heitlager
• SCO printer-devices   Ronald van der Pol
• SCO printer-devices   Wu Liu
• SCO printer-devices   Martin Croome
• SCO response to the problem of daylight savings time   Scott Scheingold
• SCO RTSFLOW (was re: Help Telebit and SCO RTS/CTS Setup)   Greg Andrews
• SCO RTSFLOW (was re: Help Telebit and SCO RTS/CTS Setup)   Uwe Doering
• SCO RTSFLOW (was re: Help Telebit and SCO RTS/CTS Setup)   Greg Andrews
• SCO RTSFLOW (was re: Help Telebit and SCO RTS/CTS Setup)   Uwe Doering
• SCO RTSFLOW (was re: Help Telebit and SCO RTS/CTS Setup)   Greg Andrews
• SCO su dead? (was Re: ct won't run (was: SCO 'su' replacement))   Doug Fields
• SCO terminal driver 19" Cornerstone   BERNT M JOHNSEN
• SCO Unix 3.2.2 - Multiple Logins?   Doug Fields
• SCO Unix 3.2.2 - Multiple Logins?   Michael Stefanik
• SCO UNIX 3.2.2 Can't set login uid from cron   Bernd Hennig
• SCO UNIX 3.2.2 Can't set login uid from cron   Stuart Lynne
• SCO UNIX 3.2.2 Can't set login uid from cron   Eamonn McManus
• SCO UNIX 3.2.2 Can't set login uid from cron   Conor P. Cahill
• SCO UNIX 3.2.2 Can't set login uid from cron   Connor MacLeod
• SCO UNIX 3.2.2 Can't set login uid from cron   Marc Unangst
• SCO UNIX 3.2.2 Can't set login uid from cron   Eamonn McManus
• SCO UNIX 3.2.2 Can't set login uid from cron   Robert White
• SCO UNIX 3.2.2 Can't set login uid from cron   Dave Remien
• SCO Unix: Allright, WHERE IS IT ?   Craig Nelson
• SCO Unix ? Where the hell is it ?   Craig Nelson
• SCO UNIX bashing   Chip Salzenberg
• SCO UNIX bashing   Evan B. Ross
• SCO UNIX bashing   Larry Snyder
• SCO UNIX bashing   Brandon S. Allbery KB8JRR/AA
• SCO Unix MMDF/ELM 2.3PL11 problem   John R. MacMillan
• SCO Unix MMDF/ELM 2.3PL11 problem   Chip Rosenthal
• SCO Unix not ARPing on ethernet   James J Dempsey
• SCO Unix not ARPing on ethernet (summary)   James J Dempsey
• SCO UNIX or Open Desktop, what's the difference?   Robert Andersson
• SCO UNIX or Open Desktop, what's the difference?   Wu Liu
• SCO UNIX or Open Desktop, what's the difference?   Ralf U. Holighaus
• SCO Xsight grafinfo files (was Re: supervga.xgi)   IT Manager
• screen blanking, and other at&t questions   DYKES,DAVID PRESTON
• SCSI fix disk?   Rick Summerhill
• SCSI tape on 2nd ctlr under ISC 2.0.2   Tim Wright
• sendmail not delivering, just queueing   Steven H. Izen
• sendmail not delivering, just queueing   L. Hirschbiegel
• sendmail not delivering, just queueing   Steven H. Izen
• sendmail not delivering, just queueing   Conor P. Cahill
• Sendmail on ISC 2.2   Brandon Brown
• sendmail on SCO ODT + uucp   Robert A. Kukura
• sendmail on SCO ODT + uucp: SOLUTION   Lawrence Flon
• Sendmail under ODT 1.1 doesn't take stdin correctly   Ray Shwake
• sendmail weirdness   Osvaldo Gold
• Serial/Multiport Card for PS/2-80   Ray Shwake
• Setup problems with SCO SysV   Tom Yager
• Setup problems with SCO SysV   Ralf U. Holighaus
• Setup problems with SCO SysV   Brandon S. Allbery KB8JRR/AA
• Setup problems with SCO SysV   Ronald S H Khoo
• Setup problems with SCO SysV   Brandon S. Allbery KB8JRR/AA
• side-effects of applying updates (ISC 2.2.1)   leo at aai.com
• side-effects of applying updates (ISC 2.2.1)   leo at aai.com
• Simultaneous DMA   Brian Smith
• Simultaneous DMA   Conor P. Cahill
• Simultaneous DMA   John Watson
• Simultaneous DMA   Thomas Hoberg
• Simultaneous DMA   Derek E. Terveer
• Since Most Everythings's right with SCO Can we make it smaller?   neal at mnopltd.UUCP
• Since Most Everythings's right with SCO Can we make it smaller?   Marc Rossner
• Since Most Everythings's right with SCO Can we make it smaller?   Rich Braun
• Since Most Everythings's right with SCO Can we make it smaller?   Ronald S H Khoo
• Since Most Everythings's right with SCO Can we make it smaller?   Bill Vermillion
• Since Most Everythings's right with SCO Can we make it smaller?   Ray Shwake
• Since Most Everythings's right with SCO Can we make it smaller?   Peter da Silva
• Since Most Everythings's right with SCO Can we make it smaller?   Sean Eric Fagan
• Since Most Everythings's right with SCO Can we make it smaller?   neal at mnopltd.UUCP
• Since Most Everythings's right with SCO Can we make it smaller?   neal at mnopltd.UUCP
• Size difference between ESIX 386 and ISC X386 binaries and bugs?   Chin Fang
• SLIP under ESIX V 3.2 D?   Alan Clegg
• slower Esix after uarea bug fix?   Bill Heiser
• Snakebytes (long -- and poisonous?).   Peter da Silva
• Snakebytes (long -- and poisonous?).   Wm E Davidsen Jr
• Snakebytes (long -- and poisonous?).   Bob English
• Snakebytes (long -- and poisonous?).   Steve Blair
• sockets simulation library?   phil sutherland
• Solution to history file size under ISC 1.0.6 problem   Gary Heston
• Some testing of systems   Bruce Varney
• Son of ESIX sockets   DURIAN MICHAEL BLAINE
• Son of ESIX sockets   Tim Pozar
• Son of FAS?   Richard Foulk
• Son of FAS?   Uwe Doering
• Son of FAS?   Conor P. Cahill
• Son of FAS?   Dick Dunn
• Son of FAS?   Bill Kennedy
• Son of FAS?   Greg Andrews
• Son of FAS?   Karl Denninger
• Son of FAS?   Larry Snyder
• Source for pty driver behind /dev/ptmx   Mike Bernson
• Source for pty driver behind /dev/ptmx   David Van Beveren
• Source for STREAMS device drivers for Comms Cards wanted   Robert Hartill
• Specialix SI and ESIX   David Dix
• Specialix SI and ESIX   John Pettitt
• Spreadsheets for 386 Unix.   Jesse W. Asher
• Spreadsheets for 386 Unix.   Usenet news administrator
• Spreadsheets for 386 Unix.   Lars Magnusson
• Spreadsheets for 386 Unix.   Rick Farris
• Spreadsheets for 386 Unix.   Jonathan I. Kamens
• Spreadsheets for 386 Unix.   Steve Cohen
• ST01 driver for 386 unixes   Roland van Hout
• ST01 driver for 386 unixes   Le Tin
• Straight through to another port   Dave McLane
• Strange Problems with Interactive   Robert Innes
• Summary: 4-port cards   Dave McLane
• Summary: 4-port cards   Bill Heiser
• Summary: 4-port cards   Raymond Nijssen
• Summary: 4-port cards   Uwe Doering
• Summary: 4-port cards   Dave McLane
• Summary: 4-port cards   Uwe Doering
• Summary: 4-port cards   Dave McLane
• Summary: 4-port cards   Norman Kohn
• Summary: 4-port cards   Raymond Nijssen
• Summary: 4-port cards   Uwe Doering
• Summary: SVR4 and postscript printers.   Robert Withrow
• Summary: What's wrong with SCO   Dick Dunn
• Summary: What's wrong with SCO   Bill Kennedy
• Summary: What's wrong with SCO (long)   David Van Beveren
• Summary: What's wrong with SCO (long)   Fred Rump
• Summary: What's wrong with SCO (long)   Ronald S H Khoo
• Summary: What's wrong with SCO (long)   Paul Barton-Davis
• Summary: What's wrong with SCO (long)   Sean Eric Fagan
• Summary: What's wrong with SCO (long)   Fred Rump
• Summary: What's wrong with SCO (long)   Ronald S H Khoo
• Summary: What's wrong with SCO (long)   Rick Farris
• Summary: What's wrong with SCO (long)   Bob Palowoda
• Summary: What's wrong with SCO (long)   Ronald van der Pol
• Summary: What's wrong with SCO (long)   Dave L. Smith
• Summary: What's wrong with SCO (long)   Sean Eric Fagan
• Summary: What's wrong with SCO (long)   Peter da Silva
• Summary: What's wrong with SCO (long)   Peter da Silva
• Summary: What's wrong with SCO (long)   Sean Eric Fagan
• Summary: What's wrong with SCO (long)   David Van Beveren
• Summary and request for more info: NetBIOS client software for UNIX   Robert Andersson
• supervga.xgi   Wu Liu
• Suphys down for about one week   Glenn Geers
• Support of an LK250 (DEC) keyboard under ISC/ESIX/???   Daniel A. Glasser
• SVGA card for sale   Pete Sridharan
• SVR4.0   DA462CS at OPIE.BGSU.EDU
• SVR4.0   jrd at cc.usu.edu
• SVR4.0   Robert White
• SVR4.0   Wei Jen Yeh
• SVR4.0   Amrit Bains
• SVR4.0   Dave Close
• SVR4.0   Wm E. Davidsen Jr
• SVR4.0   Rick Kelly
• SVR4.0   Scott Evernden
• SVR4.0   Richard Ducoty
• SVR4.0   Jon Gefaell
• SVR4.0   Rick Kelly
• SVR4.0   jrd at cc.usu.edu
• SVR4.0   Tim Wright
• SVR4.0 (and hardware choices)   Dick Dunn
• SVR4.0; can I run it?   Odin Anderson
• SVR4.0; can I run it?   Odin Anderson
• SVR4.0; can I run it?   Lars Tunkrans
• SVR4: postio filter and /dev/lp---Does it work?   Robert Withrow
• SVR4: postio filter and /dev/lp---Does it work?   Robert Withrow
• SVR4: postio filter and /dev/lp---Does it work?   Lee Crocker
• SVR4: postio filter and /dev/lp---Does it work?   Andy Crump
• SVR4: postio filter and /dev/lp---Does it work?   Richard Ducoty
• svr4 for [34]86 info wanted   Steven C. Liu
• swap space not first partition   Bill Kennedy
• swap space not first partition   Ray Shwake
• swap space not first partition   Bill Vermillion
• System V, B0, and DTR.   Peter da Silva
• System V, B0, and DTR.   Leslie Mikesell
• System V, B0, and DTR.   Peter da Silva
• System V, B0, and DTR.   Root Boy Jim
• SystemV386 beginner: questions.   2fmmempty at kuhub.cc.ukans.edu
• SystemV386 beginner: questions.   david.r.connet
• System V driver for Colorado Jumbo Tape Backup needed   christophe a egert
• System V driver for Colorado Jumbo Tape Backup needed   michael.t.sedwick
• System V driver for Colorado Jumbo Tape Backup needed   Bill Vermillion
• System V driver for Colorado Jumbo Tape Backup needed   leo at aai.com
• System V Rel 3.0 for sale   Ronnie Hughes
• System V Rel 3.0 for sale   Rick Beetham
• System V rel 4 prices and info wanted.. (badly)   Peter Wemm
• SysVR4 UNIX :: Dell or UHC ???...   Steven J. Yohanan
• SZ/RZ >BINARY< for SCO UNIX386   Kenneth Jamieson
• tape backup and sysv386   Robert Bernecky
• Tape backup for ISC Unix   Dave Bullis
• Tape backup for ISC Unix   Conor P. Cahill
• tape drive info wanted.   Robert Bernecky
• tape drive info wanted.   Conor P. Cahill
• tape drive info wanted.   Karl Denninger
• tape drive info wanted.   Richard Foulk
• tape drive info wanted.   Robert Bernecky
• tape drive info wanted.   Dick Dunn
• tape drive info wanted.   Peter da Silva
• Tape Drives   News Administrator
• Tar tape recovery, how?   Jim Bevier - J B Systems
• TCP/IP/Novell/terminal emulator for Wollongong   Todd Ogasawara
• TERM variable and network login on ISC 2.2.1   Heimir Thor Sverrisson
• The swich with dailight savings time   Scott Scheingold
• The swich with dailight savings time   Ronald van der Pol
• The swich with dailight savings time   Israel Pinkas
• The swich with dailight savings time   Dick Heijne CCS/TS
• The swich with dailight savings time   Ben Knox
• The swich with dailight savings time   Othmar Klaassen
• The swich with dailight savings time   Usenet news administrator
• The swich with dailight savings time   Chris Linstruth
• The swich with dailight savings time   Dick Heijne CCS/TS
• The swich with dailight savings time   Ronald van der Pol
• The swich with dailight savings time   Lars Tunkrans
• The swich with dailight savings time   Tim Wright
• The swich with dailight savings time   Ronald van der Pol
• The swich with daylight savings time   Usenet news administrator
• The switch to daylight savings time   Andy Piziali
• time after Daylight Saving Time started   Ronald van der Pol
• timed & named bugs on SCO (Was: Network Time Server)   John Pettitt
• troff to dot matrix converter??   geoff at vax1.mankato.msus.edu
• ugly silly who(1) bug in AT&T V/386 3.2.2   Leslie Mikesell
• UHC SysV - any info????   Kurt Freiberger
• UHC SysV - any info????   Larry Snyder
• Unattributed statements   Dick Dunn
• Unattributed statements   Richard Foulk
• Unix 5.4 and ulimit   Christian Seyb
• Unix 5.4 and ulimit   Conor P. Cahill
• Unix 5.4 and ulimit   Scott Evernden
• Unix 5.4 and ulimit   john.urban
• Unix 5.4 and ulimit   Dave McCracken
• Unix 5.4 and ulimit   Richard Meesters
• Unix 5.4 and ulimit   Guy Harris
• Unix 5.4 and ulimit   Dave McCracken
• Unix 5.4 and ulimit   Dave McCracken
• Unix 5.4 and ulimit   Norman Kohn
• Unix 5.4 and ulimit   Derek E. Terveer
• Unix 5.4 and ulimit   David Fields
• Unix 5.4 and ulimit   Peter Galbavy
• Updated release of gcc/g++-1.39 with COFF gas-1.38.1   David Dawes
• Upgrades from anybody's UNIX 3.2 to ESIX 4.0 available   TECHbooks
• Upgrades from anybody's UNIX 3.2 to ESIX 4.0 available   Evan Leibovitch
• Upgrades from anybody's UNIX 3.2 to ESIX 4.0 available   Kayvan Sylvan
• Upgrades from anybody's UNIX 3.2 to ESIX 4.0 available   Dave McCracken
• Upgrades from anybody's UNIX 3.2 to ESIX 4.0 available   James Deibele
• Upgrading users from Xenix 3.x to Unix System V   Andre van Brussel
• UPS daemon   Jean-Pierre Radley
• UPS daemon   Pascal Gosselin
• Using Extended Dos partitions under DosMerge   Anthony Steele
• Using Gnu instead of the Development system   Len Reed
• Using Gnu instead of the Development system   Ken Seefried iii
• Using Gnu instead of the Development system   Steve Cirian
• Using Gnu instead of the Development system   Rich Braun
• Using Gnu instead of the Development system   Marc Unangst
• Using Gnu instead of the Development system   Thomas Kaulmann
• Using MS-DOS with the UNIX* system ?   john.t.wuu
• Using MS-DOS with the UNIX* system ?   john.urban
• Using MS-DOS with the UNIX* system ?   Larry Snyder
• Using MS-DOS with the UNIX* system ?   Bill Heiser
• Using MS-DOS with the UNIX* system ?   Leslie Mikesell
• Using MS-DOS with the UNIX* system ?   Pete Holsberg
• Using MS-DOS with the UNIX* system ?   Larry Snyder
• Using MS-DOS with the UNIX* system ?   Larry Snyder
• Using MS-DOS with the UNIX* system ?   Raymond Nijssen
• Using MS-DOS with the UNIX* system ?   jad at nyama.UUCP
• Using the -U option of lpadmin   John Temples
• Using the -U option of lpadmin   Tim Wright
• UUCP   Scott Scheingold
• Variable alignment in Unix Pascal   Heidi de Wet
• Ventura under ISC VPIX   Richard Karasik
• verbose batch output on console   Bill Stewart 908-949-0705 erebus.att.com!wcs
• VGA book   Didier Poirot
• video boards for X386   Alex Martelli
• VP/ix & ISC questions   Allan Schaffer
• vp/ix 1.2 under Herr Roell's X-windows?   Derek E. Terveer
• vpix / sco unix / dtk bios   Mark JeskeChicago Consultant
• vpix help   DYKES,DAVID PRESTON
• vpix help   Gary Coffman
• vpix help   Jose Dias
• wait3() in Posix jc? (was: POSIX and ISC 2.2.x)   Alex Martelli
• wait3() in Posix jc? (was: POSIX and ISC 2.2.x)   Chet Ramey
• WANTED: Best FORTRAN compiler for SCO UNIX/386 3.2.2 ODT 1.1   V P Demikhov
• WANTED: Best FORTRAN compiler for SCO UNIX/386 3.2.2 ODT 1.1   Geraldo Veiga
• Wanted: names of motherboards that work ok with STB & Adaptec   0000-Admin0000
• wanted: UNIX or clone   Rick Kelly
• wanted: UNIX or clone   John Macdonald
• wanted: UNIX or clone   Rick Kelly
• wanted: UNIX or clone   Larry Snyder
• wanted: UNIX or clone   Bill Heiser
• wanted: UNIX or clone   Rick Kelly
• wanted: UNIX or clone   flinton at eagle.wesleyan.edu
• wanted: UNIX or clone   Bill Heiser
• wanted: UNIX or clone   Rick Kelly
• wanted: UNIX or clone   Rick Kelly
• wanted: UNIX or clone   Bill Heiser
• wanted: UNIX or clone   Dick Dunn
• wanted: UNIX or clone   Rick Kelly
• wanted: UNIX or clone   Rick Kelly
• wanted: UNIX or clone   Shawn Blair
• wanted: UNIX or clone   Wm E. Davidsen Jr
• wanted: UNIX or clone   Larry Snyder
• wanted: UNIX or clone   Larry Snyder
• wanted: UNIX or clone   Peter da Silva
• wanted: UNIX or clone   Dick Dunn
• wanted: UNIX or clone   Bill Heiser
• wanted: UNIX or clone   Sean Eric Fagan
• wanted: UNIX or clone   Pete Holsberg
• wanted: UNIX or clone   Pete Holsberg
• wanted: UNIX or clone   Rick Kelly
• wanted: UNIX or clone   Rick Kelly
• wanted: UNIX or clone   Larry Snyder
• wanted: UNIX or clone   Larry Snyder
• wanted: UNIX or clone   Bill Heiser
• wanted: UNIX or clone   Geraldo Veiga
• wanted: UNIX or clone   Larry Snyder
• wanted: UNIX or clone   Geraldo Veiga
• wanted: UNIX or clone   Chin Fang
• wanted: UNIX or clone   Jay Ts
• wanted: UNIX or clone   Larry Snyder
• wanted: UNIX or clone   Geraldo Veiga
• wanted: UNIX or clone   Chin Fang
• wanted: UNIX or clone   Bill Heiser
• wanted: UNIX or clone   Bill Heiser
• wanted: UNIX or clone   Bill Heiser
• wanted: UNIX or clone   John Temples
• wanted: UNIX or clone   John Temples
• wanted: UNIX or clone   Tim Wright
• wanted: UNIX or clone   Bill Vermillion
• wanted: UNIX or clone (FFS performance)   Richard Foulk
• What's in a name? (was Re: wanted: UNIX or clone)   Evan Leibovitch
• What's in a name? (was Re: wanted: UNIX or clone)   John R. Levine
• What's in a name? (was Re: wanted: UNIX or clone)   Rahul Dhesi
• What's in a name? (was Re: wanted: UNIX or clone)   Ed Gould
• What's in a name? (was Re: wanted: UNIX or clone)   Ken Lerman
• What's in a name? (was Re: wanted: UNIX or clone)   Rahul Dhesi
• What's in a name? (was Re: wanted: UNIX or clone)   Keith Ericson
• What's wrong with SCO Unix   Rich Braun
• What is it? (was Re: Current Run-Level: How can you tell?)   David F. Skoll
• What is it? (was Re: Current Run-Level: How can you tell?)   Gary Weimer 253-7796
• What is it? (was Re: Current Run-Level: How can you tell?)   Peter Lamb
• What is it? (was Re: Current Run-Level: How can you tell?)   Dave Eisen
• What is it? (was Re: Current Run-Level: How can you tell?)   Jeff Leyser
• What is it? (was Re: Current Run-Level: How can you tell?)   News Administrator
• What is it? (was Re: Current Run-Level: How can you tell?)   Michael Stefanik
• What is UNIX? Re: wanted: UNIX or clone   Peter da Silva
• What is UNIX? Re: wanted: UNIX or clone   Alan Barclay
• What is UNIX? Re: wanted: UNIX or clone   Eamonn McManus
• What Problems Do you have with ISC TCP/IP?   Markus Richardson
• whats the latest ISC release ?   cm at jet.uucp
• Where are X386 binaries   Bob Palowoda
• Where do you get 386 BSD from ?   colin manning
• Where to purchase additional ISC 3.2.2 manuals   Dave Buonomo
• which library is regcmp and regex(3x) in?   Bruce M Ong
• Which UNIX? (for small 486 box -- seek advice)   flinton at eagle.wesleyan.edu
• Who upgrades to Sys Vr4?   Tom Armistead
• Who upgrades to Sys Vr4?   Larry Snyder
• wierd 'growreg' and 'getcpages' errors ISC 2.2 from tcp?   Stu Donaldson
• Word Perfect 5.0 for UNIX   Larry Snyder
• Word Perfect 5.0 for UNIX   Tony Russell
• Word Perfect 5.0 for UNIX   Larry Snyder
• Writing Driver   Brian Smith
• Writing Driver (and usleep)   Paul Barton-Davis
• Writing Driver (and usleep)   Mike Burg
• Wyse995-8 serial board   Thomas Strandenaes
• X.25 software for i386 - SUMMARY   Peter Ziobrzynski
• X.25 software for i386 needed   Peter Ziobrzynski
• X.25 software for i386 needed   Jan Mikkelsen
• X.25 software for i386 needed   Nathan D. Lane
• X.25 software for i386 needed   Marc Boucher
• X.25 software for i386 needed   Ralf U. Holighaus
• X11 for SCO   c60b-2gy at web-2d.berkeley.edu
• X386 & Compaq 386/20e - Anyone tried it??   Monte Bateman
• X386 & keyboard events   Paul Barton-Davis
• X386, epoch   Rick Summerhill
• X386 - Need help with clock.pas output...   Karl Bunch
• X386 - Sigma Legend & 9070S   Christoph Splittgerber
• X386 1.1a and PVGA1A 640x480x256 and Logitech Bus Mouse   Brad Karp
• X386 1.1a and PVGA1A 640x480x256 and Logitech Bus Mouse   Thomas Roell
• X386 1.1a under AT&T UNIX SYSTEM V Release 3.2.2   lu hongjiu - CS260
• X386 1.1a update, xterm keyboard problem   David Rector
• X386 and ATI   Brian Chan
• X386 and ATI   Chin Fang
• X386 and UNIXCONN   News Administrator
• X386 and UNIXCONN   Paul De Bra
• X386 binaries for SCO UNIX 3.2   Lawrence Harris
• X386 for sVr4.0   Wei Jen Yeh
• X386 Hardware experiences   Andrew J Michael
• X386 mouse/keyboard lockup   Jim McKim
• X386 mouse/keyboard lockup   Thomas Roell
• X386 on AT&T lockup problem   Paul De Bra
• X386 on AT&T lockup problem   Chin Fang
• X386 on AT&T lockup problem   Conor P. Cahill
• X386 on AT&T lockup problem   John A. Stark
• X386 on AT&T lockup problem   Chuck Murcko
• X386 on AT&T lockup problem   E.J. McKernan
• X386 on AT&T lockup problem   Robert Withrow
• X386 on AT&T lockup problem   David Van Beveren
• X386 on AT&T lockup problem   E.J. McKernan
• X386 on SCO Open Desktop   trevor at trevan.uucp
• X386 question (how does it compare?)   Craig E. Smith
• X386 under AT&T UNIX SYSTEM V Release 3.2.2   lu hongjiu - CS260
• X386 under ESIX 5.3.2   robsch
• X386 without TCP under ISC 2.0.2   Terry Mitchem
• xclock time off since dst on ISC 2.2 system   Marcus O. Ertle
• xfig with X386   David Dawes

Last message date: Tue Apr 30 23:57:08 AEST 1991
Archived on: Mon Feb 1 19:47:43 AEST 2016

• Messages sorted by: [ thread ] [ author ] [ date ]